Filamentstr
/
04_zumbach
Archived
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

rewrite main for 04_Messmodul

Browse Source
master
Eggert Jung 4 years ago
parent 939c3c5e63
commit 789d0035b1
1 changed files with 254 additions and 512 deletions
Show Stats Download Patch File Download Diff File

606
22_m1284p_WIZNET_MQTT/main.c
Unescape Escape View File

@ -1,51 +1,25 @@
/*
* main.c
*
* Created on: 22 нояб. 2018 г.
* Author: maxx
*/
#include <avr/io.h>
#include <util/delay.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include <compat/deprecated.h> //sbi, cbi etc..
#include "avr/wdt.h" // WatchDog
#include <stdio.h> // printf etc..
#include "string.h"
#include "uart_extd.h"
#include "spi.h"
#include "globals.h" //Global definitions for project
#include <avr/wdt.h> // WatchDog
#include <string.h>
#include "stdbool.h"
#include "Ethernet/socket.h"
#include "Ethernet/wizchip_conf.h"
#include "Application/loopback/loopback.h"
#include "Internet/MQTT/mqtt_interface.h"
#include "Internet/MQTT/MQTTClient.h"
#define _MAIN_DEBUG_
/*
* 22. MQTT + Mosquitto in LAN test
*
* Briefly:
* 1. Pub every 1 sec Analog && Digital values only:
* sta/analog/0 - A6/PA6
* sta/digital/0 - SW1/PC5
* 2. Pub every 10 sec Uptime && FreeRAM device statistic:
* /w5500_avr_dbg - Uptime: xxxx sec; Free RAM: xxxx bytes
* 3. Sub: Print out all received messages (Subscribe for all that begin from "/")
* 4. On lost connection with MQTT broker reboot device after ~ 20 sec.
*
* Used as base code from:
* Nadyrshin Ruslan - MQTTPacket (MQTT client/server v3.1.1 adapted for AVR MCU).
* YouTube-channel: https://www.youtube.com/channel/UChButpZaL5kUUl_zTyIDFkQ
*
* Author of unofficial porting to AVR Mega1284p/644p + W5500 Ethernet NIC (Wiznet sockets library using without Arduino):
* Ibragimov Maxim aka maxxir, Russia Togliatty 07.04.2019
*/
#include "avrIOhelper/io-helper.h"
#include "millis.h"
#include "uart.h"
#include "spi.h"
#include "mqtt.h"
#include "util/delay.h"
#define PLC_MQTT_ENABLED 0
Client mqtt_client;
//***********Prologue for fast WDT disable & and save reason of reset/power-up: BEGIN
uint8_t mcucsr_mirror __attribute__ ((section (".noinit")));
@ -62,330 +36,148 @@ void get_mcusr(void)
}
//***********Prologue for fast WDT disable & and save reason of reset/power-up: END
//*********Global vars
#define TICK_PER_SEC 1000UL
volatile unsigned long _millis; // for millis tick !! Overflow every ~49.7 days
//*********Program metrics
const char compile_date[] PROGMEM = __DATE__; // Mmm dd yyyy - Дата компиляции
const char compile_time[] PROGMEM = __TIME__; // hh:mm:ss - Время компиляции
const char str_prog_name[] PROGMEM = "\r\nAtMega1284p v1.2a Static IP MQTT && Loop-back WIZNET_5500 ETHERNET 07/04/2019\r\n"; // Program name
