Filamentstr/05_wickler
Archived
1
0
Fork 0
Code Issues 3 Pull Requests Releases Wiki Activity

Add [14_m1284p_WIZNET_FTPC_FATFS_v1.2] prj

Browse Source
This commit is contained in:
maxxir_w
2019-01-18 15:21:24 +04:00
parent 6baed19df8
commit d8d905adc3
25 changed files with 15197 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

267
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/W5500/w5500.c Normal file
View File

@@ -0,0 +1,267 @@
//*****************************************************************************
//
//! \file w5500.c
//! \brief W5500 HAL Interface.
//! \version 1.0.2
//! \date 2013/10/21
//! \par Revision history
//! <2015/02/05> Notice
//! The version history is not updated after this point.
//! Download the latest version directly from GitHub. Please visit the our GitHub repository for ioLibrary.
//! >> https://github.com/Wiznet/ioLibrary_Driver
//! <2014/05/01> V1.0.2
//! 1. Implicit type casting -> Explicit type casting. Refer to M20140501
//! Fixed the problem on porting into under 32bit MCU
//! Issued by Mathias ClauBen, wizwiki forum ID Think01 and bobh
//! Thank for your interesting and serious advices.
//! <2013/12/20> V1.0.1
//! 1. Remove warning
//! 2. WIZCHIP_READ_BUF WIZCHIP_WRITE_BUF in case _WIZCHIP_IO_MODE_SPI_FDM_
//! for loop optimized(removed). refer to M20131220
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
//#include <stdio.h>
#include "w5500.h"
#define _W5500_SPI_VDM_OP_ 0x00
#define _W5500_SPI_FDM_OP_LEN1_ 0x01
#define _W5500_SPI_FDM_OP_LEN2_ 0x02
#define _W5500_SPI_FDM_OP_LEN4_ 0x03
#if (_WIZCHIP_ == 5500)
////////////////////////////////////////////////////
uint8_t WIZCHIP_READ(uint32_t AddrSel)
{
uint8_t ret;
uint8_t spi_data[3];
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_READ_ | _W5500_SPI_VDM_OP_);
if(!WIZCHIP.IF.SPI._read_burst || !WIZCHIP.IF.SPI._write_burst) // byte operation
{
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
}
else // burst operation
{
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
WIZCHIP.IF.SPI._write_burst(spi_data, 3);
}
ret = WIZCHIP.IF.SPI._read_byte();
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
return ret;
}
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb )
{
uint8_t spi_data[4];
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_WRITE_ | _W5500_SPI_VDM_OP_);
//if(!WIZCHIP.IF.SPI._read_burst || !WIZCHIP.IF.SPI._write_burst) // byte operation
if(!WIZCHIP.IF.SPI._write_burst) // byte operation
{
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
WIZCHIP.IF.SPI._write_byte(wb);
}
else // burst operation
{
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
spi_data[3] = wb;
WIZCHIP.IF.SPI._write_burst(spi_data, 4);
}
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_READ_BUF (uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
{
uint8_t spi_data[3];
uint16_t i;
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_READ_ | _W5500_SPI_VDM_OP_);
if(!WIZCHIP.IF.SPI._read_burst || !WIZCHIP.IF.SPI._write_burst) // byte operation
{
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
for(i = 0; i < len; i++)
pBuf[i] = WIZCHIP.IF.SPI._read_byte();
}
else // burst operation
{
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
WIZCHIP.IF.SPI._write_burst(spi_data, 3);
WIZCHIP.IF.SPI._read_burst(pBuf, len);
}
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
{
uint8_t spi_data[3];
uint16_t i;
WIZCHIP_CRITICAL_ENTER();
WIZCHIP.CS._select();
AddrSel |= (_W5500_SPI_WRITE_ | _W5500_SPI_VDM_OP_);
if(!WIZCHIP.IF.SPI._write_burst) // byte operation
{
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF0000) >> 16);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x0000FF00) >> 8);
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x000000FF) >> 0);
for(i = 0; i < len; i++)
WIZCHIP.IF.SPI._write_byte(pBuf[i]);
}
else // burst operation
{
spi_data[0] = (AddrSel & 0x00FF0000) >> 16;
spi_data[1] = (AddrSel & 0x0000FF00) >> 8;
spi_data[2] = (AddrSel & 0x000000FF) >> 0;
WIZCHIP.IF.SPI._write_burst(spi_data, 3);
WIZCHIP.IF.SPI._write_burst(pBuf, len);
}
WIZCHIP.CS._deselect();
WIZCHIP_CRITICAL_EXIT();
}
uint16_t getSn_TX_FSR(uint8_t sn)
{
uint16_t val=0,val1=0;
do
{
val1 = WIZCHIP_READ(Sn_TX_FSR(sn));
val1 = (val1 << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_TX_FSR(sn),1));
if (val1 != 0)
{
val = WIZCHIP_READ(Sn_TX_FSR(sn));
val = (val << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_TX_FSR(sn),1));
}
}while (val != val1);
return val;
}
uint16_t getSn_RX_RSR(uint8_t sn)
{
uint16_t val=0,val1=0;
do
{
val1 = WIZCHIP_READ(Sn_RX_RSR(sn));
val1 = (val1 << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_RX_RSR(sn),1));
if (val1 != 0)
{
val = WIZCHIP_READ(Sn_RX_RSR(sn));
val = (val << 8) + WIZCHIP_READ(WIZCHIP_OFFSET_INC(Sn_RX_RSR(sn),1));
}
}while (val != val1);
return val;
}
void wiz_send_data(uint8_t sn, uint8_t *wizdata, uint16_t len)
{
uint16_t ptr = 0;
uint32_t addrsel = 0;
if(len == 0) return;
ptr = getSn_TX_WR(sn);
//M20140501 : implict type casting -> explict type casting
//addrsel = (ptr << 8) + (WIZCHIP_TXBUF_BLOCK(sn) << 3);
addrsel = ((uint32_t)ptr << 8) + (WIZCHIP_TXBUF_BLOCK(sn) << 3);
//
WIZCHIP_WRITE_BUF(addrsel,wizdata, len);
ptr += len;
setSn_TX_WR(sn,ptr);
}
void wiz_recv_data(uint8_t sn, uint8_t *wizdata, uint16_t len)
{
uint16_t ptr = 0;
uint32_t addrsel = 0;
if(len == 0) return;
ptr = getSn_RX_RD(sn);
//M20140501 : implict type casting -> explict type casting
//addrsel = ((ptr << 8) + (WIZCHIP_RXBUF_BLOCK(sn) << 3);
addrsel = ((uint32_t)ptr << 8) + (WIZCHIP_RXBUF_BLOCK(sn) << 3);
//
WIZCHIP_READ_BUF(addrsel, wizdata, len);
ptr += len;
setSn_RX_RD(sn,ptr);
}
void wiz_recv_ignore(uint8_t sn, uint16_t len)
{
uint16_t ptr = 0;
ptr = getSn_RX_RD(sn);
ptr += len;
setSn_RX_RD(sn,ptr);
}
#endif

2163
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/W5500/w5500.h Normal file
View File

File diff suppressed because it is too large Load Diff

930
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/socket.c Normal file
View File

@@ -0,0 +1,930 @@
//*****************************************************************************
//
//! \file socket.c
//! \brief SOCKET APIs Implements file.
//! \details SOCKET APIs like as Berkeley Socket APIs.
//! \version 1.0.3
//! \date 2013/10/21
//! \par Revision history
//! <2015/02/05> Notice
//! The version history is not updated after this point.
//! Download the latest version directly from GitHub. Please visit the our GitHub repository for ioLibrary.
//! >> https://github.com/Wiznet/ioLibrary_Driver
//! <2014/05/01> V1.0.3. Refer to M20140501
//! 1. Implicit type casting -> Explicit type casting.
//! 2. replace 0x01 with PACK_REMAINED in recvfrom()
//! 3. Validation a destination ip in connect() & sendto():
//! It occurs a fatal error on converting unint32 address if uint8* addr parameter is not aligned by 4byte address.
//! Copy 4 byte addr value into temporary uint32 variable and then compares it.
//! <2013/12/20> V1.0.2 Refer to M20131220
//! Remove Warning.
//! <2013/11/04> V1.0.1 2nd Release. Refer to "20131104".
//! In sendto(), Add to clear timeout interrupt status (Sn_IR_TIMEOUT)
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#include "socket.h"
//M20150401 : Typing Error
//#define SOCK_ANY_PORT_NUM 0xC000;
#define SOCK_ANY_PORT_NUM 0xC000
static uint16_t sock_any_port = SOCK_ANY_PORT_NUM;
static uint16_t sock_io_mode = 0;
static uint16_t sock_is_sending = 0;
static uint16_t sock_remained_size[_WIZCHIP_SOCK_NUM_] = {0,0,};
//M20150601 : For extern decleation
//static uint8_t sock_pack_info[_WIZCHIP_SOCK_NUM_] = {0,};
uint8_t sock_pack_info[_WIZCHIP_SOCK_NUM_] = {0,};
//
#if _WIZCHIP_ == 5200
static uint16_t sock_next_rd[_WIZCHIP_SOCK_NUM_] ={0,};
#endif
//A20150601 : For integrating with W5300
#if _WIZCHIP_ == 5300
uint8_t sock_remained_byte[_WIZCHIP_SOCK_NUM_] = {0,}; // set by wiz_recv_data()
#endif
#define CHECK_SOCKNUM() \
do{ \
if(sn > _WIZCHIP_SOCK_NUM_) return SOCKERR_SOCKNUM; \
}while(0); \
#define CHECK_SOCKMODE(mode) \
do{ \
if((getSn_MR(sn) & 0x0F) != mode) return SOCKERR_SOCKMODE; \
}while(0); \
#define CHECK_SOCKINIT() \
do{ \
if((getSn_SR(sn) != SOCK_INIT)) return SOCKERR_SOCKINIT; \
}while(0); \
#define CHECK_SOCKDATA() \
do{ \
if(len == 0) return SOCKERR_DATALEN; \
}while(0); \
int8_t socket(uint8_t sn, uint8_t protocol, uint16_t port, uint8_t flag)
{
CHECK_SOCKNUM();
switch(protocol)
{
case Sn_MR_TCP :
{
//M20150601 : Fixed the warning - taddr will never be NULL
/*
uint8_t taddr[4];
getSIPR(taddr);
*/
uint32_t taddr;
getSIPR((uint8_t*)&taddr);
if(taddr == 0) return SOCKERR_SOCKINIT;
}
case Sn_MR_UDP :
case Sn_MR_MACRAW :
case Sn_MR_IPRAW :
break;
#if ( _WIZCHIP_ < 5200 )
case Sn_MR_PPPoE :
break;
#endif
default :
return SOCKERR_SOCKMODE;
}
//M20150601 : For SF_TCP_ALIGN & W5300
//if((flag & 0x06) != 0) return SOCKERR_SOCKFLAG;
if((flag & 0x04) != 0) return SOCKERR_SOCKFLAG;
#if _WIZCHIP_ == 5200
if(flag & 0x10) return SOCKERR_SOCKFLAG;
#endif
if(flag != 0)
{
switch(protocol)
{
case Sn_MR_TCP:
//M20150601 : For SF_TCP_ALIGN & W5300
#if _WIZCHIP_ == 5300
if((flag & (SF_TCP_NODELAY|SF_IO_NONBLOCK|SF_TCP_ALIGN))==0) return SOCKERR_SOCKFLAG;
#else
if((flag & (SF_TCP_NODELAY|SF_IO_NONBLOCK))==0) return SOCKERR_SOCKFLAG;
#endif
break;
case Sn_MR_UDP:
if(flag & SF_IGMP_VER2)
{
if((flag & SF_MULTI_ENABLE)==0) return SOCKERR_SOCKFLAG;
}
#if _WIZCHIP_ == 5500
if(flag & SF_UNI_BLOCK)
{
if((flag & SF_MULTI_ENABLE) == 0) return SOCKERR_SOCKFLAG;
}
#endif
break;
default:
break;
}
}
close(sn);
//M20150601
#if _WIZCHIP_ == 5300
setSn_MR(sn, ((uint16_t)(protocol | (flag & 0xF0))) | (((uint16_t)(flag & 0x02)) << 7) );
#else
setSn_MR(sn, (protocol | (flag & 0xF0)));
#endif
if(!port)
{
port = sock_any_port++;
if(sock_any_port == 0xFFF0) sock_any_port = SOCK_ANY_PORT_NUM;
}
setSn_PORT(sn,port);
setSn_CR(sn,Sn_CR_OPEN);
while(getSn_CR(sn));
//A20150401 : For release the previous sock_io_mode
sock_io_mode &= ~(1 <<sn);
//
sock_io_mode |= ((flag & SF_IO_NONBLOCK) << sn);
sock_is_sending &= ~(1<<sn);
sock_remained_size[sn] = 0;
//M20150601 : repalce 0 with PACK_COMPLETED
//sock_pack_info[sn] = 0;
sock_pack_info[sn] = PACK_COMPLETED;
//
while(getSn_SR(sn) == SOCK_CLOSED);
return (int8_t)sn;
}
int8_t close(uint8_t sn)
{
CHECK_SOCKNUM();
//A20160426 : Applied the erratum 1 of W5300
#if (_WIZCHIP_ == 5300)
//M20160503 : Wrong socket parameter. s -> sn
//if( ((getSn_MR(s)& 0x0F) == Sn_MR_TCP) && (getSn_TX_FSR(s) != getSn_TxMAX(s)) )
if( ((getSn_MR(sn)& 0x0F) == Sn_MR_TCP) && (getSn_TX_FSR(sn) != getSn_TxMAX(sn)) )
{
uint8_t destip[4] = {0, 0, 0, 1};
// TODO
// You can wait for completing to sending data;
// wait about 1 second;
// if you have completed to send data, skip the code of erratum 1
// ex> wait_1s();
// if (getSn_TX_FSR(s) == getSn_TxMAX(s)) continue;
//
//M20160503 : The socket() of close() calls close() itself again. It occures a infinite loop - close()->socket()->close()->socket()-> ~
//socket(s,Sn_MR_UDP,0x3000,0);
//sendto(s,destip,1,destip,0x3000); // send the dummy data to an unknown destination(0.0.0.1).
setSn_MR(sn,Sn_MR_UDP);
setSn_PORTR(sn, 0x3000);
setSn_CR(sn,Sn_CR_OPEN);
while(getSn_CR(sn) != 0);
while(getSn_SR(sn) != SOCK_UDP);
sendto(sn,destip,1,destip,0x3000); // send the dummy data to an unknown destination(0.0.0.1).
