update LED in readme

README.md

@@ -0,0 +1,85 @@
+# Wägetransmitter Modbus
+
+Ein Steuergerät zum Auslesen einer Wägezelle, angebunden über Modbus RTU.
+Die Wandlung des analogen Wägezellen-Signals basiert auf dem HX711 IC;
+auf einem Atmel AVR (ATmega328p) ist der Modbus-Slave implementiert.
+
+|![3D Model](board/pics/3d-board.png)|![eingebaut](board/pics/picture.png)|
+|:---:|:---:|
+
+### Schnittstellenparameter RS485/Modbus RTU
+
+| Parameter      | Wert   |
+|----------------|--------|
+| Baudrate       | 115200 |
+| Datenbits      | 8      |
+| Parität        | none   |
+| Stopbits       | 1      |
+| Modbus Adresse | 1      |
+
+Das Gerät stellt den 24-bit ADC Wert in 2er-Komplement Darstellung über zwei
+Holding-Register bereit. Somit ergibt sich ein 32-bit signed Integer Datentyp.
+
+| Register Adresse | Wert      |
+|------------------|-----------|
+| 0                | ADC[0:15] |
+| 1                | 8xADC[23],ADC[22:16]|
+
+#### Beispiel:
+Abfragen des Wertes mit dem Tool modpoll (https://www.modbusdriver.com/modpoll.html)
+```
+user@pc:~$ modpoll -b 115200 -p none -t4:int /dev/ttyUSB0
+modpoll 3.10 - FieldTalk(tm) Modbus(R) Master Simulator
+Copyright (c) 2002-2021 proconX Pty Ltd
+Visit https://www.modbusdriver.com for Modbus libraries and tools.
+
+Protocol configuration: Modbus RTU, FC3
+Slave configuration...: address = 1, start reference = 1, count = 1
+Communication.........: /dev/ttyUSB0, 115200, 8, 1, none, t/o 1.00 s, poll rate 100 ms
+Data type.............: 32-bit integer, output (holding) register table
+
+-- Polling slave... (Ctrl-C to stop)
+[1]: -242457
+-- Polling slave... (Ctrl-C to stop)
+[1]: -242440
+```
+
+### HX711
+
+Über den Jumper `JP1` kann eine Samplerate von 10Hz oder 80Hz gewählt werden.
+
+### LEDs
+
+| LED | Signal |
+|-----|--------|
+| D1  | Bus Error |
+| D2  | Bus Transmission       |
+| D3  | 5V Rail    |
+
+### Klemmenbelegung
+![fab](board/pics/board-fab.svg)
+
+#### J1
+| Klemme | Signal                         |
+|--------|--------------------------------|
+| 24V    | Spannungsversorgung 9V bis 24V |
+| GND    | Masse (Bus und Versorgung)     |
+| A+ / B-| RS485 Bus Leitungen            |
+| LEDn+  | Externe LED Anode (selbes Signal, wie intern)|
+| LEDn-  | Externe LED Kathode            |
+
+#### J4
+| Klemme | Signal                         |
+|--------|--------------------------------|
+| E+     | Spannungsversorgung Wägezelle  |
+| E-     | Masse                          |
+| INA-   | Messsignal 1                   |
+| INA+   | Messsignal 2                   |
+
+### Schaltplan
+![schematic](board/pics/schematic.svg)
+
+### Mechanische Dimensionen
+![dimensions](board/pics/board.svg)
+
+