#if defined(__AVR_ATmega128__)
const char PROGMEM str_mcu[] = "ATmega128"; //CPU is m128
#elif defined (__AVR_ATmega2560__)
const char PROGMEM str_mcu[] = "ATmega2560"; //CPU is m2560
#elif defined (__AVR_ATmega2561__)
const char PROGMEM str_mcu[] = "ATmega2561"; //CPU is m2561
#elif defined (__AVR_ATmega328P__)
const char PROGMEM str_mcu[] = "ATmega328P"; //CPU is m328p
#elif defined (__AVR_ATmega32U4__)
const char PROGMEM str_mcu[] = "ATmega32u4"; //CPU is m32u4
#elif defined (__AVR_ATmega644P__)
const char PROGMEM str_mcu[] = "ATmega644p"; //CPU is m644p
#elif defined (__AVR_ATmega1284P__)
const char PROGMEM str_mcu[] = "ATmega1284p"; //CPU is m1284p
#else
const char PROGMEM str_mcu[] = "Unknown CPU"; //CPU is unknown
#endif
//******************* MQTT: BEGIN
#define SOCK_MQTT 2
// Receive Buffer
#define MQTT_BUFFER_SIZE 512 // 2048
uint8_t mqtt_readBuffer[MQTT_BUFFER_SIZE];
volatile uint16_t mes_id;
#define PUBLISH_ANALOG_0 "sta/analog/0"
#define PUBLISH_DIGITAL_0 "sta/digital/0"
#define PUBLISH_AVR_DEBUG "/w5500_avr_dbg"
//MQTT subscribe call-back is here
void messageArrived(MessageData* md)
{
char _topic_name[64] = "\0";
char _message[128] = "\0";
MQTTMessage* message = md->message;
MQTTString* topic = md->topicName;
strncpy(_topic_name, topic->lenstring.data, topic->lenstring.len);
strncpy(_message, message->payload, message->payloadlen);
PRINTF("<<MQTT Sub: [%s] %s", _topic_name , _message);
//md->topicName->
/*
for (uint8_t i = 0; i < md->topicName->lenstring.len; i++)
putchar(*(md->topicName->lenstring.data + i));
printf(" (%.*s)\r\n", (int32_t)message->payloadlen, (char*)message->payload);
*/
}
void mqtt_pub(Client* mqtt_client, char * mqtt_topic, char * mqtt_msg, int mqtt_msg_len)
{
static uint32_t mqtt_pub_count = 0;
static uint8_t mqtt_err_cnt = 0;
int32_t mqtt_rc;
wdt_reset();
PRINTF(">>MQTT pub msg №%lu ", ++mqtt_pub_count);
MQTTMessage pubMessage;
pubMessage.qos = QOS0;
pubMessage.id = mes_id++;
pubMessage.payloadlen = (size_t)mqtt_msg_len;
pubMessage.payload = mqtt_msg;
mqtt_rc = MQTTPublish(mqtt_client, mqtt_topic , &pubMessage);
//Analize MQTT publish result (for MQTT failover mode)
if (mqtt_rc == SUCCESSS)
{
mqtt_err_cnt = 0;
PRINTF(" - OK\r\n");
}
else
{
PRINTF(" - ERROR\r\n");
//Reboot device after 20 continuous errors (~ 20sec)
if(mqtt_err_cnt++ > 20)
{
PRINTF("Connection with MQTT Broker was lost!!\r\nReboot the board..\r\n");
while(1);
}
}
}
//******************* MQTT: END
//FUNC headers
static void avr_init(void);
void timer0_init(void);
//Wiznet FUNC headers
void print_network_information(void);
// RAM Memory usage test
int freeRam (void)
{
extern int __heap_start, *__brkval;
int v;
int _res = (int) &v - (__brkval == 0 ? (int) &__heap_start : (int) __brkval);
