You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
644 lines
19 KiB
C
644 lines
19 KiB
C
/*
|
|
* Slightly modified for M128 using
|
|
* maxx_ir 28.05.2015
|
|
*
|
|
* PS. SPI Speed (4/8Mhz on F_CPU=16Mhz) set-up at: <power_on()>
|
|
*/
|
|
/*-----------------------------------------------------------------------*/
|
|
/* MMCv3/SDv1/SDv2 (in SPI mode) control module */
|
|
/*-----------------------------------------------------------------------*/
|
|
/*
|
|
/ Copyright (C) 2014, ChaN, all right reserved.
|
|
/
|
|
/ * This software is a free software and there is NO WARRANTY.
|
|
/ * No restriction on use. You can use, modify and redistribute it for
|
|
/ personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
|
|
/ * Redistributions of source code must retain the above copyright notice.
|
|
/
|
|
/-------------------------------------------------------------------------*/
|
|
|
|
#include <avr/io.h>
|
|
#include "diskio.h"
|
|
|
|
|
|
/* Port controls (Platform dependent) */
|
|
|
|
//!! M128
|
|
//#define SCK 1 /* - Output: SPI Serial Clock (SCLK) - ATMEGA128 PORTB, PIN1 */
|
|
//#define MOSI 2 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA128 PORTB, PIN2 */
|
|
//#define MISO 3 /* - Input: SPI Master in - slave out (MISO) - ATMEGA128 PORTB, PIN3 */
|
|
//#define CSN 0 /*SPI - SS*/
|
|
//#define SD_CS 6 /* PB.6 Output as CS*/
|
|
|
|
//!! ATMEGA644/1284
|
|
#define SCK 7 /* - Output: SPI Serial Clock (SCLK) - ATMEGA644/1284 PORTB, PIN7 */
|
|
#define MOSI 5 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA644/1284 PORTB, PIN5 */
|
|
#define MISO 6 /* - Input: SPI Master in - slave out (MISO) - ATMEGA644/1284 PORTB, PIN6 */
|
|
#define CSN 4 /*SPI - SS*/
|
|
//#define SD_CS 2 /* PB.2 Output as CS*/
|
|
#define SD_CS 0 /* PB.0 Output as CS*/
|
|
|
|
|
|
#define CS_LOW() PORTB &= ~(1<<SD_CS) /* CS=low */
|
|
#define CS_HIGH() PORTB |= (1<<SD_CS) /* CS=high */
|
|
#define MMC_CD (1) /* Card detected. yes:true, no:false, default:true */
|
|
#define MMC_WP (0) /* Write protected. yes:true, no:false, default:false */
|
|
#define FCLK_SLOW() SPCR = ((1<<SPE) | (1<<MSTR) | (1<<SPR1)) /*SPCR = 0x52*/ /* Set slow clock (F_CPU / 64) */
|
|
#define FCLK_FAST() SPCR = ((1<<SPE) | (1<<MSTR)) /*SPCR = 0x50*/ /* Set fast clock (F_CPU / 4) */
|
|
|
|
|
|
/*--------------------------------------------------------------------------
|
|
|
|
Module Private Functions
|
|
|
|
---------------------------------------------------------------------------*/
|
|
|
|
/* Definitions for MMC/SDC command */
|
|
#define CMD0 (0) /* GO_IDLE_STATE */
|
|
#define CMD1 (1) /* SEND_OP_COND (MMC) */
|
|
#define ACMD41 (0x80+41) /* SEND_OP_COND (SDC) */
|
|
#define CMD8 (8) /* SEND_IF_COND */
|
|
#define CMD9 (9) /* SEND_CSD */
|
|
#define CMD10 (10) /* SEND_CID */
|
|
#define CMD12 (12) /* STOP_TRANSMISSION */
|
|
#define ACMD13 (0x80+13) /* SD_STATUS (SDC) */
|
|
#define CMD16 (16) /* SET_BLOCKLEN */
|
|
#define CMD17 (17) /* READ_SINGLE_BLOCK */
|
|
#define CMD18 (18) /* READ_MULTIPLE_BLOCK */
|
|
#define CMD23 (23) /* SET_BLOCK_COUNT (MMC) */
