copy uart from atmega16 project

wont compile right now!

code/inc/uart.h

@@ -1,13 +1,13 @@
-#ifndef _UART_H
+#ifndef _UART_H_
-#define _UART_H
+#define _UART_H_
+
+#include <stdio.h>
 
 #define BAUD 9600
-#define MYUBRR F_CPU/16/BAUD-1
+#define BAUDRATE ((F_CPU)/(BAUD*16UL)-1)
 
-void USART_Init(unsigned int ubrr);
+void uart_init (void);
-void USART_Transmit(unsigned char data );
+void read_sync(char buffer[], uint8_t buffersize, uint8_t * bufferindex);
-void uart_puts( char* string);
-int putchar(int c);
-void search_i2c_devices(void);
 
 #endif
+

code/makefile

@@ -1,6 +1,6 @@
 MCU = atmega1284
 TARGET = main
-AVRDUDE_PROGRAMMER = usbasp-clone
+AVRDUDE_PROGRAMMER = atmelice_isp
 FCPU=16000000L
 
 BUILDDIR=build
@@ -45,7 +45,7 @@ CC = avr-gcc
 OBJCOPY = avr-objcopy
 OBJDUMP = avr-objdump
 SIZE = avr-size
-AVRDUDE = ./avrdude
+AVRDUDE = avrdude
 
 
 REMOVE = rm -f

code/src/main.c

@@ -17,8 +17,8 @@
 */
 
 volatile int counter = 0;
-char text[22] = {'F','R','o','h','e',' ',' ','W','e','i','h','n','a','c','h','t','e', 'n', ' ',' ', ' ', ' '};
+//char text[22] = {'F','R','o','h','e',' ',' ','W','e','i','h','n','a','c','h','t','e', 'n', ' ',' ', ' ', ' '};
-//char text[18] = {'1','2','3','4','5','6','7','8','9','t','s','c','a','f','e',' ', ' ', ' '};
+char text[18] = {'1','2','3','4','5','6','7','8','9','t','s','c','a','f','e',' ', ' ', ' '};
 int offset = 0;
 int animationtimer = 0;
 int stringlength = 22;
@@ -34,8 +34,8 @@ int main(void){
   setup();
 
   while(1){
- 	//putchar('c');
+ 	putchar('c');
- 	//_delay_ms(50);
+ 	_delay_ms(50);
  	
  	check_dip_switches();
  	check_buttons();

code/src/uart.c

@@ -1,87 +1,45 @@
 #include <avr/io.h>
 #include "uart.h"
 
+static int uart_putchar(char c, FILE *stream);
 
+FILE uart_output = FDEV_SETUP_STREAM(uart_putchar, NULL, _FDEV_SETUP_WRITE);
 
-void USART_Init(unsigned int ubrr) 
+void uart_init ()
 {
-  /*Set baud rate */
+    UBRRH = (BAUDRATE>>8);                      // shift the register right by 8 bits
-  UBRR0H = ubrr>>8; 
+    UBRRL = BAUDRATE;                           // set baud rate
-  UBRR0L = ubrr;
+    UCSRB|= (1<<TXEN)|(1<<RXEN)|(1<<RXCIE);                // enable receiver and transmitter
-  /*Enable receiver and transmitter */ 
+    UCSRC|= (1<<URSEL)|(1<<UCSZ0)|(1<<UCSZ1);   // 8bit data format
-  UCSR0B = (1<<TXEN0);
-		 //| (1<<RXEN0)
-		 //|(1<<RXCIE0);
-  /* Set frame format: 8data, 1 stop bit */ 
-  UCSR0C = (1<<UCSZ00) | (1 << UCSZ01);
-}
 
-void USART_Transmit(unsigned char data ) 
+    stdout = &uart_output;
-{
-  /* Wait for empty transmit buffer */ 
-  while ( !( UCSR0A & (1<<UDRE0)) )
-    ;
-  /* Put data into buffer, sends the data */ 
-  UDR0 = data;
 }
 
-void uart_puts(char * str) {
+static int uart_putchar(char c, FILE *stream) {
-    while (*str) {
+    if (c == '\n') {
-        putchar(*str++);
+        uart_putchar('\r', stream);
     }
-}
+    loop_until_bit_is_set(UCSRA, UDRE);
-
+    UDR = c;
-
-int putchar(int c){
-  USART_Transmit((char) c);
-  //while ( !( UCSR0A & (1<<UDRE0)) )
-  //UDR0 = c;
     return 0;
 }
 
-/*
+void read_sync(char buffer[], uint8_t buffersize, uint8_t * bufferindex){
-void search_i2c_devices(){
+    for(int i=0; i < buffersize; i++){
-  char error, address;
+        buffer[i]=0;
-  int nDevices;
-
-  uart_puts("Scanning...");
-
-
-  nDevices = 0;
-  for (address = 1; address < 127; address++ )
-  {
-	uart_puts("\n");
-    uart_puts("Scanning...");
-    // The i2c_scanner uses the return value of
-    // the Write.endTransmisstion to see if
-    // a device did acknowledge to the address.
-    i2c_start_wait(address);
-    error = i2c_readNak();
-
-    if (error == 0)
-    {
-      uart_puts("I2C device found at address 0x");
-      if (address < 16)
-       uart_puts("0");
-      uart_puts(address);
-      uart_puts("  !");
-
-      nDevices++;
     }
-    else if (error == 4)
+    *bufferindex=0;
-    {
-      uart_puts("Unknown error at address 0x");
-      if (address < 16)
-       uart_puts("0");
-       uart_puts(address);
-    }
-  }
-  if (nDevices == 0)
-    uart_puts("No I2C devices found\n");
-  else
-    uart_puts("done\n");
 
-//  delay();           // wait 5 seconds for next scan
+    char input;
+    do{
+        while ((UCSRA & (1 << RXC)) == 0);
+        input = UDR;
 
+        putchar(input); //echo
+        buffer[*bufferindex]=input;
+        *bufferindex=*bufferindex+1;
+    }while(!(input == '\n' || input == '\r'));
+    buffer[*bufferindex]=0;
+    putchar('\n');
 }
-*/
+