return _res;
}
void IO_LIBRARY_Init(void) {
uint8_t bufSize[] = {2, 2, 2, 2, 2, 2, 2, 2};
reg_wizchip_cs_cbfunc(spi_select, spi_deselect);
reg_wizchip_spi_cbfunc(spi_read, spi_write);
//reg_wizchip_spiburst_cbfunc(spi_rb_burst, spi_wb_burst);
//******************* MILLIS ENGINE: BEGIN
//ISR (TIMER0_COMP_vect )
ISR (TIMER0_COMPA_vect)
{
// Compare match Timer0
// Here every 1ms
_millis++; // INC millis tick
// Тест мигаем при в ходе в прерывание
// 500Hz FREQ OUT
// LED_TGL;
wizchip_init(bufSize, bufSize);
wizchip_setnetinfo(&netInfo);
//wizchip_setinterruptmask(IK_SOCK_0);
}
unsigned long millis(void)
{
unsigned long i;
cli();
// Atomic tick reading
i = _millis;
sei();
return i;
}
//******************* MILLIS ENGINE: END
//***************** UART0: BEGIN
// Assign I/O stream to UART
/* define CPU frequency in Mhz here if not defined in Makefile */
//#ifndef F_CPU
//#define F_CPU 16000000UL
//#endif
/* 19200 baud */
//#define UART_BAUD_RATE 19200
//#define UART_BAUD_RATE 38400
#define UART_BAUD_RATE 115200
static int uart0_putchar(char ch,FILE *stream);
static void uart0_rx_flash(void);
static FILE uart0_stdout = FDEV_SETUP_STREAM(uart0_putchar, NULL, _FDEV_SETUP_WRITE);
//PS. stdin не переназначаю, т.к. удобнее с ним работать через uart.h - api:
/*
* Т.е. например так
c = uart1_getc();
if (( c & UART_NO_DATA ) == 0)
{
uart1_putc( (unsigned char)c );
}
При этом чекаем что буфер приема не пуст и опрос идет неблокирующий (+ работаем через UART RX RINGBUFFER),
а если работаем в стиле stdin->getchar() там опрос блокируется пока символ не будет принят (поллинг)
через UART1_RX, т.е. неудобно.
*/
#define STEP_SIZE 5
#define TOP_VALUE 40
void do_luefter(){
static uint8_t fan_value = TOP_VALUE*0.8;
static uint8_t fan_state = 0;
// STDOUT UART0 TX handler
static int uart0_putchar(char ch,FILE *stream)
{
uart_putc(ch);
return 0;
if(!read_Input(IN_ANLAGE_EIN, LEVEL)){
fan_state = 0;
ioHelperSetBit(outStates, LED_LUEFTER, 0);
}
// Очищаем буфер приема UART1 RX (иногда нужно)
static void uart0_rx_flash(void)
{
// Считываем все из ring-buffer UART1 RX
unsigned int c;
do
{
c = uart_getc();
} while (( c & UART_NO_DATA ) == 0); // Check RX1 none-empty
else{
if (read_Input(BTN_LUEFTER_EIN, RISING)) {
#if PLC_MQTT_ENABLED
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/Luefter", "ein", 3);
#endif
OCR3B = TOP_VALUE/2;
fan_state = 1;
ioHelperSetBit(outStates, LED_LUEFTER, 1);
}
//***************** UART0: END
//***************** ADC: BEGIN
#ifndef ADC_DIV
//12.5MHz or over use this ADC reference clock
#define ADC_DIV (1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0) //:128 ADC Prescaler
if (read_Input(BTN_LUEFTER_AUS, RISING)) {
#if PLC_MQTT_ENABLED