|
|
#define ACMD23 (0x80+23) /* SET_WR_BLK_ERASE_COUNT (SDC) */
|
|
#define CMD24 (24) /* WRITE_BLOCK */
|
|
#define CMD25 (25) /* WRITE_MULTIPLE_BLOCK */
|
|
#define CMD32 (32) /* ERASE_ER_BLK_START */
|
|
#define CMD33 (33) /* ERASE_ER_BLK_END */
|
|
#define CMD38 (38) /* ERASE */
|
|
#define CMD55 (55) /* APP_CMD */
|
|
#define CMD58 (58) /* READ_OCR */
|
|
|
|
|
|
static volatile
|
|
DSTATUS Stat = STA_NOINIT; /* Disk status */
|
|
|
|
static volatile
|
|
BYTE Timer1, Timer2; /* 100Hz decrement timer */
|
|
|
|
static
|
|
BYTE CardType; /* Card type flags */
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Power Control (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
/* When the target system does not support socket power control, there */
|
|
/* is nothing to do in these functions and chk_power always returns 1. */
|
|
|
|
static
|
|
void power_on (void)
|
|
{
|
|
|
|
// Chang init
|
|
//~ PORTB |= 0b01000101; /* Configure SCK/MOSI/CS/SS as output */
|
|
//~ DDRB |= 0b01000111;
|
|
//~
|
|
//~ SPCR = 0x52; /* Enable SPI function in mode 0 */
|
|
//~ //SPSR = 0x01; /* SPI 2x mode 8MHZ */
|
|
//~ SPSR = 0x00; /* SPI 2x mode off 4MHZ */
|
|
|
|
// My init (Contiki-style)
|
|
DDRB |= _BV(SD_CS); // CS to OUT && Disable
|
|
CS_HIGH();
|
|
|
|
/* Initalize ports for communication with SPI units. */
|
|
/* CSN=SS and must be output when master! */
|
|
DDRB |= _BV(MOSI) | _BV(SCK) | _BV(CSN);
|
|
PORTB |= _BV(MOSI) | _BV(SCK);
|
|
|
|
/* Enables SPI, selects "master", clock rate FCK / 2, and SPI mode 0 */
|
|
// SPI 8Mhz
|
|
/*
|
|
SPCR = _BV(SPE) | _BV(MSTR);
|
|
SPSR = _BV(SPI2X);
|
|
*/
|
|
|
|
/* Enables SPI, selects "master", clock rate FCK / 4, and SPI mode 0 */
|
|
// SPI 4Mhz
|
|
SPCR = _BV(SPE) | _BV(MSTR);
|
|
SPSR = 0x0;
|
|
|
|
}
|
|
|
|
static
|
|
void power_off (void)
|
|
{
|
|
|
|
//SPCR = 0;
|
|
/* Disable SPI function */
|
|
|
|
//DDRB &= ~0b00110111;
|
|
/* Set SCK/MOSI/CS as hi-z, INS#/WP as pull-up */
|
|
//PORTB &= ~0b00000111;
|
|
//PORTB |= 0b00110000;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Transmit/Receive data from/to MMC via SPI (Platform dependent) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
/* Exchange a byte */
|
|
static
|
|
BYTE xchg_spi ( /* Returns received data */
|
|
BYTE dat /* Data to be sent */
|
|
)
|
|
{
|
|
SPDR = dat;
|
|
loop_until_bit_is_set(SPSR, SPIF);
|
|
return SPDR;
|
|
}
|
|
|
|
/* Send a data block fast */
|
|
static
|
|
void xmit_spi_multi (
|
|
const BYTE *p, /* Data block to be sent */
|
|
UINT cnt /* Size of data block (must be multiple of 2) */
|
|
)
|
|
{
|
|
do {
|
|
SPDR = *p++; loop_until_bit_is_set(SPSR,SPIF);
|
|
SPDR = *p++; loop_until_bit_is_set(SPSR,SPIF);
|
|
} while (cnt -= 2);
|
|
}
|
|
|
|
/* Receive a data block fast */
|
|
static
|
|
void rcvr_spi_multi (
|
|
BYTE *p, /* Data buffer */
|
|
UINT cnt /* Size of data block (must be multiple of 2) */
|
|
)
|
|
{
|
|
do {
|
|
SPDR = 0xFF; loop_until_bit_is_set(SPSR,SPIF); *p++ = SPDR;
|
|
SPDR = 0xFF; loop_until_bit_is_set(SPSR,SPIF); *p++ = SPDR;
