## Network Config

|Parameter| Value
|---------|-------------
| IP Adr. | 192.168.5.1
| Subnet  | 255.255.0.0
| MAC     | 00-08-dc-ab-cd-f0

### MQTT

#### Connect to MQTT Host 192.168.5.2

##### Publish
|Topic                                                   |Values         | Unit
|--------------------------------------------------------|------------   |-------
|/Filamentanlage/05_Abzug/state/abzug/speed              | 10 - 1000     | mm/s 
|/Filamentanlage/05_Abzug/state/abzug/onoff              | True/False    |
|/Filamentanlage/05_Abzug/state/kraft                    | 24-bit signed | mN
|/Filamentanlage/05_Abzug/state/speicher/pos             | 32-bit unsigned (valid: 0~1000000) | Steps
|/Filamentanlage/04_Abzug/state/uptime                   | 32-bit unsigned | milliseconds

##### Subscribe

|Topic                                                   |Values         | Unit
|--------------------------------------------------------|------------   |-------
|/Filamentanlage/05_Abzug/set/#                          |               |       

## Hardware usage

### Timers

|Timer|  Type  | Usage                         | Mode                   | used ISRs      | Output connected
|-----|--------|-------------------------------|------------------------|----------------|------------------
|  0  |  8 bit | Millis Tick Timer (1kHz)      | 2 (CTC)                | COMPA          | -
|  1  | 16 bit |                               |                        |                |
|  2  |  8 bit | Modbus Tick Timer (10kHz)     | 2 (CTC)                | COMPA          | -
|  3  | 16 bit | Step Signal Abzugsrolle       | 8 (PWM, Phase & Freq.) | -              | OC3B / PE4
|  4  | 16 bit | Step Signal Taenzer           | 8 (PWM, Phase & Freq.) | OVF, ~~COMPA~~ | OC4A / PH3
|  5  | 16 bit | Step Signal Rotation Spule    | 8 (PWM, Phase & Freq.) | -              | OC5C / PL5

### UART

|UART| Usage
|----|----------------------------------
|  0 | Debug Prints (connected to USB)
|  1 |
|  2 |
|  3 | Modbus (connected to MAX485)