};
#endif
setSn_CR(sn,Sn_CR_CLOSE);
/* wait to process the command... */
while( getSn_CR(sn) );
/* clear all interrupt of the socket. */
setSn_IR(sn, 0xFF);
//A20150401 : Release the sock_io_mode of socket n.
sock_io_mode &= ~(1<<sn);
//
sock_is_sending &= ~(1<<sn);
sock_remained_size[sn] = 0;
sock_pack_info[sn] = 0;
while(getSn_SR(sn) != SOCK_CLOSED);
return SOCK_OK;
}
int8_t listen(uint8_t sn)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKINIT();
setSn_CR(sn,Sn_CR_LISTEN);
while(getSn_CR(sn));
while(getSn_SR(sn) != SOCK_LISTEN)
{
close(sn);
return SOCKERR_SOCKCLOSED;
}
return SOCK_OK;
}
int8_t connect(uint8_t sn, uint8_t * addr, uint16_t port)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKINIT();
//M20140501 : For avoiding fatal error on memory align mismatched
//if( *((uint32_t*)addr) == 0xFFFFFFFF || *((uint32_t*)addr) == 0) return SOCKERR_IPINVALID;
{
uint32_t taddr;
taddr = ((uint32_t)addr[0] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[1] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[2] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[3] & 0x000000FF);
if( taddr == 0xFFFFFFFF || taddr == 0) return SOCKERR_IPINVALID;
}
//
if(port == 0) return SOCKERR_PORTZERO;
setSn_DIPR(sn,addr);
setSn_DPORT(sn,port);
setSn_CR(sn,Sn_CR_CONNECT);
while(getSn_CR(sn));
if(sock_io_mode & (1<<sn)) return SOCK_BUSY;
while(getSn_SR(sn) != SOCK_ESTABLISHED)
{
if (getSn_IR(sn) & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
return SOCKERR_TIMEOUT;
}
if (getSn_SR(sn) == SOCK_CLOSED)
{
return SOCKERR_SOCKCLOSED;
}
}
return SOCK_OK;
}
int8_t disconnect(uint8_t sn)
{
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
setSn_CR(sn,Sn_CR_DISCON);
/* wait to process the command... */
while(getSn_CR(sn));
sock_is_sending &= ~(1<<sn);
if(sock_io_mode & (1<<sn)) return SOCK_BUSY;
while(getSn_SR(sn) != SOCK_CLOSED)
{
if(getSn_IR(sn) & Sn_IR_TIMEOUT)
{
close(sn);
return SOCKERR_TIMEOUT;
}
}
return SOCK_OK;
}
int32_t send(uint8_t sn, uint8_t * buf, uint16_t len)
{
uint8_t tmp=0;
uint16_t freesize=0;
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKDATA();
tmp = getSn_SR(sn);
if(tmp != SOCK_ESTABLISHED && tmp != SOCK_CLOSE_WAIT) return SOCKERR_SOCKSTATUS;
if( sock_is_sending & (1<<sn) )
{
tmp = getSn_IR(sn);
if(tmp & Sn_IR_SENDOK)
{
setSn_IR(sn, Sn_IR_SENDOK);
//M20150401 : Typing Error
//#if _WZICHIP_ == 5200
#if _WIZCHIP_ == 5200
if(getSn_TX_RD(sn) != sock_next_rd[sn])
{
setSn_CR(sn,Sn_CR_SEND);
while(getSn_CR(sn));
return SOCK_BUSY;
}
#endif
sock_is_sending &= ~(1<<sn);
}
else if(tmp & Sn_IR_TIMEOUT)
{
close(sn);
return SOCKERR_TIMEOUT;
}
else return SOCK_BUSY;
}
freesize = getSn_TxMAX(sn);
if (len > freesize) len = freesize; // check size not to exceed MAX size.
while(1)
{
freesize = getSn_TX_FSR(sn);
tmp = getSn_SR(sn);
if ((tmp != SOCK_ESTABLISHED) && (tmp != SOCK_CLOSE_WAIT))
{
close(sn);
return SOCKERR_SOCKSTATUS;
}
if( (sock_io_mode & (1<<sn)) && (len > freesize) ) return SOCK_BUSY;
if(len <= freesize) break;
}
wiz_send_data(sn, buf, len);
#if _WIZCHIP_ == 5200
sock_next_rd[sn] = getSn_TX_RD(sn) + len;
#endif
#if _WIZCHIP_ == 5300
setSn_TX_WRSR(sn,len);
#endif
setSn_CR(sn,Sn_CR_SEND);
/* wait to process the command... */
while(getSn_CR(sn));
sock_is_sending |= (1 << sn);
//M20150409 : Explicit Type Casting
//return len;
return (int32_t)len;
}
int32_t recv(uint8_t sn, uint8_t * buf, uint16_t len)
{
uint8_t tmp = 0;
uint16_t recvsize = 0;
//A20150601 : For integarating with W5300
#if _WIZCHIP_ == 5300
uint8_t head[2];
uint16_t mr;
#endif
//
CHECK_SOCKNUM();
CHECK_SOCKMODE(Sn_MR_TCP);
CHECK_SOCKDATA();
recvsize = getSn_RxMAX(sn);
if(recvsize < len) len = recvsize;
//A20150601 : For Integrating with W5300
#if _WIZCHIP_ == 5300
//sock_pack_info[sn] = PACK_COMPLETED; // for clear
if(sock_remained_size[sn] == 0)
{
#endif
//
while(1)
{
recvsize = getSn_RX_RSR(sn);
tmp = getSn_SR(sn);
if (tmp != SOCK_ESTABLISHED)
{
if(tmp == SOCK_CLOSE_WAIT)
{
if(recvsize != 0) break;
else if(getSn_TX_FSR(sn) == getSn_TxMAX(sn))
{
close(sn);
return SOCKERR_SOCKSTATUS;
}
}
else
{
close(sn);
return SOCKERR_SOCKSTATUS;
}
}
if((sock_io_mode & (1<<sn)) && (recvsize == 0)) return SOCK_BUSY;
if(recvsize != 0) break;
};
#if _WIZCHIP_ == 5300
}
#endif
//A20150601 : For integrating with W5300
#if _WIZCHIP_ == 5300
if((sock_remained_size[sn] == 0) || (getSn_MR(sn) & Sn_MR_ALIGN))
{
mr = getMR();
if((getSn_MR(sn) & Sn_MR_ALIGN)==0)
{
wiz_recv_data(sn,head,2);
if(mr & MR_FS)
recvsize = (((uint16_t)head[1]) << 8) | ((uint16_t)head[0]);
else
recvsize = (((uint16_t)head[0]) << 8) | ((uint16_t)head[1]);
sock_pack_info[sn] = PACK_FIRST;
}
sock_remained_size[sn] = recvsize;
}
if(len > sock_remained_size[sn]) len = sock_remained_size[sn];
recvsize = len;
if(sock_pack_info[sn] & PACK_FIFOBYTE)
{
*buf = sock_remained_byte[sn];
buf++;
sock_pack_info[sn] &= ~(PACK_FIFOBYTE);
recvsize -= 1;
sock_remained_size[sn] -= 1;
}
if(recvsize != 0)
{
wiz_recv_data(sn, buf, recvsize);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
}
sock_remained_size[sn] -= recvsize;
if(sock_remained_size[sn] != 0)
{
sock_pack_info[sn] |= PACK_REMAINED;
if(recvsize & 0x1) sock_pack_info[sn] |= PACK_FIFOBYTE;
}
else sock_pack_info[sn] = PACK_COMPLETED;
if(getSn_MR(sn) & Sn_MR_ALIGN) sock_remained_size[sn] = 0;
//len = recvsize;
#else
if(recvsize < len) len = recvsize;
wiz_recv_data(sn, buf, len);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
#endif
//M20150409 : Explicit Type Casting
//return len;
return (int32_t)len;
}
int32_t sendto(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port)
{
uint8_t tmp = 0;
uint16_t freesize = 0;
uint32_t taddr;
CHECK_SOCKNUM();
switch(getSn_MR(sn) & 0x0F)
{
case Sn_MR_UDP:
case Sn_MR_MACRAW:
// break;
// #if ( _WIZCHIP_ < 5200 )
case Sn_MR_IPRAW:
break;
// #endif
default:
return SOCKERR_SOCKMODE;
}
CHECK_SOCKDATA();
//M20140501 : For avoiding fatal error on memory align mismatched
//if(*((uint32_t*)addr) == 0) return SOCKERR_IPINVALID;
//{
//uint32_t taddr;
taddr = ((uint32_t)addr[0]) & 0x000000FF;
taddr = (taddr << 8) + ((uint32_t)addr[1] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[2] & 0x000000FF);
taddr = (taddr << 8) + ((uint32_t)addr[3] & 0x000000FF);
//}
//
//if(*((uint32_t*)addr) == 0) return SOCKERR_IPINVALID;
if((taddr == 0) && ((getSn_MR(sn)&Sn_MR_MACRAW) != Sn_MR_MACRAW)) return SOCKERR_IPINVALID;
if((port == 0) && ((getSn_MR(sn)&Sn_MR_MACRAW) != Sn_MR_MACRAW)) return SOCKERR_PORTZERO;
tmp = getSn_SR(sn);
//#if ( _WIZCHIP_ < 5200 )
if((tmp != SOCK_MACRAW) && (tmp != SOCK_UDP) && (tmp != SOCK_IPRAW)) return SOCKERR_SOCKSTATUS;
//#else
// if(tmp != SOCK_MACRAW && tmp != SOCK_UDP) return SOCKERR_SOCKSTATUS;
//#endif
setSn_DIPR(sn,addr);
setSn_DPORT(sn,port);
freesize = getSn_TxMAX(sn);
if (len > freesize) len = freesize; // check size not to exceed MAX size.
while(1)
{
freesize = getSn_TX_FSR(sn);
if(getSn_SR(sn) == SOCK_CLOSED) return SOCKERR_SOCKCLOSED;
if( (sock_io_mode & (1<<sn)) && (len > freesize) ) return SOCK_BUSY;
if(len <= freesize) break;
};
wiz_send_data(sn, buf, len);
#if _WIZCHIP_ < 5500 //M20150401 : for WIZCHIP Errata #4, #5 (ARP errata)
getSIPR((uint8_t*)&taddr);
if(taddr == 0)
{
getSUBR((uint8_t*)&taddr);
setSUBR((uint8_t*)"\x00\x00\x00\x00");
}
else taddr = 0;
#endif
//A20150601 : For W5300
#if _WIZCHIP_ == 5300
setSn_TX_WRSR(sn, len);
#endif
//
setSn_CR(sn,Sn_CR_SEND);
/* wait to process the command... */
while(getSn_CR(sn));
while(1)
{
tmp = getSn_IR(sn);
if(tmp & Sn_IR_SENDOK)
{
setSn_IR(sn, Sn_IR_SENDOK);
break;
}
//M:20131104
//else if(tmp & Sn_IR_TIMEOUT) return SOCKERR_TIMEOUT;
else if(tmp & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
//M20150409 : Fixed the lost of sign bits by type casting.