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/Luefter", "aus", 3);
#endif
fan_state = 0;
ioHelperSetBit(outStates, LED_LUEFTER, 0);
}
#ifndef ADC_REF
// vcc voltage ref default
#define ADC_REF (1<<REFS0)
if (read_Input(BTN_LUEFTER_PLUS, RISING) && (fan_value+STEP_SIZE <= TOP_VALUE)) {
fan_value += STEP_SIZE;
#if PLC_MQTT_ENABLED
char _msg[3];
sprintf(_msg, "%d", fan_value);
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/Speed", _msg, 3);
#endif
void adc_init(void)
{
ADCSRA = 0;
ADCSRA |= (ADC_DIV); // ADC reference clock
ADMUX |= (ADC_REF); // Voltage reference
ADCSRA |= (1<<ADEN); // Turn on ADC
ADCSRA |= (1<<ADSC); // Do an initial conversion because this one is the
// slowest and to ensure that everything is up
// and running
printf("luefter %d\n\r", fan_value);
}
uint16_t adc_read(uint8_t channel)
{
ADMUX &= 0b11100000; //Clear the older channel that was read
ADMUX |= channel; //Defines the new ADC channel to be read
ADCSRA |= (1<<ADSC); //Starts a new conversion
while(ADCSRA & (1<<ADSC)); //Wait until the conversion is done
return ADCW; //Returns the ADC value of the chosen channel
if (read_Input(BTN_LUEFTER_MINUS, RISING) && (fan_value-STEP_SIZE >= STEP_SIZE)) {
fan_value -= STEP_SIZE;
printf("luefter %d\n\r", fan_value);
}
}
//***************** ADC: END
//***************** WIZCHIP INIT: BEGIN
#define SOCK_TCPS 0
#define SOCK_UDPS 1
#define PORT_TCPS 5000
#define PORT_UDPS 3000
#define ETH_MAX_BUF_SIZE LOOPBACK_DATA_BUF_SIZE
if(fan_state)
OCR3B = fan_value;
else
OCR3B = 0;
}
unsigned char ethBuf0[ETH_MAX_BUF_SIZE];
unsigned char ethBuf1[ETH_MAX_BUF_SIZE];
void do_zumbach(){
void cs_sel() {
SPI_WIZNET_ENABLE();
if (read_Input(BTN_ZUMBACH_EIN, RISING) && read_Input(IN_ANLAGE_EIN, LEVEL)) {
ioHelperSetBit(outStates, SCHUETZ_ZUMBACH, 1);
ioHelperSetBit(outStates, LED_ZUMBACH, 1);
#if PLC_MQTT_ENABLED
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/Zumbach", "ein", 3);
#endif
}
void cs_desel() {
SPI_WIZNET_DISABLE();
if (read_Input(BTN_ZUMBACH_AUS, RISING) || read_Input(IN_ANLAGE_EIN, FALLING)) {
ioHelperSetBit(outStates, SCHUETZ_ZUMBACH, 0);
ioHelperSetBit(outStates, LED_ZUMBACH, 0);
#if PLC_MQTT_ENABLED
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/Zumbach", "aus", 3);
#endif
}
uint8_t spi_rb(void) {
uint8_t rbuf;
//HAL_SPI_Receive(&hspi1, &rbuf, 1, HAL_MAX_DELAY);
SPI_READ(rbuf);
return rbuf;
}
void spi_wb(uint8_t b) {
//HAL_SPI_Transmit(&hspi1, &b, 1, HAL_MAX_DELAY);
SPI_WRITE(b);
void do_notaus(){
if(read_Input(IN_NOTAUS_ANLAGE, LEVEL) || read_Input(IN_NOTAUS_SCHRANK, LEVEL)){ // NOTAUS
set_Output(LED_GRN_NOTAUS_SCHRANK, OFF); // disable green lamps
set_Output(LED_GRN_NOTAUS_ANLAGE, OFF);
}
void spi_rb_burst(uint8_t *buf, uint16_t len) {
//HAL_SPI_Receive_DMA(&hspi1, buf, len);