code/Builds/main.hex

@@ -1,120 +0,0 @@
-:100000000C9434000C9451000C9451000C94510049
-:100010000C9451000C9451000C9451000C9451001C
-:100020000C9451000C9451000C9451000C9451000C
-:100030000C9451000C9451000C9451000C945100FC
-:100040000C9488030C9451000C9419010C948901B0
-:100050000C94CB010C9451000C9451000C94510061
-:100060000C9451000C94510011241FBECFEFD8E026
-:10007000DEBFCDBF11E0A0E0B1E0ECE5F7E002C0EB
-:1000800005900D92A230B107D9F722E0A2E0B1E0CD
-:1000900001C01D92A431B207E1F70E9473030C94D2
-:1000A000AC030C94000080910F0120910E0190E0B0
-:1000B000922B909304018093030180910D0186306F
-:1000C00079F080910D01853059F0809111012091D6
-:1000D000100190E0922B9093060180930501089502
-:1000E00081E090E09093060180930501089580914E
-:1000F0000B010895809302010895CF93DF93EC01E3
-:100100006F5F09F43EC0FC01A62FB0E0BC016A0F8E
-:100110007B1F2FEF3FEF9081292798E0A9014170C5
-:10012000552736952795452B21F081E0282780EA31
-:100130003827915099F73196E617F70761F7A9012B
-:100140005527632F7727FE01EA0FFB1F808190E080
-:100150004817590749F01196AC0FBD1F20836C93C7
-:1001600080E0DF91CF910895AD014F5F5F4FDE01D9
-:10017000A40FB51F8C9190E08617970779F781E05F
-:10018000F0CF6FEF70E04FEF50E02FEF3FEFA0E0C8
-:10019000B0E0D9CF80910B0185FF19C08091090192
-:1001A00090910A01019690930A0180930901809130
-:1001B0000B0181FF0DC08091090190910A01079701
-:1001C00009F18091090190910A01429769F008951F
-:1001D0008091090190910A014097C9F780910B0124
-:1001E000816080930B01089590910C018091020130
-:1001F000981771F080E280930B0110920A0110921F
-:100200000901089580910B01806480930B0108958A
-:10021000609107017091080163508CE091E00E94A9
-:100220007D00882339F30E94530088E080930B01FE
-:1002300008951F920F920FB60F9211242F933F93A0
-:100240008F939F93EF93FF939091C60010920A01B2
-:100250001092090180910B0183FD04C080910B0174
-:1002600084FF2AC080910B0183FD1BC080910B018C
-:1002700084FD17C080910B0182FD13C080910B019A
-:1002800081FD0FC080910B0180FF0BC090930C018A
-:1002900082E280930B0181E090E0909308018093CB
-:1002A0000701FF91EF919F918F913F912F910F90B7
-:1002B0000FBE0F901F90189580910B0182FDD2CF39
-:1002C00080910B0181FFCECF80910B0180FDCACFC1
-:1002D00020910701309108012F3F310549F040F08E
-:1002E00080E280930B0110920A0110920901D9CF8C
-:1002F000E0910701F0910801E45FFE4F9083809147
-:1003000007019091080101969093080180930701DD
-:10031000C8CF1F920F920FB60F9211242F933F93C5
-:100320008F939F93EF93FF9380910B018F7E809328
-:100330000B0180910B01846080930B01E091070118
-:10034000F0910801E45FFE4F80818093C6008091A8
-:10035000070190910801019690930801809307018D
-:1003600080910001209107013091080190E00196F1
-:100370008217930729F48091C1008F7D8093C1007B
-:10038000FF91EF919F918F913F912F910F900FBE11
-:100390000F901F9018951F920F920FB60F92112475
-:1003A0008F935A9880E280930B0110920A01109269
-:1003B00009018F910F900FBE0F901F90189510920A
-:1003C000C5008BE38093C40082E08093C00086E088
-:1003D0008093C20088ED8093C100529A5A9880E2BF
-:1003E00080930B01089592E0980F90930001682F7D
-:1003F0008CE091E00E947D0080910B0180618093F0
-:100400000B0110920801109207015A9AE1ECF0E0FA
-:1004100080818062808380910B01877F80930B01B4
-:100420000895ECE0F1E0918190689183828382E00D
-:100430000C94F301CF93DF932091030130910401D9
-:100440002617370778F1E0910501F0910601209118
-:10045000030130910401460F571F2E0F3F1F421713
-:10046000530700F120910D01233059F120910D0126
-:10047000243039F120910D01203139F020910D0106
-:10048000263009F459C080E019C040911201209132
-:1004900005013091060150E0220F331F4217530728
-:1004A00008F065C080910D01806880930D0183E0A4
-:1004B00080930E0182E00E94F30180E0DF91CF91F2
-:1004C00008952091050130910601220F331F2C3F22
-:1004D000310540F72091050130910601220F20934C
-:1004E0000E012091050130910601422F2091030158
-:1004F00030910401261B370B220F331F442399F040
-:10050000DC01A20FB31FE0E1F1E080E0EF012197F1
-:100510002D913C91119738832D913D9120838F5FD0
-:1005200032964813F3CF80910E018E5F0E94F30143
-:1005300081E0DF91CF910895A0910301B091040172
-:10054000A61BB70BAA0FBB1FA80FB91F80911001E4
-:100550002091110190E0982F8827820F911D11960C
-:100560009C938E9385E00E94F30181E0A7CF409198
-:10057000070150910801209112014950510930E0C2
-:100580004217530708F48ECF2091050130910601E0
-:10059000422FA0910301B0910401A61BB70BAA0F33
-:1005A000BB1F2223F9F2E4E1F1E0A80FB91F90E0AC
-:1005B000EF0121972881808130E0322F2227280FF8
-:1005C000311D11963C932E9312969F5F32964913DC
-:1005D000EFCFC8CFCF92DF92EF92FF9221E030E0D1
-:1005E000F90102C0EE0FFF1F8A95E2F7CF017E2FBF
-:1005F000E62F682F609558E180E090E0DC0125B19E
-:10060000272B25B926E02A95F1F700006C017D0122
-:10061000CC0CDD1CEE1CFF1C23B130E00E2E02C002
-:10062000359527950A94E2F7C90181709927092E1B
-:10063000000CAA0BBB0B8C299D29AE29BF2925B123
-:10064000262325B926E02A95F1F700005150B9F686
-:10065000403229F1403401F5E3E0F0E030E025B12B
-:10066000272B25B926E02A95F1F7000025B126238E
-:1006700025B926E02A95F1F700003F5F432F50E0AF
-:100680004E175F0764F3A7FDBF6FBC01CD01FF905C
-:10069000EF90DF90CF900895E1E0F0E0DFCFE2E06F
-:1006A000F0E0DCCF0E94770083FF1CC080910D0139
-:1006B000833019F081E00C941102419A40E864E023
-:1006C0000E94EA0270930D0260930C0290930F0255
-:1006D00080930E0244E050E060E070E08CE092E035
-:1006E0000C941A02089587B1836087B9239A81E038
-:1006F0000E947A000E94DF01789485B5826085BDF2
-:1007000080916E00816080936E000E945203FDCF45
-:100710001F920F920FB60F9211242F933F934F9376
-:100720005F936F937F938F939F93AF93BF93EF9359
-:10073000FF930E94CA00FF91EF91BF91AF919F91EB
-:100740008F917F916F915F914F913F912F910F907A
-:0C0750000FBE0F901F901895F894FFCF7B
-:02075C00070094
-:00000001FF

