You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
543 lines
21 KiB
C
543 lines
21 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32g0xx_hal_pwr.c
|
|
* @author MCD Application Team
|
|
* @brief PWR HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Power Controller (PWR) peripheral:
|
|
* + Initialization/de-initialization functions
|
|
* + Peripheral Control functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2018 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32g0xx_hal.h"
|
|
|
|
/** @addtogroup STM32G0xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_PWR_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup PWR_Private_Defines PWR Private Defines
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and de-initialization functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..]
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitialize the HAL PWR peripheral registers to their default reset
|
|
values.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DeInit(void)
|
|
{
|
|
__HAL_RCC_PWR_FORCE_RESET();
|
|
__HAL_RCC_PWR_RELEASE_RESET();
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
|
* @brief Low Power modes configuration functions
|
|
*
|
|
@verbatim
|
|
|
|
===============================================================================
|
|
##### Peripheral Control functions #####
|
|
===============================================================================
|
|
|
|
[..]
|
|
*** WakeUp pin configuration ***
|
|
================================
|
|
[..]
|
|
(+) WakeUp pins are used to wakeup the system from Standby mode or
|
|
Shutdown mode. WakeUp pins polarity can be set to configure event
|
|
detection on high level (rising edge) or low level (falling edge).
|
|
|
|
*** Low Power mode configuration ***
|
|
=====================================
|
|
[..]
|
|
The devices feature 7 low-power modes:
|
|
(+) Low-power run mode: core and peripherals are running at low frequency.
|
|
Regulator is in low power mode.
|
|
(+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running,
|
|
regulator is main mode.
|
|
(+) Low-power Sleep mode: Cortex-M0+ core stopped, peripherals kept running
|
|
and regulator in low power mode.
|
|
(+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is
|
|
main mode.
|
|
(+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator
|
|
off, low power regulator on.
|
|
(+) Standby mode: all clocks are stopped except LSI and LSE, regulator is
|
|
disable.
|
|
(+) Shutdown mode: all clocks are stopped except LSE, regulator is
|
|
disable.
|
|
|
|
*** Low-power run mode ***
|
|
==========================
|
|
[..]
|
|
(+) Entry: (from main run mode)
|
|
(++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after
|
|
having decreased the system clock below 2 MHz.
|
|
(+) Exit:
|
|
(++) clear LPR bit then wait for REGLPF bit to be reset with
|
|
HAL_PWREx_DisableLowPowerRunMode() API. Only then can the
|
|
system clock frequency be increased above 2 MHz.
|
|
|
|
*** Sleep mode / Low-power sleep mode ***
|
|
=========================================
|
|
[..]
|
|
(+) Entry:
|
|
The Sleep & Low-power Sleep modes are entered through
|
|
HAL_PWR_EnterSLEEPMode() API specifying whether or not the regulator
|
|
is forced to low-power mode and if exit is interrupt or event
|
|
triggered.
|
|
(++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode).
|
|
(++) PWR_LOWPOWERREGULATOR_ON: Low-power Sleep mode (regulator in low
|
|
power mode). In this case, the system clock frequency must have
|
|
been decreased below 2 MHz beforehand.
|
|
(++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction
|
|
(++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction
|
|
(+) WFI Exit:
|
|
(++) Any interrupt enabled in nested vectored interrupt controller (NVIC)
|
|
(+) WFE Exit:
|
|
(++) Any wakeup event if cortex is configured with SEVONPEND = 0
|
|
(++) Interrupt even when disabled in NVIC if cortex is configured with
|
|
SEVONPEND = 1
|
|
[..] When exiting the Low-power Sleep mode by issuing an interrupt or a wakeup event,
|
|
the MCU is in Low-power Run mode.
|
|
|
|
*** Stop 0 & Stop 1 modes ***
|
|
=============================
|
|
[..]
|
|
(+) Entry:
|
|
The Stop modes are entered through the following APIs:
|
|
(++) HAL_PWR_EnterSTOPMode() with following settings:
|
|
(+++) PWR_MAINREGULATOR_ON to enter STOP0 mode.
|
|
(+++) PWR_LOWPOWERREGULATOR_ON to enter STOP1 mode.
|
|
(+) Exit (interrupt or event-triggered, specified when entering STOP mode):
|
|
(++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction
|
|
(++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction
|
|
(+) WFI Exit:
|
|
(++) Any EXTI line (internal or external) configured in interrupt mode
|
|
with corresponding interrupt enable in NVIC
|
|
(+) WFE Exit:
|
|
(++) Any EXTI line (internal or external) configured in event mode if
|
|
cortex is configured with SEVONPEND = 0
|
|
(++) Any EXTI line configured in interrupt mode (even if the
|
|
corresponding EXTI Interrupt vector is disabled in the NVIC) if
|
|
cortex is configured with SEVONPEND = 0. The interrupt source can
|
|
be external interrupts or peripherals with wakeup capability.