//while(HAL_SPI_GetState(&hspi1) == HAL_SPI_STATE_BUSY_RX);
for (uint16_t var = 0; var < len; var++) {
SPI_READ(*buf++);
if(read_Input(IN_NOTAUS_ANLAGE, LEVEL) && read_Input(IN_NOTAUS_SCHRANK, LEVEL)){ // both activated
set_Output(LED_ROT_NOTAUS_ANLAGE, BLINK);
set_Output(LED_ROT_NOTAUS_SCHRANK, BLINK);
}
else if(read_Input(IN_NOTAUS_ANLAGE, LEVEL)){ // top one activated
set_Output(LED_ROT_NOTAUS_ANLAGE, BLINK);
set_Output(LED_ROT_NOTAUS_SCHRANK, ON);
}
void spi_wb_burst(uint8_t *buf, uint16_t len) {
//HAL_SPI_Transmit_DMA(&hspi1, buf, len);
//while(HAL_SPI_GetState(&hspi1) == HAL_SPI_STATE_BUSY_TX);
for (uint16_t var = 0; var < len; var++) {
SPI_WRITE(*buf++);
else if(read_Input(IN_NOTAUS_SCHRANK, LEVEL)){ // bottom one activated
set_Output(LED_ROT_NOTAUS_SCHRANK, BLINK);
set_Output(LED_ROT_NOTAUS_ANLAGE, ON);
}
else{ // none activated
set_Output(LED_ROT_NOTAUS_SCHRANK, OFF);
set_Output(LED_ROT_NOTAUS_ANLAGE, OFF);
if(read_Input(IN_ANLAGE_EIN, LEVEL)){
set_Output(LED_GRN_NOTAUS_ANLAGE, ON);
set_Output(LED_GRN_NOTAUS_SCHRANK, ON);
}
else{
set_Output(LED_GRN_NOTAUS_ANLAGE, BLINK);
set_Output(LED_GRN_NOTAUS_SCHRANK, BLINK);
}
}
void IO_LIBRARY_Init(void) {
uint8_t bufSize[] = {2, 2, 2, 2, 2, 2, 2, 2};
reg_wizchip_cs_cbfunc(cs_sel, cs_desel);
reg_wizchip_spi_cbfunc(spi_rb, spi_wb);
reg_wizchip_spiburst_cbfunc(spi_rb_burst, spi_wb_burst);
wizchip_init(bufSize, bufSize);
wizchip_setnetinfo(&netInfo);
//wizchip_setinterruptmask(IK_SOCK_0);
}
//***************** WIZCHIP INIT: END
int main()
{
//uint8_t prev_sw1 = 1; // VAR for sw1 pressing detect
// INIT MCU
avr_init();
spi_init(); //SPI Master, MODE0, 4Mhz(DIV4), CS_PB.3=HIGH - suitable for WIZNET 5x00(1/2/5)
//spi_speed_tst(); / Here on SPI pins: MOSI 400Khz freq out, on SCLK 3.2MhzOUT (Witk SPI CLK 4Mhz)
// Print program metrics
PRINTF("%S", str_prog_name);// Название программы
PRINTF("Compiled at: %S %S\r\n", compile_time, compile_date);// Время Дата компиляции
PRINTF(">> MCU is: %S; CLK is: %luHz\r\n", str_mcu, F_CPU);// MCU Name && FREQ
PRINTF(">> Free RAM is: %d bytes\r\n", freeRam());
ioHelperInitBuffer();
ioHelperIoConf();
//Wizchip WIZ5500 Ethernet initialize
IO_LIBRARY_Init(); //After that ping must working
print_network_information();
//Short Blink LED 3 times on startup
unsigned char i = 3;
while(i--)
{
led1_high();
_delay_ms(100);
led1_low();
_delay_ms(400);
wdt_reset();
}
#if PLC_MQTT_ENABLED
//****************MQTT client initialize
//Find MQTT broker and connect with it
uint8_t mqtt_buf[100];
int32_t mqtt_rc = 0;
Network mqtt_network;
Client mqtt_client;
mqtt_network.my_socket = SOCK_MQTT;
// Можно определить IP узла по DNS-имени, IP узла будет в массиве targetIP
//DNS_init(1, tempBuffer);