|
|
} while (cnt -= 2);
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Wait for card ready */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int wait_ready ( /* 1:Ready, 0:Timeout */
|
|
UINT wt /* Timeout [ms] */
|
|
)
|
|
{
|
|
BYTE d;
|
|
|
|
|
|
Timer2 = wt / 10;
|
|
do
|
|
d = xchg_spi(0xFF);
|
|
while (d != 0xFF && Timer2);
|
|
|
|
return (d == 0xFF) ? 1 : 0;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Deselect the card and release SPI bus */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
void deselect (void)
|
|
{
|
|
CS_HIGH(); /* Set CS# high */
|
|
xchg_spi(0xFF); /* Dummy clock (force DO hi-z for multiple slave SPI) */
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Select the card and wait for ready */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int select (void) /* 1:Successful, 0:Timeout */
|
|
{
|
|
CS_LOW(); /* Set CS# low */
|
|
xchg_spi(0xFF); /* Dummy clock (force DO enabled) */
|
|
if (wait_ready(500)) return 1; /* Wait for card ready */
|
|
|
|
deselect();
|
|
return 0; /* Timeout */
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Receive a data packet from MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
int rcvr_datablock (
|
|
BYTE *buff, /* Data buffer to store received data */
|
|
UINT btr /* Byte count (must be multiple of 4) */
|
|
)
|
|
{
|
|
BYTE token;
|
|
|
|
|
|
Timer1 = 20;
|
|
do { /* Wait for data packet in timeout of 200ms */
|
|
token = xchg_spi(0xFF);
|
|
} while ((token == 0xFF) && Timer1);
|
|
if (token != 0xFE) return 0; /* If not valid data token, retutn with error */
|
|
|
|
rcvr_spi_multi(buff, btr); /* Receive the data block into buffer */
|
|
xchg_spi(0xFF); /* Discard CRC */
|
|
xchg_spi(0xFF);
|
|
|
|
return 1; /* Return with success */
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Send a data packet to MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _USE_WRITE
|
|
static
|
|
int xmit_datablock (
|
|
const BYTE *buff, /* 512 byte data block to be transmitted */
|
|
BYTE token /* Data/Stop token */
|
|
)
|
|
{
|
|
BYTE resp;
|
|
|
|
|
|
if (!wait_ready(500)) return 0;
|
|
|
|
xchg_spi(token); /* Xmit data token */
|
|
if (token != 0xFD) { /* Is data token */
|
|
xmit_spi_multi(buff, 512); /* Xmit the data block to the MMC */
|
|
xchg_spi(0xFF); /* CRC (Dummy) */
|
|
xchg_spi(0xFF);
|
|
resp = xchg_spi(0xFF); /* Reveive data response */
|
|
if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Send a command packet to MMC */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static
|
|
BYTE send_cmd ( /* Returns R1 resp (bit7==1:Send failed) */
|
|
BYTE cmd, /* Command index */
|
|
DWORD arg /* Argument */
|
|
)
|
|
{
|
|
BYTE n, res;
|
|
|
|
|
|
if (cmd & 0x80) { /* ACMD<n> is the command sequense of CMD55-CMD<n> */
|
|
cmd &= 0x7F;
|
|
res = send_cmd(CMD55, 0);
|
|
if (res > 1) return res;
|
|
}
|
|
|
|
/* Select the card and wait for ready except to stop multiple block read */
|
|
if (cmd != CMD12) {
|
|
deselect();
|
|
if (!select()) return 0xFF;
|
|
}
|
|
|
|
/* Send command packet */
|
|
