Filamentstr/04_zumbach
Archived
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add push event (P13/PD.5 toggle every 10 sec && send state P13 to BLYNK

Browse Source 
server)
This commit is contained in:
maxxir_w
2019-03-15 09:25:41 +04:00
parent 476de6c47f
commit df1ef9a57f
5 changed files with 45 additions and 44 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
19_m1284p_WIZNET_blynk/main.c
View File

@@ -65,6 +65,7 @@ uint8_t Domain_IP[4] = {0, }; // Translated IP address by DNS S
* OK (v1.4)Analog Read/Write
* OK (v1.5)Restore pins state on board reboot
* OK ??3.Try fix frequent reconnection with blynk server - every ~22sec may be this OK.
* OK (v1.6) Add push event (P13/PD.5 toggle every 10 sec && send state P13 to BLYNK server)
* Need compare local blynk.c code with modern <blynk> library - (Too old version here - 0.2.1 (On git blynk March 2019 - 0.6.x) )
*
* (3) Trying WIZNET5500 init with using official Wiznet ioLibrary_Driver
@@ -100,7 +101,7 @@ volatile unsigned long _millis; // for millis tick !! Overflow every ~49.7 days
//*********Program metrics
const char compile_date[] PROGMEM = __DATE__; // Mmm dd yyyy - Дата компиляции
const char compile_time[] PROGMEM = __TIME__; // hh:mm:ss - Время компиляции
const char str_prog_name[] PROGMEM = "\r\nAtMega1284p v1.5 Static IP BLYNK WIZNET_5500 ETHERNET 14/03/2019\r\n"; // Program name
const char str_prog_name[] PROGMEM = "\r\nAtMega1284p v1.6 Static IP BLYNK WIZNET_5500 ETHERNET 14/03/2019\r\n"; // Program name
#if defined(__AVR_ATmega128__)
const char PROGMEM str_mcu[] = "ATmega128"; //CPU is m128
@@ -382,42 +383,12 @@ void IO_LIBRARY_Init(void) {
}
//***************** WIZCHIP INIT: END
/*
void spi_speed_tst(void)
{
// Here on SPI pins: MOSI 400Khz freq out, on SCLK 3.2MhzOUT
while(1)
{
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
SPI_WRITE(0xF0);
}
}
*/
int main()
{
//uint8_t prev_sw1 = 1; // VAR for sw1 pressing detect
// INIT MCU
avr_init();
spi_init(); //SPI Master, MODE0, 4Mhz(DIV4), CS_PB.3=HIGH - suitable for WIZNET 5x00(1/2/5)
//spi_speed_tst(); / Here on SPI pins: MOSI 400Khz freq out, on SCLK 3.2MhzOUT (Witk SPI CLK 4Mhz)
// Print program metrics
@@ -499,6 +470,7 @@ int main()
// Test for Ethernet data transfer validation
uint32_t timer_tick_1sec = millis();
uint8_t blynk_restore_connection = 1;
uint8_t timer_led2_push_10sec = 0;
while(1)
{
//Here at least every 1sec
@@ -506,17 +478,7 @@ int main()
// Blynk process handler
blynk_run();
//Use Hercules Terminal to check loopback tcp:5000 and udp:3000
/*
* https://www.hw-group.com/software/hercules-setup-utility
* */
//loopback_tcps(SOCK_TCPS,ethBuf0,PORT_TCPS);
//loopback_udps(SOCK_UDPS,ethBuf0,PORT_UDPS);
//loopback_ret = loopback_tcpc(SOCK_TCPS, gDATABUF, destip, destport);
//if(loopback_ret < 0) printf("loopback ret: %ld\r\n", loopback_ret); // TCP Socket Error code
//Here every 1sec
//Here every 1sec event
if((millis()-timer_tick_1sec)> 1000)
{
//here every 1 sec
@@ -532,6 +494,14 @@ int main()
blynk_syncAll();
}
}
//Every 10sec event for LED2 PIN13
if(++timer_led2_push_10sec == 10)
{
timer_led2_push_10sec = 0; //Clear timer_led2..
//Every 10sec toggle, and push LED2 PIN13/PD5 state to BLYNK server
led2_tgl();
blynk_push_pin(13);
}
}
}
return 0;
@@ -589,6 +559,9 @@ static void avr_init(void)
led1_conf();
led1_low();// LED1 is OFF
led2_conf();
led2_low();//LED2 is OFF
sw1_conf();//SW1 internal pull-up