//DNS_run(gWIZNETINFO.dns, "test.mosquitto.org", targetIP);
PRINTF(">>Trying connect to MQTT broker: %d.%d.%d.%d ..\r\n", MQTT_targetIP[0], MQTT_targetIP[1], MQTT_targetIP[2], MQTT_targetIP[3]);
printf(">>Trying connect to MQTT broker: %d.%d.%d.%d ..\r\n", MQTT_targetIP[0], MQTT_targetIP[1], MQTT_targetIP[2], MQTT_targetIP[3]);
NewNetwork(&mqtt_network);
ConnectNetwork(&mqtt_network, MQTT_targetIP, 1883);
MQTTClient(&mqtt_client, &mqtt_network, 1000, mqtt_buf, 100, mqtt_readBuffer, MQTT_BUFFER_SIZE);
@ -394,113 +186,85 @@ int main()
MQTTPacket_connectData data = MQTTPacket_connectData_initializer;
data.willFlag = 0;
data.MQTTVersion = 4;//3;
data.clientID.cstring = (char*)"w5500_avr_client";
data.username.cstring = (char*)"user1234";
data.clientID.cstring = (char*)"controllino";
data.username.cstring = (char*)"Messmodul";
data.password.cstring = (char*)"\0";
data.keepAliveInterval = 60;
data.keepAliveInterval = 10;
data.cleansession = 1;
mqtt_rc = MQTTConnect(&mqtt_client, &data);
if (mqtt_rc == SUCCESSS)
{
PRINTF("++MQTT Connected SUCCESS: %ld\r\n", mqtt_rc);
printf("++MQTT Connected SUCCESS: %ld\r\n", mqtt_rc);
}
else
{
PRINTF("--MQTT Connected ERROR: %ld\r\n", mqtt_rc);
while(1);//Reboot the board
printf("--MQTT Connected ERROR: %ld\r\n", mqtt_rc);
//while(1); //Reboot the board
}
// Subscribe to all topics
char SubString[] = "/#";// Subscribe for all that begin from "/"
char SubString[] = "/Filamentanlage/04_Messmodul/set/#";
mqtt_rc = MQTTSubscribe(&mqtt_client, SubString, QOS0, messageArrived);
PRINTF("Subscribed (%s) %d\r\n", SubString, mqtt_rc);
printf("Subscribed (%s) %ld\r\n", SubString, mqtt_rc);
#endif
uint32_t timer_link_1sec = millis();
uint32_t timer_uptime_60sec = millis();
uint32_t timer_mqtt_pub_1sec = millis();
while(1)
{
//Here at least every 1sec
wdt_reset(); // WDT reset at least every sec
ioHelperSetBit(outStatesBlinking, LED_PLC_OK, 1);
//Use Hercules Terminal to check loopback tcp:5000 and udp:3000
/*
* https://www.hw-group.com/software/hercules-setup-utility
*
*/
loopback_tcps(SOCK_TCPS,ethBuf0,PORT_TCPS);
loopback_udps(SOCK_UDPS,ethBuf0,PORT_UDPS);
uint32_t timer_blink_outs = millis();
uint32_t timer_send_uptime = millis();
// MQTT pub event every 1 sec
if((millis()-timer_mqtt_pub_1sec)> 1000)
{
//here every 1 sec
timer_mqtt_pub_1sec = millis();
static uint8_t mqtt_10sec_cnt =0;
static char _msg[64] = "\0";
static int _len;
//Every 1sec send status POT A6 (ADC input)
_len = SPRINTF(_msg, "%u", adc_read(6));
if(_len > 0)
{
mqtt_pub(&mqtt_client, PUBLISH_ANALOG_0, _msg, _len);
}
OCR3B = 127;
// && SW1 (GPIO input)
uint16_t val = sw1_read()?0:!0;
_len = SPRINTF(_msg, "%u", val);
if(_len > 0)
while(1)
{
mqtt_pub(&mqtt_client, PUBLISH_DIGITAL_0, _msg, _len);
}
wdt_reset(); // WDT reset at least every sec