|
|
[..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode
|
|
depending on the LPR bit setting.
|
|
|
|
*** Standby mode ***
|
|
====================
|
|
[..] In Standby mode, it is possible to keep backup SRAM content (defined as
|
|
full SRAM) keeping low power regulator on. This is achievable by setting
|
|
Ram retention bit calling HAL_PWREx_EnableSRAMRetention API. This increases
|
|
power consumption.
|
|
Its also possible to define I/O states using APIs:
|
|
HAL_PWREx_EnableGPIOPullUp, HAL_PWREx_EnableGPIOPullDown &
|
|
HAL_PWREx_EnablePullUpPullDownConfig
|
|
(+) Entry:
|
|
(++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by
|
|
setting SLEEPDEEP in Cortex control register.
|
|
(+) Exit:
|
|
(++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp),
|
|
tamper event (internal & external), LSE CSS detection, reset on
|
|
NRST pin, IWDG reset & BOR reset.
|
|
[..] Exiting Standby generates a power reset: Cortex is reset and execute
|
|
Reset handler vector, all registers in the Vcore domain are set to
|
|
their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG,
|
|
and Standby/Shutdown modes control) are not impacted.
|
|
|
|
*** Shutdown mode ***
|
|
======================
|
|
[..]
|
|
In Shutdown mode,
|
|
voltage regulator is disabled, all clocks are off except LSE, RRS bit is
|
|
cleared. SRAM and registers contents are lost except for backup domain
|
|
registers.
|
|
(+) Entry:
|
|
(++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API,
|
|
by setting SLEEPDEEP in Cortex control register.
|
|
(+) Exit:
|
|
(++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp),
|
|
tamper event (internal & external), LSE CSS detection, reset on
|
|
NRST pin.
|
|
[..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute
|
|
Reset handler vector, all registers are set to their reset value but ones
|
|
in backup domain.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable access to the backup domain
|
|
* (RTC & TAMP registers, backup registers, RCC BDCR register).
|
|
* @note After reset, the backup domain is protected against
|
|
* possible unwanted write accesses. All RTC & TAMP registers (backup
|
|
* registers included) and RCC BDCR register are concerned.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableBkUpAccess(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_DBP);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disable access to the backup domain
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableBkUpAccess(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable the WakeUp PINx functionality.
|
|
* @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
|
|
* This parameter can be one of the following legacy values which set
|
|
* the default polarity i.e. detection on high level (rising edge):
|
|
* @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*),
|
|
* PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6
|
|
* or one of the following value where the user can explicitly specify
|
|
* the enabled pin and the chosen polarity:
|
|
* @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
|
|
* @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
|
|
* @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW (*)
|
|
* @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
|
|
* @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW (*)
|
|
* @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
|
|
* @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
|
|
* @note (*) availability depends on devices
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
|
|
{
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
|
|
|
|
/* Specifies the Wake-Up pin polarity for the event detection
|
|
(rising or falling edge) */
|
|
MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT));
|
|
|
|
/* Enable wake-up pin */
|
|
SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disable the WakeUp PINx functionality.
|
|
* @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2,PWR_WAKEUP_PIN3(*),
|
|
* PWR_WAKEUP_PIN4,PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6
|
|
* @note (*) availability depends on devices
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
|
|
{
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
|
|
|
CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enter Sleep or Low-power Sleep mode.
|
|
* @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as
|
|
* in Run mode.
|
|
* @param Regulator Specifies the regulator state in Sleep/Low-power Sleep
|
|
* mode. This parameter can be one of the following values:
|
|
* @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode)
|
|
* @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator
|
|
* in low-power mode)
|
|
* @note Low-power Sleep mode is entered from Low-power Run mode only. In
|
|
* case Regulator parameter is set to Low Power but MCU is in Run mode,
|
|
* we will first enter in Low-power Run mode. Therefore, user should
|
|
* take care that HCLK frequency is less than 2 MHz.
|
|
* @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode.
|
|
* To switch back to Run mode, user must call
|
|
* HAL_PWREx_DisableLowPowerRunMode() API.
|
|
* @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE
|
|
* instruction. This parameter can be one of the following values:
|
|
* @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep
|
|
* mode with WFI instruction
|
|
* @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep
|
|
* mode with WFE instruction
|
|
* @note When WFI entry is used, tick interrupt have to be disabled if not
|
|
* desired as the interrupt wake up source.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_REGULATOR(Regulator));
|
|
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
|
|
|
|
/* Set Regulator parameter */
|
|
if (Regulator != PWR_MAINREGULATOR_ON)
|
|
{
|
|
/* If in run mode, first move to low-power run mode.