xchg_spi(0x40 | cmd); /* Start + Command index */
|
|
xchg_spi((BYTE)(arg >> 24)); /* Argument[31..24] */
|
|
xchg_spi((BYTE)(arg >> 16)); /* Argument[23..16] */
|
|
xchg_spi((BYTE)(arg >> 8)); /* Argument[15..8] */
|
|
xchg_spi((BYTE)arg); /* Argument[7..0] */
|
|
n = 0x01; /* Dummy CRC + Stop */
|
|
if (cmd == CMD0) n = 0x95; /* Valid CRC for CMD0(0) + Stop */
|
|
if (cmd == CMD8) n = 0x87; /* Valid CRC for CMD8(0x1AA) Stop */
|
|
xchg_spi(n);
|
|
|
|
/* Receive command response */
|
|
if (cmd == CMD12) xchg_spi(0xFF); /* Skip a stuff byte when stop reading */
|
|
n = 10; /* Wait for a valid response in timeout of 10 attempts */
|
|
do
|
|
res = xchg_spi(0xFF);
|
|
while ((res & 0x80) && --n);
|
|
|
|
return res; /* Return with the response value */
|
|
}
|
|
|
|
|
|
|
|
/*--------------------------------------------------------------------------
|
|
|
|
Public Functions
|
|
|
|
---------------------------------------------------------------------------*/
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Initialize Disk Drive */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DSTATUS disk_initialize (
|
|
BYTE pdrv /* Physical drive nmuber (0) */
|
|
)
|
|
{
|
|
BYTE n, cmd, ty, ocr[4];
|
|
|
|
|
|
if (pdrv) return STA_NOINIT; /* Supports only single drive */
|
|
power_off(); /* Turn off the socket power to reset the card */
|
|
if (Stat & STA_NODISK) return Stat; /* No card in the socket */
|
|
power_on(); /* Turn on the socket power */
|
|
FCLK_SLOW();
|
|
for (n = 10; n; n--) xchg_spi(0xFF); /* 80 dummy clocks */
|
|
|
|
ty = 0;
|
|
if (send_cmd(CMD0, 0) == 1) { /* Enter Idle state */
|
|
Timer1 = 100; /* Initialization timeout of 1000 msec */
|
|
if (send_cmd(CMD8, 0x1AA) == 1) { /* SDv2? */
|
|
for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF); /* Get trailing return value of R7 resp */
|
|
if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* The card can work at vdd range of 2.7-3.6V */
|
|
while (Timer1 && send_cmd(ACMD41, 1UL << 30)); /* Wait for leaving idle state (ACMD41 with HCS bit) */
|
|
if (Timer1 && send_cmd(CMD58, 0) == 0) { /* Check CCS bit in the OCR */
|
|
for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF);
|
|
ty = (ocr[0] & 0x40) ? CT_SD2 | CT_BLOCK : CT_SD2; /* SDv2 */
|
|
}
|
|
}
|
|
} else { /* SDv1 or MMCv3 */
|
|
if (send_cmd(ACMD41, 0) <= 1) {
|
|
ty = CT_SD1; cmd = ACMD41; /* SDv1 */
|
|
} else {
|
|
ty = CT_MMC; cmd = CMD1; /* MMCv3 */
|
|
}
|
|
while (Timer1 && send_cmd(cmd, 0)); /* Wait for leaving idle state */
|
|
if (!Timer1 || send_cmd(CMD16, 512) != 0) /* Set R/W block length to 512 */
|
|
ty = 0;
|
|
}
|
|
}
|
|
CardType = ty;
|
|
deselect();
|
|
|
|
if (ty) { /* Initialization succeded */
|
|
Stat &= ~STA_NOINIT; /* Clear STA_NOINIT */
|
|
FCLK_FAST();
|
|
} else { /* Initialization failed */
|
|
power_off();
|
|
}
|
|
|
|
return Stat;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Get Disk Status */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DSTATUS disk_status (
|
|
BYTE pdrv /* Physical drive nmuber (0) */
|
|
)
|
|
{
|
|