//len = (uint16_t)SOCKERR_TIMEOUT;
//break;
#if _WIZCHIP_ < 5500 //M20150401 : for WIZCHIP Errata #4, #5 (ARP errata)
if(taddr) setSUBR((uint8_t*)&taddr);
#endif
return SOCKERR_TIMEOUT;
}
////////////
}
#if _WIZCHIP_ < 5500 //M20150401 : for WIZCHIP Errata #4, #5 (ARP errata)
if(taddr) setSUBR((uint8_t*)&taddr);
#endif
//M20150409 : Explicit Type Casting
//return len;
return (int32_t)len;
}
int32_t recvfrom(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port)
{
//M20150601 : For W5300
#if _WIZCHIP_ == 5300
uint16_t mr;
uint16_t mr1;
#else
uint8_t mr;
#endif
//
uint8_t head[8];
uint16_t pack_len=0;
CHECK_SOCKNUM();
//CHECK_SOCKMODE(Sn_MR_UDP);
//A20150601
#if _WIZCHIP_ == 5300
mr1 = getMR();
#endif
switch((mr=getSn_MR(sn)) & 0x0F)
{
case Sn_MR_UDP:
case Sn_MR_IPRAW:
case Sn_MR_MACRAW:
break;
#if ( _WIZCHIP_ < 5200 )
case Sn_MR_PPPoE:
break;
#endif
default:
return SOCKERR_SOCKMODE;
}
CHECK_SOCKDATA();
if(sock_remained_size[sn] == 0)
{
while(1)
{
pack_len = getSn_RX_RSR(sn);
if(getSn_SR(sn) == SOCK_CLOSED) return SOCKERR_SOCKCLOSED;
if( (sock_io_mode & (1<<sn)) && (pack_len == 0) ) return SOCK_BUSY;
if(pack_len != 0) break;
};
}
//D20150601 : Move it to bottom
// sock_pack_info[sn] = PACK_COMPLETED;
switch (mr & 0x07)
{
case Sn_MR_UDP :
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 8);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
// read peer's IP address, port number & packet length
//A20150601 : For W5300
#if _WIZCHIP_ == 5300
if(mr1 & MR_FS)
{
addr[0] = head[1];
addr[1] = head[0];
addr[2] = head[3];
addr[3] = head[2];
*port = head[5];
*port = (*port << 8) + head[4];
sock_remained_size[sn] = head[7];
sock_remained_size[sn] = (sock_remained_size[sn] << 8) + head[6];
}
else
{
#endif
addr[0] = head[0];
addr[1] = head[1];
addr[2] = head[2];
addr[3] = head[3];
*port = head[4];
*port = (*port << 8) + head[5];
sock_remained_size[sn] = head[6];
sock_remained_size[sn] = (sock_remained_size[sn] << 8) + head[7];
#if _WIZCHIP_ == 5300
}
#endif
sock_pack_info[sn] = PACK_FIRST;
}
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
//A20150601 : For W5300
len = pack_len;
#if _WIZCHIP_ == 5300
if(sock_pack_info[sn] & PACK_FIFOBYTE)
{
*buf++ = sock_remained_byte[sn];
pack_len -= 1;
sock_remained_size[sn] -= 1;
sock_pack_info[sn] &= ~PACK_FIFOBYTE;
}
#endif
//
// Need to packet length check (default 1472)
//
wiz_recv_data(sn, buf, pack_len); // data copy.
break;
case Sn_MR_MACRAW :
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 2);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
// read peer's IP address, port number & packet length
sock_remained_size[sn] = head[0];
sock_remained_size[sn] = (sock_remained_size[sn] <<8) + head[1] -2;
#if _WIZCHIP_ == W5300
if(sock_remained_size[sn] & 0x01)
sock_remained_size[sn] = sock_remained_size[sn] + 1 - 4;
else
sock_remained_size[sn] -= 4;
#endif
if(sock_remained_size[sn] > 1514)
{
close(sn);
return SOCKFATAL_PACKLEN;
}
sock_pack_info[sn] = PACK_FIRST;
}
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
wiz_recv_data(sn,buf,pack_len);
break;
//#if ( _WIZCHIP_ < 5200 )
case Sn_MR_IPRAW:
if(sock_remained_size[sn] == 0)
{
wiz_recv_data(sn, head, 6);
setSn_CR(sn,Sn_CR_RECV);
while(getSn_CR(sn));
addr[0] = head[0];
addr[1] = head[1];
addr[2] = head[2];
addr[3] = head[3];
sock_remained_size[sn] = head[4];
//M20150401 : For Typing Error
//sock_remaiend_size[sn] = (sock_remained_size[sn] << 8) + head[5];
sock_remained_size[sn] = (sock_remained_size[sn] << 8) + head[5];
sock_pack_info[sn] = PACK_FIRST;
}
//
// Need to packet length check
//
if(len < sock_remained_size[sn]) pack_len = len;
else pack_len = sock_remained_size[sn];
wiz_recv_data(sn, buf, pack_len); // data copy.
break;
//#endif
default:
wiz_recv_ignore(sn, pack_len); // data copy.
sock_remained_size[sn] = pack_len;
break;
}
setSn_CR(sn,Sn_CR_RECV);
/* wait to process the command... */
while(getSn_CR(sn)) ;
sock_remained_size[sn] -= pack_len;
//M20150601 :
//if(sock_remained_size[sn] != 0) sock_pack_info[sn] |= 0x01;
if(sock_remained_size[sn] != 0)
{
sock_pack_info[sn] |= PACK_REMAINED;
#if _WIZCHIP_ == 5300
if(pack_len & 0x01) sock_pack_info[sn] |= PACK_FIFOBYTE;
#endif
}
else sock_pack_info[sn] = PACK_COMPLETED;
#if _WIZCHIP_ == 5300
pack_len = len;
#endif
//
//M20150409 : Explicit Type Casting
//return pack_len;
return (int32_t)pack_len;
}
int8_t ctlsocket(uint8_t sn, ctlsock_type cstype, void* arg)
{
uint8_t tmp = 0;
CHECK_SOCKNUM();
switch(cstype)
{
case CS_SET_IOMODE:
tmp = *((uint8_t*)arg);
if(tmp == SOCK_IO_NONBLOCK) sock_io_mode |= (1<<sn);
else if(tmp == SOCK_IO_BLOCK) sock_io_mode &= ~(1<<sn);
else return SOCKERR_ARG;
break;
case CS_GET_IOMODE:
//M20140501 : implict type casting -> explict type casting
//*((uint8_t*)arg) = (sock_io_mode >> sn) & 0x0001;
*((uint8_t*)arg) = (uint8_t)((sock_io_mode >> sn) & 0x0001);
//
break;
case CS_GET_MAXTXBUF:
*((uint16_t*)arg) = getSn_TxMAX(sn);
break;
case CS_GET_MAXRXBUF:
*((uint16_t*)arg) = getSn_RxMAX(sn);
break;
case CS_CLR_INTERRUPT:
if( (*(uint8_t*)arg) > SIK_ALL) return SOCKERR_ARG;
setSn_IR(sn,*(uint8_t*)arg);
break;
case CS_GET_INTERRUPT:
*((uint8_t*)arg) = getSn_IR(sn);
break;
#if _WIZCHIP_ != 5100
case CS_SET_INTMASK:
if( (*(uint8_t*)arg) > SIK_ALL) return SOCKERR_ARG;
setSn_IMR(sn,*(uint8_t*)arg);
break;
case CS_GET_INTMASK:
*((uint8_t*)arg) = getSn_IMR(sn);
break;
#endif
default:
return SOCKERR_ARG;
}
return SOCK_OK;
}
int8_t setsockopt(uint8_t sn, sockopt_type sotype, void* arg)
{
// M20131220 : Remove warning
//uint8_t tmp;
CHECK_SOCKNUM();
switch(sotype)
{
case SO_TTL:
setSn_TTL(sn,*(uint8_t*)arg);
break;
case SO_TOS:
setSn_TOS(sn,*(uint8_t*)arg);
break;
case SO_MSS:
setSn_MSSR(sn,*(uint16_t*)arg);
break;
case SO_DESTIP:
setSn_DIPR(sn, (uint8_t*)arg);
break;
case SO_DESTPORT:
setSn_DPORT(sn, *(uint16_t*)arg);
break;
#if _WIZCHIP_ != 5100
case SO_KEEPALIVESEND:
CHECK_SOCKMODE(Sn_MR_TCP);
#if _WIZCHIP_ > 5200
if(getSn_KPALVTR(sn) != 0) return SOCKERR_SOCKOPT;
#endif
setSn_CR(sn,Sn_CR_SEND_KEEP);
while(getSn_CR(sn) != 0)
{
// M20131220
//if ((tmp = getSn_IR(sn)) & Sn_IR_TIMEOUT)
if (getSn_IR(sn) & Sn_IR_TIMEOUT)
{
setSn_IR(sn, Sn_IR_TIMEOUT);
return SOCKERR_TIMEOUT;
}
}
break;
#if _WIZCHIP_ > 5200
case SO_KEEPALIVEAUTO:
CHECK_SOCKMODE(Sn_MR_TCP);
setSn_KPALVTR(sn,*(uint8_t*)arg);
break;
#endif
#endif
default:
return SOCKERR_ARG;
}
return SOCK_OK;
}
int8_t getsockopt(uint8_t sn, sockopt_type sotype, void* arg)
{
CHECK_SOCKNUM();
switch(sotype)
{
case SO_FLAG:
*(uint8_t*)arg = getSn_MR(sn) & 0xF0;
break;
case SO_TTL:
*(uint8_t*) arg = getSn_TTL(sn);
break;
case SO_TOS:
*(uint8_t*) arg = getSn_TOS(sn);
break;
case SO_MSS:
*(uint16_t*) arg = getSn_MSSR(sn);
break;
case SO_DESTIP:
getSn_DIPR(sn, (uint8_t*)arg);
break;
case SO_DESTPORT:
*(uint16_t*) arg = getSn_DPORT(sn);
break;
#if _WIZCHIP_ > 5200
case SO_KEEPALIVEAUTO:
CHECK_SOCKMODE(Sn_MR_TCP);
*(uint16_t*) arg = getSn_KPALVTR(sn);
break;
#endif
case SO_SENDBUF:
*(uint16_t*) arg = getSn_TX_FSR(sn);
break;
case SO_RECVBUF:
*(uint16_t*) arg = getSn_RX_RSR(sn);
break;
case SO_STATUS:
*(uint8_t*) arg = getSn_SR(sn);
break;
case SO_REMAINSIZE:
if(getSn_MR(sn) & Sn_MR_TCP)
*(uint16_t*)arg = getSn_RX_RSR(sn);
else
*(uint16_t*)arg = sock_remained_size[sn];
break;
case SO_PACKINFO:
//CHECK_SOCKMODE(Sn_MR_TCP);
#if _WIZCHIP_ != 5300
if((getSn_MR(sn) == Sn_MR_TCP))
return SOCKERR_SOCKMODE;
#endif
*(uint8_t*)arg = sock_pack_info[sn];
break;
default:
return SOCKERR_SOCKOPT;
}
return SOCK_OK;
}

489
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/socket.h Normal file
View File

@@ -0,0 +1,489 @@
//*****************************************************************************
//
//! \file socket.h
//! \brief SOCKET APIs Header file.
//! \details SOCKET APIs like as berkeley socket api.
//! \version 1.0.2
//! \date 2013/10/21
//! \par Revision history
//! <2015/02/05> Notice
//! The version history is not updated after this point.
//! Download the latest version directly from GitHub. Please visit the our GitHub repository for ioLibrary.
//! >> https://github.com/Wiznet/ioLibrary_Driver
//! <2014/05/01> V1.0.2. Refer to M20140501
//! 1. Modify the comment : SO_REMAINED -> PACK_REMAINED
//! 2. Add the comment as zero byte udp data reception in getsockopt().
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
/**
* @defgroup WIZnet_socket_APIs 1. WIZnet socket APIs
* @brief WIZnet socket APIs are based on Berkeley socket APIs, thus it has much similar name and interface.
* But there is a little bit of difference.
* @details
* <b> Comparison between WIZnet and Berkeley SOCKET APIs </b>
* <table>
* <tr> <td><b>API</b></td> <td><b>WIZnet</b></td> <td><b>Berkeley</b></td> </tr>
* <tr> <td>socket()</td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>bind()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>listen()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>connect()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>accept()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>recv()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>send()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>recvfrom()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>sendto()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>closesocket()</b></td> <td>O<br>close() & disconnect()</td> <td>O</td> </tr>
* </table>
* There are @b bind() and @b accept() functions in @b Berkeley SOCKET API but,
* not in @b WIZnet SOCKET API. Because socket() of WIZnet is not only creating a SOCKET but also binding a local port number,
* and listen() of WIZnet is not only listening to connection request from client but also accepting the connection request. \n
* When you program "TCP SERVER" with Berkeley SOCKET API, you can use only one listen port.
* When the listen SOCKET accepts a connection request from a client, it keeps listening.
* After accepting the connection request, a new SOCKET is created and the new SOCKET is used in communication with the client. \n
* Following figure shows network flow diagram by Berkeley SOCKET API.
* @image html Berkeley_SOCKET.jpg "<Berkeley SOCKET API>"
* But, When you program "TCP SERVER" with WIZnet SOCKET API, you can use as many as 8 listen SOCKET with same port number. \n
* Because there's no accept() in WIZnet SOCKET APIs, when the listen SOCKET accepts a connection request from a client,
* it is changed in order to communicate with the client.
* And the changed SOCKET is not listening any more and is dedicated for communicating with the client. \n
* If there're many listen SOCKET with same listen port number and a client requests a connection,
* the SOCKET which has the smallest SOCKET number accepts the request and is changed as communication SOCKET. \n
* Following figure shows network flow diagram by WIZnet SOCKET API.
* @image html WIZnet_SOCKET.jpg "<WIZnet SOCKET API>"
*/
#ifndef _SOCKET_H_
#define _SOCKET_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "wizchip_conf.h"
#define SOCKET uint8_t ///< SOCKET type define for legacy driver
#define SOCK_OK 1 ///< Result is OK about socket process.
#define SOCK_BUSY 0 ///< Socket is busy on processing the operation. Valid only Non-block IO Mode.
#define SOCK_FATAL -1000 ///< Result is fatal error about socket process.