//Every 10sec public message: "Uptime: xxx sec; Free RAM: xxxxx bytes" to "/w5500_avr_dbg"
if(++mqtt_10sec_cnt>9)
{
mqtt_10sec_cnt = 0;
_len = SPRINTF(_msg, "Uptime: %lu sec; Free RAM: %d bytes\r\n", millis()/1000, freeRam());
if(_len > 0)
{
mqtt_pub(&mqtt_client, PUBLISH_AVR_DEBUG, _msg, _len);
}
}
//if (flag_refresh_inStates) {
ioHelperReadPins();
ioHelperDebounce();
ioHelperEdgeDetector();
// flag_refresh_inStates = 0;
//}
// Toggle all outs which are set to blinking
if(millis() - timer_blink_outs > 500){
outStates[0] ^= outStatesBlinking[0];
outStates[1] ^= outStatesBlinking[1];
timer_blink_outs = millis();
}
// MQTT broker connection and sub receive
MQTTYield(&mqtt_client, 100);//~100msec blocking here
#if PLC_MQTT_ENABLED
// send misc info
if(millis() - timer_send_uptime > 5000){
timer_send_uptime += 5000;
char msg[64];
sprintf(msg, "%ld", millis()/1000);
mqtt_pub(&mqtt_client, "/Filamentanlage/04_Messmodul/state/uptime", msg, strlen(msg));
}
#endif
if((millis()-timer_link_1sec)> 1000)
{
//here every 1 sec
timer_link_1sec = millis();
if(wizphy_getphylink() == PHY_LINK_ON)
{
led1_high();
}
else
{
led1_low();
}
if(read_Input(BTN_ANLAGE_EIN, RISING)){
printf("anlage in: %x\n\r", read_Input(IN_ANLAGE_EIN, LEVEL));
}
// ioHelperSetBit(outStates, LED_GRN_NOTAUS_SCHRANK, 1);
//}
//else{
// ioHelperSetBit(outStates, LED_GRN_NOTAUS_SCHRANK, 0);
//}
if((millis()-timer_uptime_60sec)> 60000)
{
//here every 60 sec
timer_uptime_60sec = millis();
#ifdef CHK_RAM_LEAKAGE
//Printout RAM usage every 1 minute
PRINTF(">> Free RAM is: %d bytes\r\n", freeRam());
#endif
do_luefter();
do_notaus();
do_zumbach();
#ifdef CHK_UPTIME
//Printout RAM usage every 1 minute
PRINTF(">> Uptime %lu sec\r\n", millis()/1000);
#if PLC_MQTT_ENABLED
ioHelperSetBit(outStates, LED_BUS_OK, 1);
ioHelperSetOuts();
MQTTYield(&mqtt_client, 10); //blocking call
ioHelperSetBit(outStates, LED_BUS_OK, 0);
#endif
}
ioHelperSetOuts();
}
return 0;
}
@ -510,20 +274,23 @@ int main()
// Used for millis() timing
void timer0_init(void)
{
/*
*
* For M128
TCCR0 = (1<<CS02)|(1<<WGM01); //TIMER0 SET-UP: CTC MODE & PS 1:64
OCR0 = 249; // 1ms reach for clear (16mz:64=>250kHz:250-=>1kHz)
TIMSK |= 1<<OCIE0; //IRQ on TIMER0 output compare
*/
//For M664p
TCCR0A = (1<<WGM01); //TIMER0 SET-UP: CTC MODE
TCCR0B = (1<<CS01)|(1<<CS00); // PS 1:64
OCR0A = 249; // 1ms reach for clear (16mz:64=>250kHz:250-=>1kHz)
TIMSK0 |= 1<<OCIE0A; //IRQ on TIMER0 output compareA
}
void timer3_init(void)
{
TCCR3A |= (1<<WGM30); // PWM Mode with ocra top
TCCR3B |= (1<<WGM33);
OCR3A = TOP_VALUE;
TCCR3B |= (0<<CS32)|(1<<CS31)|(0<<CS30); // PS 1:1
TCCR3A |= (1<<COM3B1) | (0<<COM3B0);
DDRE |= 1 << 4;
}
static void avr_init(void)
{
// Initialize device here.