if (pdrv) return STA_NOINIT; /* Supports only single drive */
|
|
return Stat;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Read Sector(s) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
DRESULT disk_read (
|
|
BYTE pdrv, /* Physical drive nmuber (0) */
|
|
BYTE *buff, /* Pointer to the data buffer to store read data */
|
|
DWORD sector, /* Start sector number (LBA) */
|
|
UINT count /* Sector count (1..128) */
|
|
)
|
|
{
|
|
BYTE cmd;
|
|
|
|
|
|
if (pdrv || !count) return RES_PARERR;
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
|
|
if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
|
|
|
|
cmd = count > 1 ? CMD18 : CMD17; /* READ_MULTIPLE_BLOCK : READ_SINGLE_BLOCK */
|
|
if (send_cmd(cmd, sector) == 0) {
|
|
do {
|
|
if (!rcvr_datablock(buff, 512)) break;
|
|
buff += 512;
|
|
} while (--count);
|
|
if (cmd == CMD18) send_cmd(CMD12, 0); /* STOP_TRANSMISSION */
|
|
}
|
|
deselect();
|
|
|
|
return count ? RES_ERROR : RES_OK;
|
|
}
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Write Sector(s) */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _USE_WRITE
|
|
DRESULT disk_write (
|
|
BYTE pdrv, /* Physical drive nmuber (0) */
|
|
const BYTE *buff, /* Pointer to the data to be written */
|
|
DWORD sector, /* Start sector number (LBA) */
|
|
UINT count /* Sector count (1..128) */
|
|
)
|
|
{
|
|
if (pdrv || !count) return RES_PARERR;
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
if (Stat & STA_PROTECT) return RES_WRPRT;
|
|
|
|
if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
|
|
|
|
if (count == 1) { /* Single block write */
|
|
if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */
|
|
&& xmit_datablock(buff, 0xFE))
|
|
count = 0;
|
|
}
|
|
else { /* Multiple block write */
|
|
if (CardType & CT_SDC) send_cmd(ACMD23, count);
|
|
if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */
|
|
do {
|
|
if (!xmit_datablock(buff, 0xFC)) break;
|
|
buff += 512;
|
|
} while (--count);
|
|
if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */
|
|
count = 1;
|
|
}
|
|
}
|
|
deselect();
|
|
|
|
return count ? RES_ERROR : RES_OK;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Miscellaneous Functions */
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
#if _USE_IOCTL
|
|
DRESULT disk_ioctl (
|
|
BYTE pdrv, /* Physical drive nmuber (0) */
|
|
BYTE cmd, /* Control code */
|
|
void *buff /* Buffer to send/receive control data */
|
|
)
|
|
{
|
|
DRESULT res;
|
|
BYTE n, csd[16], *ptr = buff;
|
|
DWORD csize;
|
|
|
|
|
|
if (pdrv) return RES_PARERR;
|
|
|
|
res = RES_ERROR;
|
|
|
|
if (Stat & STA_NOINIT) return RES_NOTRDY;
|
|
|
|
switch (cmd) {
|
|
case CTRL_SYNC : /* Make sure that no pending write process. Do not remove this or written sector might not left updated. */
|
|
if (select()) res = RES_OK;
|
|
break;
|
|
|
|
case GET_SECTOR_COUNT : /* Get number of sectors on the disk (DWORD) */
|
|
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) {
|
|
if ((csd[0] >> 6) == 1) { /* SDC ver 2.00 */
|
|
csize = csd[9] + ((WORD)csd[8] << 8) + ((DWORD)(csd[7] & 63) << 16) + 1;