#define SOCK_ERROR 0
#define SOCKERR_SOCKNUM (SOCK_ERROR - 1) ///< Invalid socket number
#define SOCKERR_SOCKOPT (SOCK_ERROR - 2) ///< Invalid socket option
#define SOCKERR_SOCKINIT (SOCK_ERROR - 3) ///< Socket is not initialized or SIPR is Zero IP address when Sn_MR_TCP
#define SOCKERR_SOCKCLOSED (SOCK_ERROR - 4) ///< Socket unexpectedly closed.
#define SOCKERR_SOCKMODE (SOCK_ERROR - 5) ///< Invalid socket mode for socket operation.
#define SOCKERR_SOCKFLAG (SOCK_ERROR - 6) ///< Invalid socket flag
#define SOCKERR_SOCKSTATUS (SOCK_ERROR - 7) ///< Invalid socket status for socket operation.
#define SOCKERR_ARG (SOCK_ERROR - 10) ///< Invalid argument.
#define SOCKERR_PORTZERO (SOCK_ERROR - 11) ///< Port number is zero
#define SOCKERR_IPINVALID (SOCK_ERROR - 12) ///< Invalid IP address
#define SOCKERR_TIMEOUT (SOCK_ERROR - 13) ///< Timeout occurred
#define SOCKERR_DATALEN (SOCK_ERROR - 14) ///< Data length is zero or greater than buffer max size.
#define SOCKERR_BUFFER (SOCK_ERROR - 15) ///< Socket buffer is not enough for data communication.
#define SOCKFATAL_PACKLEN (SOCK_FATAL - 1) ///< Invalid packet length. Fatal Error.
/*
* SOCKET FLAG
*/
#define SF_ETHER_OWN (Sn_MR_MFEN) ///< In @ref Sn_MR_MACRAW, Receive only the packet as broadcast, multicast and own packet
#define SF_IGMP_VER2 (Sn_MR_MC) ///< In @ref Sn_MR_UDP with \ref SF_MULTI_ENABLE, Select IGMP version 2.
#define SF_TCP_NODELAY (Sn_MR_ND) ///< In @ref Sn_MR_TCP, Use to nodelayed ack.
#define SF_MULTI_ENABLE (Sn_MR_MULTI) ///< In @ref Sn_MR_UDP, Enable multicast mode.
#if _WIZCHIP_ == 5500
#define SF_BROAD_BLOCK (Sn_MR_BCASTB) ///< In @ref Sn_MR_UDP or @ref Sn_MR_MACRAW, Block broadcast packet. Valid only in W5500
#define SF_MULTI_BLOCK (Sn_MR_MMB) ///< In @ref Sn_MR_MACRAW, Block multicast packet. Valid only in W5500
#define SF_IPv6_BLOCK (Sn_MR_MIP6B) ///< In @ref Sn_MR_MACRAW, Block IPv6 packet. Valid only in W5500
#define SF_UNI_BLOCK (Sn_MR_UCASTB) ///< In @ref Sn_MR_UDP with \ref SF_MULTI_ENABLE. Valid only in W5500
#endif
//A201505 : For W5300
#if _WIZCHIP_ == 5300
#define SF_TCP_ALIGN 0x02 ///< Valid only \ref Sn_MR_TCP and W5300, refer to \ref Sn_MR_ALIGN
#endif
#define SF_IO_NONBLOCK 0x01 ///< Socket nonblock io mode. It used parameter in \ref socket().
/*
* UDP & MACRAW Packet Infomation
*/
#define PACK_FIRST 0x80 ///< In Non-TCP packet, It indicates to start receiving a packet. (When W5300, This flag can be applied)
#define PACK_REMAINED 0x01 ///< In Non-TCP packet, It indicates to remain a packet to be received. (When W5300, This flag can be applied)
#define PACK_COMPLETED 0x00 ///< In Non-TCP packet, It indicates to complete to receive a packet. (When W5300, This flag can be applied)
//A20150601 : For Integrating with W5300
#define PACK_FIFOBYTE 0x02 ///< Valid only W5300, It indicate to have read already the Sn_RX_FIFOR.
//
/**
* @ingroup WIZnet_socket_APIs
* @brief Open a socket.
* @details Initializes the socket with 'sn' passed as parameter and open.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param protocol Protocol type to operate such as TCP, UDP and MACRAW.
* @param port Port number to be bined.
* @param flag Socket flags as \ref SF_ETHER_OWN, \ref SF_IGMP_VER2, \ref SF_TCP_NODELAY, \ref SF_MULTI_ENABLE, \ref SF_IO_NONBLOCK and so on.\n
* Valid flags only in W5500 : @ref SF_BROAD_BLOCK, @ref SF_MULTI_BLOCK, @ref SF_IPv6_BLOCK, and @ref SF_UNI_BLOCK.
* @sa Sn_MR
*
* @return @b Success : The socket number @b 'sn' passed as parameter\n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Not support socket mode as TCP, UDP, and so on. \n
* @ref SOCKERR_SOCKFLAG - Invaild socket flag.
*/
int8_t socket(uint8_t sn, uint8_t protocol, uint16_t port, uint8_t flag);
/**
* @ingroup WIZnet_socket_APIs
* @brief Close a socket.
* @details It closes the socket with @b'sn' passed as parameter.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail : @ref SOCKERR_SOCKNUM - Invalid socket number
*/
int8_t close(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Listen to a connection request from a client.
* @details It is listening to a connection request from a client.
* If connection request is accepted successfully, the connection is established. Socket sn is used in passive(server) mode.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKINIT - Socket is not initialized \n
* @ref SOCKERR_SOCKCLOSED - Socket closed unexpectedly.
*/
int8_t listen(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to connect a server.
* @details It requests connection to the server with destination IP address and port number passed as parameter.\n
* @note It is valid only in TCP client mode.
* In block io mode, it does not return until connection is completed.
* In Non-block io mode, it return @ref SOCK_BUSY immediately.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Invalid socket mode\n
* @ref SOCKERR_SOCKINIT - Socket is not initialized\n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_TIMEOUT - Timeout occurred during request connection\n
* @ref SOCK_BUSY - In non-block io mode, it returned immediately\n
*/
int8_t connect(uint8_t sn, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to disconnect a connection socket.
* @details It sends request message to disconnect the TCP socket 'sn' passed as parameter to the server or client.
* @note It is valid only in TCP server or client mode. \n
* In block io mode, it does not return until disconnection is completed. \n
* In Non-block io mode, it return @ref SOCK_BUSY immediately. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int8_t disconnect(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Send data to the connected peer in TCP socket.
* @details It is used to send outgoing data to the connected socket.
* @note It is valid only in TCP server or client mode. It can't send data greater than socket buffer size. \n
* In block io mode, It doesn't return until data send is completed - socket buffer size is greater than data. \n
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer containing data to be sent.
* @param len The byte length of data in buf.
* @return @b Success : The sent data size \n
* @b Fail : \n @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t send(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive data from the connected peer.
* @details It is used to read incoming data from the connected socket.\n
* It waits for data as much as the application wants to receive.
* @note It is valid only in TCP server or client mode. It can't receive data greater than socket buffer size. \n
* In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer. \n
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer. \n
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* @return @b Success : The real received data size \n
* @b Fail :\n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t recv(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Sends datagram to the peer with destination IP address and port number passed as parameter.
* @details It sends datagram of UDP or MACRAW to the peer with destination IP address and port number passed as parameter.\n
* Even if the connectionless socket has been previously connected to a specific address,
* the address and port number parameters override the destination address for that particular datagram only.
* @note In block io mode, It doesn't return until data send is completed - socket buffer size is greater than <I>len</I>.
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to send outgoing data.
* @param len The byte length of data in buf.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : The sent data size \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_SOCKCLOSED - Socket unexpectedly closed \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t sendto(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive datagram of UDP or MACRAW
* @details This function is an application I/F function which is used to receive the data in other then TCP mode. \n
* This function is used to receive UDP and MAC_RAW mode, and handle the header as well.
* This function can divide to received the packet data.
* On the MACRAW SOCKET, the addr and port parameters are ignored.
* @note In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* When the received packet size <= len, receives data as packet sized.
* When others, receives data as len.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* It is valid only when the first call recvfrom for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
* @param port Pointer variable of destination port number.
* It is valid only when the first call recvform for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
*
* @return @b Success : This function return real received data size for success.\n
* @b Fail : @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKBUSY - Socket is busy.
*/
int32_t recvfrom(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port);
/////////////////////////////
// SOCKET CONTROL & OPTION //
/////////////////////////////
#define SOCK_IO_BLOCK 0 ///< Socket Block IO Mode in @ref setsockopt().
#define SOCK_IO_NONBLOCK 1 ///< Socket Non-block IO Mode in @ref setsockopt().
/**
* @defgroup DATA_TYPE DATA TYPE
*/
/**
* @ingroup DATA_TYPE
* @brief The kind of Socket Interrupt.
* @sa Sn_IR, Sn_IMR, setSn_IR(), getSn_IR(), setSn_IMR(), getSn_IMR()
*/
typedef enum
{
SIK_CONNECTED = (1 << 0), ///< connected
SIK_DISCONNECTED = (1 << 1), ///< disconnected
SIK_RECEIVED = (1 << 2), ///< data received
SIK_TIMEOUT = (1 << 3), ///< timeout occurred
SIK_SENT = (1 << 4), ///< send ok
//M20150410 : Remove the comma of last member
//SIK_ALL = 0x1F, ///< all interrupt
SIK_ALL = 0x1F ///< all interrupt
}sockint_kind;
/**
* @ingroup DATA_TYPE
* @brief The type of @ref ctlsocket().
*/
typedef enum
{
CS_SET_IOMODE, ///< set socket IO mode with @ref SOCK_IO_BLOCK or @ref SOCK_IO_NONBLOCK
CS_GET_IOMODE, ///< get socket IO mode
CS_GET_MAXTXBUF, ///< get the size of socket buffer allocated in TX memory
CS_GET_MAXRXBUF, ///< get the size of socket buffer allocated in RX memory
CS_CLR_INTERRUPT, ///< clear the interrupt of socket with @ref sockint_kind
CS_GET_INTERRUPT, ///< get the socket interrupt. refer to @ref sockint_kind
#if _WIZCHIP_ > 5100
CS_SET_INTMASK, ///< set the interrupt mask of socket with @ref sockint_kind, Not supported in W5100
CS_GET_INTMASK ///< get the masked interrupt of socket. refer to @ref sockint_kind, Not supported in W5100
#endif
}ctlsock_type;
/**
* @ingroup DATA_TYPE
* @brief The type of socket option in @ref setsockopt() or @ref getsockopt()
*/
typedef enum
{
SO_FLAG, ///< Valid only in getsockopt(), For set flag of socket refer to <I>flag</I> in @ref socket().
SO_TTL, ///< Set TTL. @ref Sn_TTL ( @ref setSn_TTL(), @ref getSn_TTL() )
SO_TOS, ///< Set TOS. @ref Sn_TOS ( @ref setSn_TOS(), @ref getSn_TOS() )
SO_MSS, ///< Set MSS. @ref Sn_MSSR ( @ref setSn_MSSR(), @ref getSn_MSSR() )
SO_DESTIP, ///< Set the destination IP address. @ref Sn_DIPR ( @ref setSn_DIPR(), @ref getSn_DIPR() )
SO_DESTPORT, ///< Set the destination Port number. @ref Sn_DPORT ( @ref setSn_DPORT(), @ref getSn_DPORT() )
#if _WIZCHIP_ != 5100
SO_KEEPALIVESEND, ///< Valid only in setsockopt. Manually send keep-alive packet in TCP mode, Not supported in W5100
#if _WIZCHIP_ > 5200
SO_KEEPALIVEAUTO, ///< Set/Get keep-alive auto transmission timer in TCP mode, Not supported in W5100, W5200
#endif
#endif
SO_SENDBUF, ///< Valid only in getsockopt. Get the free data size of Socekt TX buffer. @ref Sn_TX_FSR, @ref getSn_TX_FSR()
SO_RECVBUF, ///< Valid only in getsockopt. Get the received data size in socket RX buffer. @ref Sn_RX_RSR, @ref getSn_RX_RSR()
SO_STATUS, ///< Valid only in getsockopt. Get the socket status. @ref Sn_SR, @ref getSn_SR()
SO_REMAINSIZE, ///< Valid only in getsockopt. Get the remained packet size in other then TCP mode.
SO_PACKINFO ///< Valid only in getsockopt. Get the packet information as @ref PACK_FIRST, @ref PACK_REMAINED, and @ref PACK_COMPLETED in other then TCP mode.
}sockopt_type;
/**
* @ingroup WIZnet_socket_APIs
* @brief Control socket.
* @details Control IO mode, Interrupt & Mask of socket and get the socket buffer information.
* Refer to @ref ctlsock_type.
* @param sn socket number
* @param cstype type of control socket. refer to @ref ctlsock_type.
* @param arg Data type and value is determined according to @ref ctlsock_type. \n
* <table>
* <tr> <td> @b cstype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref CS_SET_IOMODE \n @ref CS_GET_IOMODE </td> <td> uint8_t </td><td>@ref SOCK_IO_BLOCK @ref SOCK_IO_NONBLOCK</td></tr>
* <tr> <td> @ref CS_GET_MAXTXBUF \n @ref CS_GET_MAXRXBUF </td> <td> uint16_t </td><td> 0 ~ 16K </td></tr>
* <tr> <td> @ref CS_CLR_INTERRUPT \n @ref CS_GET_INTERRUPT \n @ref CS_SET_INTMASK \n @ref CS_GET_INTMASK </td> <td> @ref sockint_kind </td><td> @ref SIK_CONNECTED, etc. </td></tr>
* </table>
* @return @b Success @ref SOCK_OK \n
* @b fail @ref SOCKERR_ARG - Invalid argument\n
*/
int8_t ctlsocket(uint8_t sn, ctlsock_type cstype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief set socket options
* @details Set socket option like as TTL, MSS, TOS, and so on. Refer to @ref sockopt_type.