|
|
The system clock frequency must be below 2 MHz at this point. */
|
|
if ((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u)
|
|
{
|
|
HAL_PWREx_EnableLowPowerRunMode();
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* If in low-power run mode at this point, exit it */
|
|
if ((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u)
|
|
{
|
|
if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK)
|
|
{
|
|
return ;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* Select SLEEP mode entry -------------------------------------------------*/
|
|
if (SLEEPEntry == PWR_SLEEPENTRY_WFI)
|
|
{
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
else
|
|
{
|
|
/* Request Wait For Event */
|
|
__SEV();
|
|
__WFE();
|
|
__WFE();
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enter Stop mode
|
|
* @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with
|
|
* legacy code running on devices where only "Stop mode" is mentioned
|
|
* with main or low power regulator ON.
|
|
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
|
* @note All clocks in the VCORE domain are stopped; the PLL, the HSI and the
|
|
* HSE oscillators are disabled. Some peripherals with the wakeup
|
|
* capability can switch on the HSI to receive a frame, and switch off
|
|
* the HSI after receiving the frame if it is not a wakeup frame.
|
|
* SRAM and register contents are preserved.
|
|
* The BOR is available.
|
|
* The voltage regulator can be configured either in normal (Stop 0) or
|
|
* low-power mode (Stop 1).
|
|
* @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a
|
|
* wakeup event, the HSI RC oscillator is selected as system clock
|
|
* @note When the voltage regulator operates in low power mode (Stop 1),
|
|
* an additional startup delay is incurred when waking up. By keeping
|
|
* the internal regulator ON during Stop mode (Stop 0), the consumption
|
|
* is higher although the startup time is reduced.
|
|
* @param Regulator Specifies the regulator state in Stop mode
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON)
|
|
* @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power
|
|
* regulator ON)
|
|
* @param STOPEntry Specifies Stop 0 or Stop 1 mode is entered with WFI or
|
|
* WFE instruction. This parameter can be one of the following values:
|
|
* @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI
|
|
* instruction.
|
|
* @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE
|
|
* instruction.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_PWR_REGULATOR(Regulator));
|
|
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
|
|
|
if (Regulator != PWR_MAINREGULATOR_ON)
|
|
{
|
|
/* Stop mode with Low-Power Regulator */
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP1);
|
|
}
|
|
else
|
|
{
|
|
/* Stop mode with Main Regulator */
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0);
|
|
}
|
|
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* Select Stop mode entry --------------------------------------------------*/
|
|
if (STOPEntry == PWR_STOPENTRY_WFI)
|
|
{
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
else
|
|
{
|
|
/* Request Wait For Event */
|
|
__SEV();
|
|
__WFE();
|
|
__WFE();
|
|
}
|
|
|
|
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enter Standby mode.
|
|
* @note In Standby mode, the PLL, the HSI and the HSE oscillators are
|
|
* switched off. The voltage regulator is disabled. SRAM and register
|
|
* contents are lost except for registers in the Backup domain and
|
|
* Standby circuitry. BOR is available.
|
|
* @note The I/Os can be configured either with a pull-up or pull-down or can
|
|
* be kept in analog state.
|
|
* HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown()
|
|
* respectively enable Pull Up and PullDown state.
|
|
* HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown()
|
|
* disable the same. These states are effective in Standby mode only if
|
|
* APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API.
|
|
* @note Sram content can be kept setting RRS through HAL_PWREx_EnableSRAMRetention()
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnterSTANDBYMode(void)
|
|
{
|
|
/* Set Stand-by mode */
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY);
|
|
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
|
|
|
/* This option is used to ensure that store operations are completed */
|
|
#if defined ( __CC_ARM)
|
|
__force_stores();
|
|
#endif /* __CC_ARM */
|
|
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enable Sleep-On-Exit Cortex feature
|
|
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the
|
|
* processor enters SLEEP or DEEPSLEEP mode when an interruption
|
|
* handling is over returning to thread mode. Setting this bit is
|
|
* useful when the processor is expected to run only on interruptions
|
|
* handling.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableSleepOnExit(void)
|
|
{
|
|
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disable Sleep-On-Exit Cortex feature
|
|
* @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the
|
|
* processor enters SLEEP or DEEPSLEEP mode when an interruption
|
|
* handling is over.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableSleepOnExit(void)
|
|
{
|
|
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enable Cortex Sev On Pending feature.
|
|
* @note Set SEVONPEND bit of SCR register. When this bit is set, enabled
|
|
* events and all interrupts, including disabled ones can wakeup
|
|
* processor from WFE.
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_EnableSEVOnPend(void)
|
|
{
|
|
/* Set SEVONPEND bit of Cortex System Control Register */
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Disable Cortex Sev On Pending feature.
|
|
* @note Clear SEVONPEND bit of SCR register. When this bit is clear, only
|
|
* enable interrupts or events can wakeup processor from WFE
|
|
* @retval None
|
|
*/
|
|
void HAL_PWR_DisableSEVOnPend(void)
|
|
{
|
|
/* Clear SEVONPEND bit of Cortex System Control Register */
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|