|
|
*(DWORD*)buff = csize << 10;
|
|
} else { /* SDC ver 1.XX or MMC*/
|
|
n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2;
|
|
csize = (csd[8] >> 6) + ((WORD)csd[7] << 2) + ((WORD)(csd[6] & 3) << 10) + 1;
|
|
*(DWORD*)buff = csize << (n - 9);
|
|
}
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case GET_BLOCK_SIZE : /* Get erase block size in unit of sector (DWORD) */
|
|
if (CardType & CT_SD2) { /* SDv2? */
|
|
if (send_cmd(ACMD13, 0) == 0) { /* Read SD status */
|
|
xchg_spi(0xFF);
|
|
if (rcvr_datablock(csd, 16)) { /* Read partial block */
|
|
for (n = 64 - 16; n; n--) xchg_spi(0xFF); /* Purge trailing data */
|
|
*(DWORD*)buff = 16UL << (csd[10] >> 4);
|
|
res = RES_OK;
|
|
}
|
|
}
|
|
} else { /* SDv1 or MMCv3 */
|
|
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { /* Read CSD */
|
|
if (CardType & CT_SD1) { /* SDv1 */
|
|
*(DWORD*)buff = (((csd[10] & 63) << 1) + ((WORD)(csd[11] & 128) >> 7) + 1) << ((csd[13] >> 6) - 1);
|
|
} else { /* MMCv3 */
|
|
*(DWORD*)buff = ((WORD)((csd[10] & 124) >> 2) + 1) * (((csd[11] & 3) << 3) + ((csd[11] & 224) >> 5) + 1);
|
|
}
|
|
res = RES_OK;
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* Following commands are never used by FatFs module */
|
|
|
|
case MMC_GET_TYPE : /* Get card type flags (1 byte) */
|
|
*ptr = CardType;
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_CSD : /* Receive CSD as a data block (16 bytes) */
|
|
if (send_cmd(CMD9, 0) == 0 /* READ_CSD */
|
|
&& rcvr_datablock(ptr, 16))
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_CID : /* Receive CID as a data block (16 bytes) */
|
|
if (send_cmd(CMD10, 0) == 0 /* READ_CID */
|
|
&& rcvr_datablock(ptr, 16))
|
|
res = RES_OK;
|
|
break;
|
|
|
|
case MMC_GET_OCR : /* Receive OCR as an R3 resp (4 bytes) */
|
|
if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */
|
|
for (n = 4; n; n--) *ptr++ = xchg_spi(0xFF);
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case MMC_GET_SDSTAT : /* Receive SD statsu as a data block (64 bytes) */
|
|
if (send_cmd(ACMD13, 0) == 0) { /* SD_STATUS */
|
|
xchg_spi(0xFF);
|
|
if (rcvr_datablock(ptr, 64))
|
|
res = RES_OK;
|
|
}
|
|
break;
|
|
|
|
case CTRL_POWER_OFF : /* Power off */
|
|
power_off();
|
|
Stat |= STA_NOINIT;
|
|
res = RES_OK;
|
|
break;
|
|
|
|
default:
|
|
res = RES_PARERR;
|
|
}
|
|
|
|
deselect();
|
|
|
|
return res;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Device Timer Interrupt Procedure */
|
|
/*-----------------------------------------------------------------------*/
|
|
/* This function must be called in period of 10ms */
|
|
|
|
void disk_timerproc (void)
|
|
{
|
|
BYTE n, s;
|
|
|
|
|
|
n = Timer1; /* 100Hz decrement timer */
|
|
if (n) Timer1 = --n;
|
|
n = Timer2;
|
|
if (n) Timer2 = --n;
|
|
|
|
s = Stat;
|
|
|
|
if (MMC_WP) /* Write protected */
|
|
s |= STA_PROTECT;
|
|
else /* Write enabled */
|
|
s &= ~STA_PROTECT;
|
|
|
|
if (MMC_CD) /* Card inserted */
|
|
s &= ~STA_NODISK;
|
|
else /* Socket empty */
|
|
s |= (STA_NODISK | STA_NOINIT);
|
|
|
|
Stat = s; /* Update MMC status */
|
|
}
|