*
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_TTL </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_KEEPALIVESEND </td> <td> null </td><td> null </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_TIMEOUT - Timeout occurred when sending keep-alive packet \n
*/
int8_t setsockopt(uint8_t sn, sockopt_type sotype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief get socket options
* @details Get socket option like as FLAG, TTL, MSS, and so on. Refer to @ref sockopt_type
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td>@b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_FLAG </td> <td> uint8_t </td><td> @ref SF_ETHER_OWN, etc... </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* <tr> <td> @ref SO_SENDBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_RECVBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_STATUS </td> <td> uint8_t </td><td> @ref SOCK_ESTABLISHED, etc.. </td></tr>
* <tr> <td> @ref SO_REMAINSIZE </td> <td> uint16_t </td><td> 0~ 65535 </td></tr>
* <tr> <td> @ref SO_PACKINFO </td> <td> uint8_t </td><td> @ref PACK_FIRST, etc... </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* @note
* The option as PACK_REMAINED and SO_PACKINFO is valid only in NON-TCP mode and after call @ref recvfrom(). \n
* When SO_PACKINFO value is PACK_FIRST and the return value of recvfrom() is zero,
* This means the zero byte UDP data(UDP Header only) received.
*/
int8_t getsockopt(uint8_t sn, sockopt_type sotype, void* arg);
#ifdef __cplusplus
}
#endif
#endif // _SOCKET_H_

903
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/wizchip_conf.c Normal file
View File

@@ -0,0 +1,903 @@
//****************************************************************************/
//!
//! \file wizchip_conf.c
//! \brief WIZCHIP Config Header File.
//! \version 1.0.1
//! \date 2013/10/21
//! \par Revision history
//! <2015/02/05> Notice
//! The version history is not updated after this point.
//! Download the latest version directly from GitHub. Please visit the our GitHub repository for ioLibrary.
//! >> https://github.com/Wiznet/ioLibrary_Driver
//! <2014/05/01> V1.0.1 Refer to M20140501
//! 1. Explicit type casting in wizchip_bus_readdata() & wizchip_bus_writedata()
// Issued by Mathias ClauBen.
//! uint32_t type converts into ptrdiff_t first. And then recoverting it into uint8_t*
//! For remove the warning when pointer type size is not 32bit.
//! If ptrdiff_t doesn't support in your complier, You should must replace ptrdiff_t into your suitable pointer type.
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************/
//A20140501 : for use the type - ptrdiff_t
#include <stddef.h>
//
#include "wizchip_conf.h"
/////////////
//M20150401 : Remove ; in the default callback function such as wizchip_cris_enter(), wizchip_cs_select() and etc.
/////////////
/**
* @brief Default function to enable interrupt.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_cris_enter(void) {};
void wizchip_cris_enter(void) {}
/**
* @brief Default function to disable interrupt.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_cris_exit(void) {};
void wizchip_cris_exit(void) {}
/**
* @brief Default function to select chip.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_cs_select(void) {};
void wizchip_cs_select(void) {}
/**
* @brief Default function to deselect chip.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_cs_deselect(void) {};
void wizchip_cs_deselect(void) {}
/**
* @brief Default function to read in direct or indirect interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//M20150601 : Rename the function for integrating with W5300
//uint8_t wizchip_bus_readbyte(uint32_t AddrSel) { return * ((volatile uint8_t *)((ptrdiff_t) AddrSel)); }
iodata_t wizchip_bus_readdata(uint32_t AddrSel) { return * ((volatile iodata_t *)((ptrdiff_t) AddrSel)); }
/**
* @brief Default function to write in direct or indirect interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//M20150601 : Rename the function for integrating with W5300
//void wizchip_bus_writebyte(uint32_t AddrSel, uint8_t wb) { *((volatile uint8_t*)((ptrdiff_t)AddrSel)) = wb; }
void wizchip_bus_writedata(uint32_t AddrSel, iodata_t wb) { *((volatile iodata_t*)((ptrdiff_t)AddrSel)) = wb; }
/**
* @brief Default function to read in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//uint8_t wizchip_spi_readbyte(void) {return 0;};
uint8_t wizchip_spi_readbyte(void) {return 0;}
/**
* @brief Default function to write in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_spi_writebyte(uint8_t wb) {};
void wizchip_spi_writebyte(uint8_t wb) {}
/**
* @brief Default function to burst read in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_spi_readburst(uint8_t* pBuf, uint16_t len) {};
void wizchip_spi_readburst(uint8_t* pBuf, uint16_t len) {}
/**
* @brief Default function to burst write in SPI interface.
* @note This function help not to access wrong address. If you do not describe this function or register any functions,
* null function is called.
*/
//void wizchip_spi_writeburst(uint8_t* pBuf, uint16_t len) {};
void wizchip_spi_writeburst(uint8_t* pBuf, uint16_t len) {}
/**
* @\ref _WIZCHIP instance
*/
//
//M20150401 : For a compiler didnot support a member of structure
// Replace the assignment of struct members with the assingment of array
//
/*
_WIZCHIP WIZCHIP =
{
.id = _WIZCHIP_ID_,
.if_mode = _WIZCHIP_IO_MODE_,
.CRIS._enter = wizchip_cris_enter,
.CRIS._exit = wizchip_cris_exit,
.CS._select = wizchip_cs_select,
.CS._deselect = wizchip_cs_deselect,
.IF.BUS._read_byte = wizchip_bus_readbyte,
.IF.BUS._write_byte = wizchip_bus_writebyte
// .IF.SPI._read_byte = wizchip_spi_readbyte,
// .IF.SPI._write_byte = wizchip_spi_writebyte
};
*/
_WIZCHIP WIZCHIP =
{
_WIZCHIP_IO_MODE_,
_WIZCHIP_ID_ ,
{
wizchip_cris_enter,
wizchip_cris_exit
},
{
wizchip_cs_select,
wizchip_cs_deselect
},
{
{
//M20150601 : Rename the function
//wizchip_bus_readbyte,
//wizchip_bus_writebyte
wizchip_bus_readdata,
wizchip_bus_writedata
},
}
};
static uint8_t _DNS_[4]; // DNS server ip address
static dhcp_mode _DHCP_; // DHCP mode
void reg_wizchip_cris_cbfunc(void(*cris_en)(void), void(*cris_ex)(void))
{
if(!cris_en || !cris_ex)
{
WIZCHIP.CRIS._enter = wizchip_cris_enter;
WIZCHIP.CRIS._exit = wizchip_cris_exit;
}
else
{
WIZCHIP.CRIS._enter = cris_en;
WIZCHIP.CRIS._exit = cris_ex;
}
}
void reg_wizchip_cs_cbfunc(void(*cs_sel)(void), void(*cs_desel)(void))
{
if(!cs_sel || !cs_desel)
{
WIZCHIP.CS._select = wizchip_cs_select;
WIZCHIP.CS._deselect = wizchip_cs_deselect;
}
else
{
WIZCHIP.CS._select = cs_sel;
WIZCHIP.CS._deselect = cs_desel;
}
}
//M20150515 : For integrating with W5300
//void reg_wizchip_bus_cbfunc(uint8_t(*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, uint8_t wb))
void reg_wizchip_bus_cbfunc(iodata_t(*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, iodata_t wb))
{
while(!(WIZCHIP.if_mode & _WIZCHIP_IO_MODE_BUS_));
//M20150601 : Rename call back function for integrating with W5300
/*
if(!bus_rb || !bus_wb)
{
WIZCHIP.IF.BUS._read_byte = wizchip_bus_readbyte;
WIZCHIP.IF.BUS._write_byte = wizchip_bus_writebyte;
}
else
{
WIZCHIP.IF.BUS._read_byte = bus_rb;
WIZCHIP.IF.BUS._write_byte = bus_wb;
}
*/
if(!bus_rb || !bus_wb)
{
WIZCHIP.IF.BUS._read_data = wizchip_bus_readdata;
WIZCHIP.IF.BUS._write_data = wizchip_bus_writedata;
}
else
{
WIZCHIP.IF.BUS._read_data = bus_rb;
WIZCHIP.IF.BUS._write_data = bus_wb;
}
}
void reg_wizchip_spi_cbfunc(uint8_t (*spi_rb)(void), void (*spi_wb)(uint8_t wb))
{
while(!(WIZCHIP.if_mode & _WIZCHIP_IO_MODE_SPI_));
if(!spi_rb || !spi_wb)
{
WIZCHIP.IF.SPI._read_byte = wizchip_spi_readbyte;
WIZCHIP.IF.SPI._write_byte = wizchip_spi_writebyte;
}
else
{
WIZCHIP.IF.SPI._read_byte = spi_rb;
WIZCHIP.IF.SPI._write_byte = spi_wb;
}
}
// 20140626 Eric Added for SPI burst operations
void reg_wizchip_spiburst_cbfunc(void (*spi_rb)(uint8_t* pBuf, uint16_t len), void (*spi_wb)(uint8_t* pBuf, uint16_t len))
{
while(!(WIZCHIP.if_mode & _WIZCHIP_IO_MODE_SPI_));
if(!spi_rb || !spi_wb)
{
WIZCHIP.IF.SPI._read_burst = wizchip_spi_readburst;
WIZCHIP.IF.SPI._write_burst = wizchip_spi_writeburst;
}
else
{
WIZCHIP.IF.SPI._read_burst = spi_rb;
WIZCHIP.IF.SPI._write_burst = spi_wb;
}
}
int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg)
{
#if _WIZCHIP_ == W5100S || _WIZCHIP_ == W5200 || _WIZCHIP_ == W5500
uint8_t tmp = 0;
#endif
uint8_t* ptmp[2] = {0,0};
switch(cwtype)
{
case CW_RESET_WIZCHIP:
wizchip_sw_reset();
break;
case CW_INIT_WIZCHIP:
if(arg != 0)
{
ptmp[0] = (uint8_t*)arg;
ptmp[1] = ptmp[0] + _WIZCHIP_SOCK_NUM_;
}
return wizchip_init(ptmp[0], ptmp[1]);
case CW_CLR_INTERRUPT:
wizchip_clrinterrupt(*((intr_kind*)arg));
break;
case CW_GET_INTERRUPT:
*((intr_kind*)arg) = wizchip_getinterrupt();
break;
case CW_SET_INTRMASK:
wizchip_setinterruptmask(*((intr_kind*)arg));
break;
case CW_GET_INTRMASK:
*((intr_kind*)arg) = wizchip_getinterruptmask();
break;
//M20150601 : This can be supported by W5200, W5500
//#if _WIZCHIP_ > W5100
#if (_WIZCHIP_ == W5200 || _WIZCHIP_ == W5500)
case CW_SET_INTRTIME:
setINTLEVEL(*(uint16_t*)arg);
break;
case CW_GET_INTRTIME:
*(uint16_t*)arg = getINTLEVEL();
break;
#endif
case CW_GET_ID:
((uint8_t*)arg)[0] = WIZCHIP.id[0];
((uint8_t*)arg)[1] = WIZCHIP.id[1];
((uint8_t*)arg)[2] = WIZCHIP.id[2];
((uint8_t*)arg)[3] = WIZCHIP.id[3];
((uint8_t*)arg)[4] = WIZCHIP.id[4];
((uint8_t*)arg)[5] = 0;
break;
#if _WIZCHIP_ == W5100S || _WIZCHIP_ == W5500
case CW_RESET_PHY:
wizphy_reset();
break;
case CW_SET_PHYCONF:
wizphy_setphyconf((wiz_PhyConf*)arg);
break;
case CW_GET_PHYCONF:
wizphy_getphyconf((wiz_PhyConf*)arg);
break;
case CW_GET_PHYSTATUS:
break;
case CW_SET_PHYPOWMODE:
return wizphy_setphypmode(*(uint8_t*)arg);
#endif
#if _WIZCHIP_ == W5100S || _WIZCHIP_ == W5200 || _WIZCHIP_ == W5500
case CW_GET_PHYPOWMODE:
tmp = wizphy_getphypmode();
if((int8_t)tmp == -1) return -1;
*(uint8_t*)arg = tmp;
break;
case CW_GET_PHYLINK:
tmp = wizphy_getphylink();
if((int8_t)tmp == -1) return -1;
*(uint8_t*)arg = tmp;
break;
#endif
default:
return -1;
}
return 0;
}
int8_t ctlnetwork(ctlnetwork_type cntype, void* arg)
{
switch(cntype)
{
case CN_SET_NETINFO:
wizchip_setnetinfo((wiz_NetInfo*)arg);
break;
case CN_GET_NETINFO:
wizchip_getnetinfo((wiz_NetInfo*)arg);
break;
case CN_SET_NETMODE:
return wizchip_setnetmode(*(netmode_type*)arg);
case CN_GET_NETMODE:
*(netmode_type*)arg = wizchip_getnetmode();
break;
case CN_SET_TIMEOUT:
wizchip_settimeout((wiz_NetTimeout*)arg);
break;
case CN_GET_TIMEOUT:
wizchip_gettimeout((wiz_NetTimeout*)arg);
break;
default:
return -1;
}
return 0;
}
void wizchip_sw_reset(void)
{
uint8_t gw[4], sn[4], sip[4];
uint8_t mac[6];
//A20150601
#if _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_
uint16_t mr = (uint16_t)getMR();
setMR(mr | MR_IND);
#endif
//
getSHAR(mac);
getGAR(gw); getSUBR(sn); getSIPR(sip);
setMR(MR_RST);
getMR(); // for delay
//A2015051 : For indirect bus mode
#if _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_
setMR(mr | MR_IND);
#endif
//
setSHAR(mac);
setGAR(gw);
setSUBR(sn);
setSIPR(sip);
}
int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize)
{
int8_t i;
#if _WIZCHIP_ < W5200
int8_t j;
#endif
int8_t tmp = 0;
wizchip_sw_reset();
if(txsize)
{
tmp = 0;
//M20150601 : For integrating with W5300
#if _WIZCHIP_ == W5300
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
if(txsize[i] >= 64) return -1; //No use 64KB even if W5300 support max 64KB memory allocation
tmp += txsize[i];
if(tmp > 128) return -1;
}
if(tmp % 8) return -1;
#else
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
tmp += txsize[i];
#if _WIZCHIP_ < W5200 //2016.10.28 peter add condition for w5100 and w5100s
if(tmp > 8) return -1;
#else
if(tmp > 16) return -1;
#endif
}
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
#if _WIZCHIP_ < W5200 //2016.10.28 peter add condition for w5100
j = 0;
while((txsize[i] >> j != 1)&&(txsize[i] !=0)){j++;}
setSn_TXBUF_SIZE(i, j);
#else
setSn_TXBUF_SIZE(i, txsize[i]);
#endif
}
#endif
}
if(rxsize)
{
tmp = 0;
#if _WIZCHIP_ == W5300
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
if(rxsize[i] >= 64) return -1; //No use 64KB even if W5300 support max 64KB memory allocation
tmp += rxsize[i];
if(tmp > 128) return -1;
}
if(tmp % 8) return -1;
#else
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
tmp += rxsize[i];
#if _WIZCHIP_ < W5200 //2016.10.28 peter add condition for w5100 and w5100s
if(tmp > 8) return -1;
#else
if(tmp > 16) return -1;
#endif
}
for(i = 0 ; i < _WIZCHIP_SOCK_NUM_; i++)
{
#if _WIZCHIP_ < W5200 // add condition for w5100
j = 0;
while((rxsize[i] >> j != 1)&&(txsize[i] !=0)){j++;}
setSn_RXBUF_SIZE(i, j);
#else
setSn_RXBUF_SIZE(i, rxsize[i]);
#endif
}
#endif
}
return 0;
}
void wizchip_clrinterrupt(intr_kind intr)
{
uint8_t ir = (uint8_t)intr;
uint8_t sir = (uint8_t)((uint16_t)intr >> 8);
#if _WIZCHIP_ < W5500
ir |= (1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == W5200
ir |= (1 << 6);
#endif
#if _WIZCHIP_ < W5200
sir &= 0x0F;
#endif
#if _WIZCHIP_ <= W5100S
ir |= sir;
setIR(ir);
//A20150601 : For integrating with W5300
#elif _WIZCHIP_ == W5300
setIR( ((((uint16_t)ir) << 8) | (((uint16_t)sir) & 0x00FF)) );
#else
setIR(ir);
setSIR(sir);
#endif
}
intr_kind wizchip_getinterrupt(void)
{
uint8_t ir = 0;
uint8_t sir = 0;
uint16_t ret = 0;
#if _WIZCHIP_ <= W5100S
ir = getIR();
sir = ir & 0x0F;
//A20150601 : For integrating with W5300
#elif _WIZCHIP_ == W5300
ret = getIR();
ir = (uint8_t)(ret >> 8);
sir = (uint8_t)ret;
#else
ir = getIR();
sir = getSIR();
#endif
//M20150601 : For Integrating with W5300
//#if _WIZCHIP_ < W5500
#if _WIZCHIP_ < W5200
ir &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == W5200
ir &= ~(1 << 6);
#endif
ret = sir;
ret = (ret << 8) + ir;
return (intr_kind)ret;
}
void wizchip_setinterruptmask(intr_kind intr)
{
uint8_t imr = (uint8_t)intr;
uint8_t simr = (uint8_t)((uint16_t)intr >> 8);
#if _WIZCHIP_ < W5500
imr &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == W5200
imr &= ~(1 << 6);
#endif
#if _WIZCHIP_ < W5200
simr &= 0x0F;
imr |= simr;
setIMR(imr);
//A20150601 : For integrating with W5300
#elif _WIZCHIP_ == W5300
setIMR( ((((uint16_t)imr) << 8) | (((uint16_t)simr) & 0x00FF)) );
#else
setIMR(imr);
setSIMR(simr);
#endif
}
intr_kind wizchip_getinterruptmask(void)
{
uint8_t imr = 0;
uint8_t simr = 0;
uint16_t ret = 0;
#if _WIZCHIP_ < W5200
imr = getIMR();
simr = imr & 0x0F;
//A20150601 : For integrating with W5300
#elif _WIZCHIP_ == W5300
ret = getIMR();
imr = (uint8_t)(ret >> 8);
simr = (uint8_t)ret;
#else
imr = getIMR();
simr = getSIMR();
#endif
#if _WIZCHIP_ < W5500
imr &= ~(1<<4); // IK_WOL
#endif
#if _WIZCHIP_ == W5200
imr &= ~(1 << 6); // IK_DEST_UNREACH
#endif
ret = simr;
ret = (ret << 8) + imr;
return (intr_kind)ret;
}
int8_t wizphy_getphylink(void)
{
int8_t tmp = PHY_LINK_OFF;
#if _WIZCHIP_ == W5100S
if(getPHYSR() & PHYSR_LNK)
tmp = PHY_LINK_ON;
#elif _WIZCHIP_ == W5200
if(getPHYSTATUS() & PHYSTATUS_LINK)
tmp = PHY_LINK_ON;
#elif _WIZCHIP_ == W5500
if(getPHYCFGR() & PHYCFGR_LNK_ON)
tmp = PHY_LINK_ON;
#else
tmp = -1;
#endif
return tmp;
}
#if _WIZCHIP_ > W5100
int8_t wizphy_getphypmode(void)
{
int8_t tmp = 0;
#if _WIZCHIP_ == W5200
if(getPHYSTATUS() & PHYSTATUS_POWERDOWN)
tmp = PHY_POWER_DOWN;
else
tmp = PHY_POWER_NORM;
#elif _WIZCHIP_ == 5500
if((getPHYCFGR() & PHYCFGR_OPMDC_ALLA) == PHYCFGR_OPMDC_PDOWN)
tmp = PHY_POWER_DOWN;
else
tmp = PHY_POWER_NORM;
#else
tmp = -1;
#endif
return tmp;
}
#endif
#if _WIZCHIP_ == W5100S
void wizphy_reset(void)
{
uint16_t tmp = wiz_mdio_read(PHYMDIO_BMCR);
tmp |= BMCR_RESET;
wiz_mdio_write(PHYMDIO_BMCR, tmp);
while(wiz_mdio_read(PHYMDIO_BMCR)&BMCR_RESET){}
}
void wizphy_setphyconf(wiz_PhyConf* phyconf)
{
uint16_t tmp = wiz_mdio_read(PHYMDIO_BMCR);
if(phyconf->mode == PHY_MODE_AUTONEGO)
tmp |= BMCR_AUTONEGO;
else
{
tmp &= ~BMCR_AUTONEGO;
if(phyconf->duplex == PHY_DUPLEX_FULL)
{
tmp |= BMCR_DUP;
}
else
{
tmp &= ~BMCR_DUP;
}
if(phyconf->speed == PHY_SPEED_100)
{
tmp |= BMCR_SPEED;
}
else
{
tmp &= ~BMCR_SPEED;
}
}
wiz_mdio_write(PHYMDIO_BMCR, tmp);
}
void wizphy_getphyconf(wiz_PhyConf* phyconf)
{
uint16_t tmp = 0;
tmp = wiz_mdio_read(PHYMDIO_BMCR);
phyconf->by = PHY_CONFBY_SW;
if(tmp & BMCR_AUTONEGO)
{
phyconf->mode = PHY_MODE_AUTONEGO;
}
else
{
phyconf->mode = PHY_MODE_MANUAL;
if(tmp&BMCR_DUP) phyconf->duplex = PHY_DUPLEX_FULL;
else phyconf->duplex = PHY_DUPLEX_HALF;
if(tmp&BMCR_SPEED) phyconf->speed = PHY_SPEED_100;
else phyconf->speed = PHY_SPEED_10;
}
}
int8_t wizphy_setphypmode(uint8_t pmode)
{
uint16_t tmp = 0;
tmp = wiz_mdio_read(PHYMDIO_BMCR);
if( pmode == PHY_POWER_DOWN)
{
tmp |= BMCR_PWDN;
}
else
{
tmp &= ~BMCR_PWDN;
}
wiz_mdio_write(PHYMDIO_BMCR, tmp);
tmp = wiz_mdio_read(PHYMDIO_BMCR);
if( pmode == PHY_POWER_DOWN)
{
if(tmp & BMCR_PWDN) return 0;
}
else
{
if((tmp & BMCR_PWDN) != BMCR_PWDN) return 0;
}
return -1;
}
#endif
#if _WIZCHIP_ == W5500
void wizphy_reset(void)
{
uint8_t tmp = getPHYCFGR();
tmp &= PHYCFGR_RST;
setPHYCFGR(tmp);
tmp = getPHYCFGR();
tmp |= ~PHYCFGR_RST;
setPHYCFGR(tmp);
}
void wizphy_setphyconf(wiz_PhyConf* phyconf)
{
uint8_t tmp = 0;
if(phyconf->by == PHY_CONFBY_SW)
tmp |= PHYCFGR_OPMD;
else
tmp &= ~PHYCFGR_OPMD;
if(phyconf->mode == PHY_MODE_AUTONEGO)
tmp |= PHYCFGR_OPMDC_ALLA;
else
{
if(phyconf->duplex == PHY_DUPLEX_FULL)
{
if(phyconf->speed == PHY_SPEED_100)
tmp |= PHYCFGR_OPMDC_100F;
else
tmp |= PHYCFGR_OPMDC_10F;
}
else
{
if(phyconf->speed == PHY_SPEED_100)
tmp |= PHYCFGR_OPMDC_100H;
else
tmp |= PHYCFGR_OPMDC_10H;
}
}
setPHYCFGR(tmp);
wizphy_reset();
}
void wizphy_getphyconf(wiz_PhyConf* phyconf)
{
uint8_t tmp = 0;
tmp = getPHYCFGR();
phyconf->by = (tmp & PHYCFGR_OPMD) ? PHY_CONFBY_SW : PHY_CONFBY_HW;
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_ALLA:
case PHYCFGR_OPMDC_100FA:
phyconf->mode = PHY_MODE_AUTONEGO;
break;
default:
phyconf->mode = PHY_MODE_MANUAL;
break;
}
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_100FA:
case PHYCFGR_OPMDC_100F:
case PHYCFGR_OPMDC_100H:
phyconf->speed = PHY_SPEED_100;
break;
default:
phyconf->speed = PHY_SPEED_10;
break;
}
switch(tmp & PHYCFGR_OPMDC_ALLA)
{
case PHYCFGR_OPMDC_100FA:
case PHYCFGR_OPMDC_100F:
case PHYCFGR_OPMDC_10F:
phyconf->duplex = PHY_DUPLEX_FULL;
break;
default:
phyconf->duplex = PHY_DUPLEX_HALF;
break;
}
}
void wizphy_getphystat(wiz_PhyConf* phyconf)
{
uint8_t tmp = getPHYCFGR();
phyconf->duplex = (tmp & PHYCFGR_DPX_FULL) ? PHY_DUPLEX_FULL : PHY_DUPLEX_HALF;
phyconf->speed = (tmp & PHYCFGR_SPD_100) ? PHY_SPEED_100 : PHY_SPEED_10;
}
int8_t wizphy_setphypmode(uint8_t pmode)
{
uint8_t tmp = 0;
tmp = getPHYCFGR();
if((tmp & PHYCFGR_OPMD)== 0) return -1;
tmp &= ~PHYCFGR_OPMDC_ALLA;
if( pmode == PHY_POWER_DOWN)
tmp |= PHYCFGR_OPMDC_PDOWN;
else
tmp |= PHYCFGR_OPMDC_ALLA;
setPHYCFGR(tmp);
wizphy_reset();
tmp = getPHYCFGR();
if( pmode == PHY_POWER_DOWN)
{
if(tmp & PHYCFGR_OPMDC_PDOWN) return 0;
}
else
{
if(tmp & PHYCFGR_OPMDC_ALLA) return 0;
}
return -1;
}
#endif
void wizchip_setnetinfo(wiz_NetInfo* pnetinfo)
{
setSHAR(pnetinfo->mac);
setGAR(pnetinfo->gw);
setSUBR(pnetinfo->sn);
setSIPR(pnetinfo->ip);
_DNS_[0] = pnetinfo->dns[0];
_DNS_[1] = pnetinfo->dns[1];
_DNS_[2] = pnetinfo->dns[2];
_DNS_[3] = pnetinfo->dns[3];
_DHCP_ = pnetinfo->dhcp;
}
void wizchip_getnetinfo(wiz_NetInfo* pnetinfo)
{
getSHAR(pnetinfo->mac);
getGAR(pnetinfo->gw);
getSUBR(pnetinfo->sn);
getSIPR(pnetinfo->ip);
pnetinfo->dns[0]= _DNS_[0];
pnetinfo->dns[1]= _DNS_[1];
pnetinfo->dns[2]= _DNS_[2];
pnetinfo->dns[3]= _DNS_[3];
pnetinfo->dhcp = _DHCP_;
}
int8_t wizchip_setnetmode(netmode_type netmode)
{
uint8_t tmp = 0;
#if _WIZCHIP_ != W5500
if(netmode & ~(NM_WAKEONLAN | NM_PPPOE | NM_PINGBLOCK)) return -1;
#else
if(netmode & ~(NM_WAKEONLAN | NM_PPPOE | NM_PINGBLOCK | NM_FORCEARP)) return -1;
#endif
tmp = getMR();
tmp |= (uint8_t)netmode;
setMR(tmp);
return 0;
}
netmode_type wizchip_getnetmode(void)
{
return (netmode_type) getMR();
}
void wizchip_settimeout(wiz_NetTimeout* nettime)
{
setRCR(nettime->retry_cnt);
setRTR(nettime->time_100us);
}
void wizchip_gettimeout(wiz_NetTimeout* nettime)
{
nettime->retry_cnt = getRCR();
nettime->time_100us = getRTR();
}

660
14_m1284p_WIZNET_FTPC_FATFS_v1.2/Ethernet/wizchip_conf.h Normal file
View File

@@ -0,0 +1,660 @@
//*****************************************************************************
//
//! \file wizchip_conf.h
//! \brief WIZCHIP Config Header File.