@ -532,33 +299,8 @@ static void avr_init(void)
wdt_reset(); // wdt reset ~ every <2000ms
timer0_init();// Timer0 millis engine init
// Initial UART Peripheral
/*
* Initialize uart11 library, pass baudrate and AVR cpu clock
* with the macro
* uart1_BAUD_SELECT() (normal speed mode )
* or
* uart1_BAUD_SELECT_DOUBLE_SPEED() ( double speed mode)
*/
#if (UART_BAUD_RATE == 115200)
uart_init( UART_BAUD_SELECT_DOUBLE_SPEED(UART_BAUD_RATE,F_CPU) ); // To works without error on 115200 bps/F_CPU=16Mhz
#else
uart_init( UART_BAUD_SELECT(UART_BAUD_RATE,F_CPU) );
#endif
// Define Output/Input Stream
stdout = &uart0_stdout;
//ADC init
adc_init();
adc_read(0); //Dummy read
led1_conf();
led1_low();// LED1 is OFF
sw1_conf();//SW1 internal pull-up
timer3_init();
uart_init();
sei(); //re-enable global interrupts
@ -570,20 +312,20 @@ void print_network_information(void)
uint8_t tmpstr[6] = {0,};
ctlwizchip(CW_GET_ID,(void*)tmpstr); // Get WIZCHIP name
PRINTF("\r\n=======================================\r\n");
PRINTF(" WIZnet chip: %s \r\n", tmpstr);
PRINTF("=======================================\r\n");
printf("\r\n=======================================\r\n");
printf(" WIZnet chip: %s \r\n", tmpstr);
printf("=======================================\r\n");
wiz_NetInfo gWIZNETINFO;
wizchip_getnetinfo(&gWIZNETINFO);
if (gWIZNETINFO.dhcp == NETINFO_STATIC)
PRINTF("STATIC IP\r\n");
printf("STATIC IP\r\n");
else
PRINTF("DHCP IP\r\n");
PRINTF("Mac address: %02x:%02x:%02x:%02x:%02x:%02x\n\r",gWIZNETINFO.mac[0],gWIZNETINFO.mac[1],gWIZNETINFO.mac[2],gWIZNETINFO.mac[3],gWIZNETINFO.mac[4],gWIZNETINFO.mac[5]);
PRINTF("IP address : %d.%d.%d.%d\n\r",gWIZNETINFO.ip[0],gWIZNETINFO.ip[1],gWIZNETINFO.ip[2],gWIZNETINFO.ip[3]);
PRINTF("SM Mask : %d.%d.%d.%d\n\r",gWIZNETINFO.sn[0],gWIZNETINFO.sn[1],gWIZNETINFO.sn[2],gWIZNETINFO.sn[3]);
PRINTF("Gate way : %d.%d.%d.%d\n\r",gWIZNETINFO.gw[0],gWIZNETINFO.gw[1],gWIZNETINFO.gw[2],gWIZNETINFO.gw[3]);
PRINTF("DNS Server : %d.%d.%d.%d\n\r",gWIZNETINFO.dns[0],gWIZNETINFO.dns[1],gWIZNETINFO.dns[2],gWIZNETINFO.dns[3]);
printf("DHCP IP\r\n");
printf("Mac address: %02x:%02x:%02x:%02x:%02x:%02x\n\r",gWIZNETINFO.mac[0],gWIZNETINFO.mac[1],gWIZNETINFO.mac[2],gWIZNETINFO.mac[3],gWIZNETINFO.mac[4],gWIZNETINFO.mac[5]);
printf("IP address : %d.%d.%d.%d\n\r",gWIZNETINFO.ip[0],gWIZNETINFO.ip[1],gWIZNETINFO.ip[2],gWIZNETINFO.ip[3]);
printf("SM Mask : %d.%d.%d.%d\n\r",gWIZNETINFO.sn[0],gWIZNETINFO.sn[1],gWIZNETINFO.sn[2],gWIZNETINFO.sn[3]);
printf("Gate way : %d.%d.%d.%d\n\r",gWIZNETINFO.gw[0],gWIZNETINFO.gw[1],gWIZNETINFO.gw[2],gWIZNETINFO.gw[3]);
printf("DNS Server : %d.%d.%d.%d\n\r",gWIZNETINFO.dns[0],gWIZNETINFO.dns[1],gWIZNETINFO.dns[2],gWIZNETINFO.dns[3]);
}