//! \version 1.0.0
//! \date 2013/10/21
//! \par Revision history
//! <2015/02/05> Notice
//! The version history is not updated after this point.
//! Download the latest version directly from GitHub. Please visit the our GitHub repository for ioLibrary.
//! >> https://github.com/Wiznet/ioLibrary_Driver
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
/**
* @defgroup extra_functions 2. WIZnet Extra Functions
*
* @brief These functions is optional function. It could be replaced at WIZCHIP I/O function because they were made by WIZCHIP I/O functions.
* @details There are functions of configuring WIZCHIP, network, interrupt, phy, network information and timer. \n
*
*/
#ifndef _WIZCHIP_CONF_H_
#define _WIZCHIP_CONF_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
/**
* @brief Select WIZCHIP.
* @todo You should select one, \b W5100, \b W5100S, \b W5200, \b W5300, \b W5500 or etc. \n\n
* ex> <code> #define \_WIZCHIP_ W5500 </code>
*/
#define W5100 5100
#define W5100S 5100+5
#define W5200 5200
#define W5300 5300
#define W5500 5500
#ifndef _WIZCHIP_
#define _WIZCHIP_ W5500 // W5100, W5100S, W5200, W5300, W5500
#endif
#define _WIZCHIP_IO_MODE_NONE_ 0x0000
#define _WIZCHIP_IO_MODE_BUS_ 0x0100 /**< Bus interface mode */
#define _WIZCHIP_IO_MODE_SPI_ 0x0200 /**< SPI interface mode */
//#define _WIZCHIP_IO_MODE_IIC_ 0x0400
//#define _WIZCHIP_IO_MODE_SDIO_ 0x0800
// Add to
//
#define _WIZCHIP_IO_MODE_BUS_DIR_ (_WIZCHIP_IO_MODE_BUS_ + 1) /**< BUS interface mode for direct */
#define _WIZCHIP_IO_MODE_BUS_INDIR_ (_WIZCHIP_IO_MODE_BUS_ + 2) /**< BUS interface mode for indirect */
#define _WIZCHIP_IO_MODE_SPI_VDM_ (_WIZCHIP_IO_MODE_SPI_ + 1) /**< SPI interface mode for variable length data*/
#define _WIZCHIP_IO_MODE_SPI_FDM_ (_WIZCHIP_IO_MODE_SPI_ + 2) /**< SPI interface mode for fixed length data mode*/
#define _WIZCHIP_IO_MODE_SPI_5500_ (_WIZCHIP_IO_MODE_SPI_ + 3) /**< SPI interface mode for fixed length data mode*/
#if (_WIZCHIP_ == W5100)
#define _WIZCHIP_ID_ "W5100\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ , @ref \_WIZCHIP_IO_MODE_BUS_DIR_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
*/
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_DIR_
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
//A20150601 : Define the unit of IO DATA.
typedef uint8_t iodata_t;
//A20150401 : Indclude W5100.h file
#include "W5100/w5100.h"
#elif (_WIZCHIP_ == W5100S)
#define _WIZCHIP_ID_ "W5100S\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ , @ref \_WIZCHIP_IO_MODE_BUS_DIR_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
*/
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_5500_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
//A20150601 : Define the unit of IO DATA.
typedef uint8_t iodata_t;
//A20150401 : Indclude W5100.h file
#include "W5100S/w5100s.h"
#elif (_WIZCHIP_ == W5200)
#define _WIZCHIP_ID_ "W5200\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ or @ref \ _WIZCHIP_IO_MODE_BUS_INDIR_
*/
#ifndef _WIZCHIP_IO_MODE_
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
#endif
//A20150601 : Define the unit of IO DATA.
typedef uint8_t iodata_t;
#include "W5200/w5200.h"
#elif (_WIZCHIP_ == W5500)
#define _WIZCHIP_ID_ "W5500\0"
/**
* @brief Define interface mode. \n
* @todo Should select interface mode as chip.
* - @ref \_WIZCHIP_IO_MODE_SPI_ \n
* -@ref \_WIZCHIP_IO_MODE_SPI_VDM_ : Valid only in @ref \_WIZCHIP_ == W5500 \n
* -@ref \_WIZCHIP_IO_MODE_SPI_FDM_ : Valid only in @ref \_WIZCHIP_ == W5500 \n
* - @ref \_WIZCHIP_IO_MODE_BUS_ \n
* - @ref \_WIZCHIP_IO_MODE_BUS_DIR_ \n
* - @ref \_WIZCHIP_IO_MODE_BUS_INDIR_ \n
* - Others will be defined in future. \n\n
* ex> <code> #define \_WIZCHIP_IO_MODE_ \_WIZCHIP_IO_MODE_SPI_VDM_ </code>
*
*/
#ifndef _WIZCHIP_IO_MODE_
//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_FDM_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_VDM_
#endif
//A20150601 : Define the unit of IO DATA.
typedef uint8_t iodata_t;
#include "W5500/w5500.h"
#elif ( _WIZCHIP_ == W5300)
#define _WIZCHIP_ID_ "W5300\0"
/**
* @brief Define interface mode.
* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ , @ref \_WIZCHIP_IO_MODE_BUS_DIR_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
*/
#ifndef _WIZCHIP_IO_MODE_
// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_DIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#endif
//A20150601 : Define the unit and bus width of IO DATA.
/**
* @brief Select the data width 8 or 16 bits.
* @todo you should select the bus width. Select one of 8 or 16.
*/
#ifndef _WIZCHIP_IO_BUS_WIDTH_
#define _WIZCHIP_IO_BUS_WIDTH_ 8 // 16
#endif
#if _WIZCHIP_IO_BUS_WIDTH_ == 8
typedef uint8_t iodata_t;
#elif _WIZCHIP_IO_BUS_WIDTH_ == 16
typedef uint16_t iodata_t;
#else
#error "Unknown _WIZCHIP_IO_BUS_WIDTH_. It should be 8 or 16."
#endif
//
#include "W5300/w5300.h"
#else
#error "Unknown defined _WIZCHIP_. You should define one of 5100, 5200, and 5500 !!!"
#endif
#ifndef _WIZCHIP_IO_MODE_
#error "Undefined _WIZCHIP_IO_MODE_. You should define it !!!"
#endif
/**
* @brief Define I/O base address when BUS IF mode.
* @todo Should re-define it to fit your system when BUS IF Mode (@ref \_WIZCHIP_IO_MODE_BUS_,
* @ref \_WIZCHIP_IO_MODE_BUS_DIR_, @ref \_WIZCHIP_IO_MODE_BUS_INDIR_). \n\n
* ex> <code> #define \_WIZCHIP_IO_BASE_ 0x00008000 </code>
*/
#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS_
#define _WIZCHIP_IO_BASE_ 0x60000000 // for 5100S IND
#elif _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_
#define _WIZCHIP_IO_BASE_ 0x00000000 // for 5100S SPI
#endif
#ifndef _WIZCHIP_IO_BASE_
#define _WIZCHIP_IO_BASE_ 0x00000000 // 0x8000
#endif
//M20150401 : Typing Error
//#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS
#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS_
#ifndef _WIZCHIP_IO_BASE_
#error "You should be define _WIZCHIP_IO_BASE to fit your system memory map."
#endif
#endif
#if _WIZCHIP_ >= W5200
#define _WIZCHIP_SOCK_NUM_ 8 ///< The count of independant socket of @b WIZCHIP
#else
#define _WIZCHIP_SOCK_NUM_ 4 ///< The count of independant socket of @b WIZCHIP
#endif
/********************************************************
* WIZCHIP BASIC IF functions for SPI, SDIO, I2C , ETC.
*********************************************************/
/**
* @ingroup DATA_TYPE
* @brief The set of callback functions for W5500:@ref WIZCHIP_IO_Functions W5200:@ref WIZCHIP_IO_Functions_W5200
*/
typedef struct __WIZCHIP
{
uint16_t if_mode; ///< host interface mode
uint8_t id[6]; ///< @b WIZCHIP ID such as @b 5100, @b 5200, @b 5500, and so on.
/**
* The set of critical section callback func.
*/
struct _CRIS
{
void (*_enter) (void); ///< crtical section enter
void (*_exit) (void); ///< critial section exit
}CRIS;
/**
* The set of @ref \_WIZCHIP_ select control callback func.
*/
struct _CS
{
void (*_select) (void); ///< @ref \_WIZCHIP_ selected
void (*_deselect)(void); ///< @ref \_WIZCHIP_ deselected
}CS;
/**
* The set of interface IO callback func.
*/
union _IF
{
/**
* For BUS interface IO
*/
//M20156501 : Modify the function name for integrating with W5300
//struct
//{
// uint8_t (*_read_byte) (uint32_t AddrSel);
// void (*_write_byte) (uint32_t AddrSel, uint8_t wb);
//}BUS;
struct
{
iodata_t (*_read_data) (uint32_t AddrSel);
void (*_write_data) (uint32_t AddrSel, iodata_t wb);
}BUS;
/**
* For SPI interface IO
*/
struct
{
uint8_t (*_read_byte) (void);
void (*_write_byte) (uint8_t wb);
void (*_read_burst) (uint8_t* pBuf, uint16_t len);
void (*_write_burst) (uint8_t* pBuf, uint16_t len);
}SPI;
// To be added
//
}IF;
}_WIZCHIP;
extern _WIZCHIP WIZCHIP;
/**
* @ingroup DATA_TYPE
* WIZCHIP control type enumration used in @ref ctlwizchip().
*/
typedef enum
{
CW_RESET_WIZCHIP, ///< Resets WIZCHIP by softly
CW_INIT_WIZCHIP, ///< Initializes to WIZCHIP with SOCKET buffer size 2 or 1 dimension array typed uint8_t.
CW_GET_INTERRUPT, ///< Get Interrupt status of WIZCHIP
CW_CLR_INTERRUPT, ///< Clears interrupt
CW_SET_INTRMASK, ///< Masks interrupt
CW_GET_INTRMASK, ///< Get interrupt mask
CW_SET_INTRTIME, ///< Set interval time between the current and next interrupt.
CW_GET_INTRTIME, ///< Set interval time between the current and next interrupt.
CW_GET_ID, ///< Gets WIZCHIP name.
//D20150601 : For no modification your application code
//#if _WIZCHIP_ == W5500
CW_RESET_PHY, ///< Resets internal PHY. Valid Only W5500
CW_SET_PHYCONF, ///< When PHY configured by internal register, PHY operation mode (Manual/Auto, 10/100, Half/Full). Valid Only W5000
CW_GET_PHYCONF, ///< Get PHY operation mode in internal register. Valid Only W5500
CW_GET_PHYSTATUS, ///< Get real PHY status on operating. Valid Only W5500
CW_SET_PHYPOWMODE, ///< Set PHY power mode as normal and down when PHYSTATUS.OPMD == 1. Valid Only W5500
//#endif
//D20150601 : For no modification your application code
//#if _WIZCHIP_ == W5200 || _WIZCHIP_ == W5500
CW_GET_PHYPOWMODE, ///< Get PHY Power mode as down or normal, Valid Only W5100, W5200
CW_GET_PHYLINK ///< Get PHY Link status, Valid Only W5100, W5200
//#endif
}ctlwizchip_type;
/**
* @ingroup DATA_TYPE
* Network control type enumration used in @ref ctlnetwork().
*/
typedef enum
{
CN_SET_NETINFO, ///< Set Network with @ref wiz_NetInfo
CN_GET_NETINFO, ///< Get Network with @ref wiz_NetInfo
CN_SET_NETMODE, ///< Set network mode as WOL, PPPoE, Ping Block, and Force ARP mode
CN_GET_NETMODE, ///< Get network mode as WOL, PPPoE, Ping Block, and Force ARP mode
CN_SET_TIMEOUT, ///< Set network timeout as retry count and time.
CN_GET_TIMEOUT, ///< Get network timeout as retry count and time.
}ctlnetwork_type;
/**
* @ingroup DATA_TYPE
* Interrupt kind when CW_SET_INTRRUPT, CW_GET_INTERRUPT, CW_SET_INTRMASK
* and CW_GET_INTRMASK is used in @ref ctlnetwork().
* It can be used with OR operation.
*/
typedef enum
{
#if _WIZCHIP_ == W5500
IK_WOL = (1 << 4), ///< Wake On Lan by receiving the magic packet. Valid in W500.
#elif _WIZCHIP_ == W5300
IK_FMTU = (1 << 4), ///< Received a ICMP message (Fragment MTU)
#endif
IK_PPPOE_TERMINATED = (1 << 5), ///< PPPoE Disconnected
#if _WIZCHIP_ != W5200
IK_DEST_UNREACH = (1 << 6), ///< Destination IP & Port Unreachable, No use in W5200
#endif
IK_IP_CONFLICT = (1 << 7), ///< IP conflict occurred
IK_SOCK_0 = (1 << 8), ///< Socket 0 interrupt
IK_SOCK_1 = (1 << 9), ///< Socket 1 interrupt
IK_SOCK_2 = (1 << 10), ///< Socket 2 interrupt
IK_SOCK_3 = (1 << 11), ///< Socket 3 interrupt
#if _WIZCHIP_ > W5100S
IK_SOCK_4 = (1 << 12), ///< Socket 4 interrupt, No use in 5100
IK_SOCK_5 = (1 << 13), ///< Socket 5 interrupt, No use in 5100
IK_SOCK_6 = (1 << 14), ///< Socket 6 interrupt, No use in 5100
IK_SOCK_7 = (1 << 15), ///< Socket 7 interrupt, No use in 5100
#endif
#if _WIZCHIP_ > W5100S
IK_SOCK_ALL = (0xFF << 8) ///< All Socket interrupt
#else
IK_SOCK_ALL = (0x0F << 8) ///< All Socket interrupt
#endif
}intr_kind;
#define PHY_CONFBY_HW 0 ///< Configured PHY operation mode by HW pin
#define PHY_CONFBY_SW 1 ///< Configured PHY operation mode by SW register
#define PHY_MODE_MANUAL 0 ///< Configured PHY operation mode with user setting.
#define PHY_MODE_AUTONEGO 1 ///< Configured PHY operation mode with auto-negotiation
#define PHY_SPEED_10 0 ///< Link Speed 10
#define PHY_SPEED_100 1 ///< Link Speed 100
#define PHY_DUPLEX_HALF 0 ///< Link Half-Duplex
#define PHY_DUPLEX_FULL 1 ///< Link Full-Duplex
#define PHY_LINK_OFF 0 ///< Link Off
#define PHY_LINK_ON 1 ///< Link On
#define PHY_POWER_NORM 0 ///< PHY power normal mode
#define PHY_POWER_DOWN 1 ///< PHY power down mode
#if _WIZCHIP_ == W5100S || _WIZCHIP_ == W5500
/**
* @ingroup DATA_TYPE
* It configures PHY configuration when CW_SET PHYCONF or CW_GET_PHYCONF in W5500,
* and it indicates the real PHY status configured by HW or SW in all WIZCHIP. \n
* Valid only in W5500.
*/
typedef struct wiz_PhyConf_t
{
uint8_t by; ///< set by @ref PHY_CONFBY_HW or @ref PHY_CONFBY_SW
uint8_t mode; ///< set by @ref PHY_MODE_MANUAL or @ref PHY_MODE_AUTONEGO
uint8_t speed; ///< set by @ref PHY_SPEED_10 or @ref PHY_SPEED_100
uint8_t duplex; ///< set by @ref PHY_DUPLEX_HALF @ref PHY_DUPLEX_FULL
//uint8_t power; ///< set by @ref PHY_POWER_NORM or @ref PHY_POWER_DOWN
//uint8_t link; ///< Valid only in CW_GET_PHYSTATUS. set by @ref PHY_LINK_ON or PHY_DUPLEX_OFF
}wiz_PhyConf;
#endif
/**
* @ingroup DATA_TYPE
* It used in setting dhcp_mode of @ref wiz_NetInfo.
*/
typedef enum
{
NETINFO_STATIC = 1, ///< Static IP configuration by manually.
NETINFO_DHCP ///< Dynamic IP configruation from a DHCP sever
}dhcp_mode;
/**
* @ingroup DATA_TYPE
* Network Information for WIZCHIP
*/
typedef struct wiz_NetInfo_t
{
uint8_t mac[6]; ///< Source Mac Address
uint8_t ip[4]; ///< Source IP Address
uint8_t sn[4]; ///< Subnet Mask
uint8_t gw[4]; ///< Gateway IP Address
uint8_t dns[4]; ///< DNS server IP Address
dhcp_mode dhcp; ///< 1 - Static, 2 - DHCP
}wiz_NetInfo;
/**
* @ingroup DATA_TYPE
* Network mode
*/
typedef enum
{
#if _WIZCHIP_ == W5500
NM_FORCEARP = (1<<1), ///< Force to APP send whenever udp data is sent. Valid only in W5500
#endif
NM_WAKEONLAN = (1<<5), ///< Wake On Lan
NM_PINGBLOCK = (1<<4), ///< Block ping-request
NM_PPPOE = (1<<3), ///< PPPoE mode
}netmode_type;
/**
* @ingroup DATA_TYPE
* Used in CN_SET_TIMEOUT or CN_GET_TIMEOUT of @ref ctlwizchip() for timeout configruation.
*/
typedef struct wiz_NetTimeout_t
{
uint8_t retry_cnt; ///< retry count
uint16_t time_100us; ///< time unit 100us
}wiz_NetTimeout;
/**
*@brief Registers call back function for critical section of I/O functions such as
*\ref WIZCHIP_READ, @ref WIZCHIP_WRITE, @ref WIZCHIP_READ_BUF and @ref WIZCHIP_WRITE_BUF.
*@param cris_en : callback function for critical section enter.
*@param cris_ex : callback function for critical section exit.
*@todo Describe @ref WIZCHIP_CRITICAL_ENTER and @ref WIZCHIP_CRITICAL_EXIT marco or register your functions.
*@note If you do not describe or register, default functions(@ref wizchip_cris_enter & @ref wizchip_cris_exit) is called.
*/
void reg_wizchip_cris_cbfunc(void(*cris_en)(void), void(*cris_ex)(void));
/**
*@brief Registers call back function for WIZCHIP select & deselect.
*@param cs_sel : callback function for WIZCHIP select
*@param cs_desel : callback fucntion for WIZCHIP deselect
*@todo Describe @ref wizchip_cs_select and @ref wizchip_cs_deselect function or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_cs_cbfunc(void(*cs_sel)(void), void(*cs_desel)(void));
/**
*@brief Registers call back function for bus interface.
*@param bus_rb : callback function to read byte data using system bus
*@param bus_wb : callback function to write byte data using system bus
*@todo Describe @ref wizchip_bus_readbyte and @ref wizchip_bus_writebyte function
*or register your functions.
*@note If you do not describe or register, null function is called.
*/
//M20150601 : For integrating with W5300
//void reg_wizchip_bus_cbfunc(uint8_t (*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, uint8_t wb));
void reg_wizchip_bus_cbfunc(iodata_t (*bus_rb)(uint32_t addr), void (*bus_wb)(uint32_t addr, iodata_t wb));
/**
*@brief Registers call back function for SPI interface.
*@param spi_rb : callback function to read byte using SPI
*@param spi_wb : callback function to write byte using SPI
*@todo Describe \ref wizchip_spi_readbyte and \ref wizchip_spi_writebyte function
*or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_spi_cbfunc(uint8_t (*spi_rb)(void), void (*spi_wb)(uint8_t wb));
/**
*@brief Registers call back function for SPI interface.
*@param spi_rb : callback function to burst read using SPI
*@param spi_wb : callback function to burst write using SPI
*@todo Describe \ref wizchip_spi_readbyte and \ref wizchip_spi_writebyte function
*or register your functions.
*@note If you do not describe or register, null function is called.
*/
void reg_wizchip_spiburst_cbfunc(void (*spi_rb)(uint8_t* pBuf, uint16_t len), void (*spi_wb)(uint8_t* pBuf, uint16_t len));
/**
* @ingroup extra_functions
* @brief Controls to the WIZCHIP.
* @details Resets WIZCHIP & internal PHY, Configures PHY mode, Monitor PHY(Link,Speed,Half/Full/Auto),
* controls interrupt & mask and so on.
* @param cwtype : Decides to the control type
* @param arg : arg type is dependent on cwtype.
* @return 0 : Success \n
* -1 : Fail because of invalid \ref ctlwizchip_type or unsupported \ref ctlwizchip_type in WIZCHIP
*/
int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg);
/**
* @ingroup extra_functions
* @brief Controls to network.
* @details Controls to network environment, mode, timeout and so on.
* @param cntype : Input. Decides to the control type
* @param arg : Inout. arg type is dependent on cntype.
* @return -1 : Fail because of invalid \ref ctlnetwork_type or unsupported \ref ctlnetwork_type in WIZCHIP \n
* 0 : Success
*/
int8_t ctlnetwork(ctlnetwork_type cntype, void* arg);
/*
* The following functions are implemented for internal use.
* but You can call these functions for code size reduction instead of ctlwizchip() and ctlnetwork().
*/
/**
* @ingroup extra_functions
* @brief Reset WIZCHIP by softly.
*/
void wizchip_sw_reset(void);
/**
* @ingroup extra_functions
* @brief Initializes WIZCHIP with socket buffer size
* @param txsize Socket tx buffer sizes. If null, initialized the default size 2KB.
* @param rxsize Socket rx buffer sizes. If null, initialized the default size 2KB.
* @return 0 : succcess \n
* -1 : fail. Invalid buffer size
*/
int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize);
/**
* @ingroup extra_functions
* @brief Clear Interrupt of WIZCHIP.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
void wizchip_clrinterrupt(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt of WIZCHIP.
* @return @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
intr_kind wizchip_getinterrupt(void);
/**
* @ingroup extra_functions
* @brief Mask or Unmask Interrupt of WIZCHIP.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
*/
void wizchip_setinterruptmask(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt mask of WIZCHIP.
* @return : The operated OR vaule of @ref intr_kind. It can type-cast to uint16_t.
*/
intr_kind wizchip_getinterruptmask(void);
//todo
#if _WIZCHIP_ > W5100
int8_t wizphy_getphylink(void); ///< get the link status of phy in WIZCHIP. No use in W5100
int8_t wizphy_getphypmode(void); ///< get the power mode of PHY in WIZCHIP. No use in W5100
#endif
#if _WIZCHIP_ == W5100S || _WIZCHIP_ == W5500
void wizphy_reset(void); ///< Reset phy. Vailid only in W5500
/**
* @ingroup extra_functions
* @brief Set the phy information for WIZCHIP without power mode
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_setphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get phy configuration information.
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_getphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get phy status.
* @param phyconf : @ref wiz_PhyConf
*/
void wizphy_getphystat(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief set the power mode of phy inside WIZCHIP. Refer to @ref PHYCFGR in W5500, @ref PHYSTATUS in W5200
* @param pmode Settig value of power down mode.
*/
int8_t wizphy_setphypmode(uint8_t pmode);
#endif
/**
* @ingroup extra_functions
* @brief Set the network information for WIZCHIP
* @param pnetinfo : @ref wizNetInfo
*/
void wizchip_setnetinfo(wiz_NetInfo* pnetinfo);
/**
* @ingroup extra_functions
* @brief Get the network information for WIZCHIP
* @param pnetinfo : @ref wizNetInfo
*/
void wizchip_getnetinfo(wiz_NetInfo* pnetinfo);
/**
* @ingroup extra_functions
* @brief Set the network mode such WOL, PPPoE, Ping Block, and etc.
* @param pnetinfo Value of network mode. Refer to @ref netmode_type.
*/
int8_t wizchip_setnetmode(netmode_type netmode);
/**
* @ingroup extra_functions
* @brief Get the network mode such WOL, PPPoE, Ping Block, and etc.
* @return Value of network mode. Refer to @ref netmode_type.
*/
netmode_type wizchip_getnetmode(void);
/**
* @ingroup extra_functions
* @brief Set retry time value(@ref _RTR_) and retry count(@ref _RCR_).
* @details @ref _RTR_ configures the retransmission timeout period and @ref _RCR_ configures the number of time of retransmission.
* @param nettime @ref _RTR_ value and @ref _RCR_ value. Refer to @ref wiz_NetTimeout.
*/
void wizchip_settimeout(wiz_NetTimeout* nettime);
/**
* @ingroup extra_functions
* @brief Get retry time value(@ref _RTR_) and retry count(@ref _RCR_).
* @details @ref _RTR_ configures the retransmission timeout period and @ref _RCR_ configures the number of time of retransmission.
* @param nettime @ref _RTR_ value and @ref _RCR_ value. Refer to @ref wiz_NetTimeout.
*/
void wizchip_gettimeout(wiz_NetTimeout* nettime);
#ifdef __cplusplus
}
#endif
#endif // _WIZCHIP_CONF_H_