code/Makefile

@@ -1,6 +1,6 @@
 TARGET  = main
 SRCS   := $(shell find -name '*.c')
-FILES   = $(SRCS:%.c=%) #main uart avrIOhelper/io-helper #uart#hier alle c-Datein reinschreiben, trennung durch "  " und ohne .c-Endung
+FILES   = $(SRCS:%.c=%)
 MCU     = atmega328p
 PROGC	= m328p
 CC      = avr-gcc
@@ -10,7 +10,7 @@ TOOL    = atmelice_isp
 
 BUILDDIR = Builds
 
-DEFINES = -I . -IInternet/MQTT -I Internet/MQTT/MQTTPacket/src -I Ethernet/W5500 -I Ethernet -DF_CPU=18432000UL -D_WIZCHIP_=W5100
+DEFINES = -DF_CPU=18432000UL
  
 CFLAGS  =-mmcu=$(MCU) -O2 -Wall -Wpedantic $(DEFINES) -std=c99 -ffunction-sections -fdata-sections
 LDFLAGS =-mmcu=$(MCU) -Wl,--gc-sections
@@ -45,11 +45,3 @@ size: $(BUILDDIR)/$(TARGET).elf
 clean:
 	rm -rf $(BUILDDIR)
 
-
-#Fuse m1284p external Osz. Long startuptime
-#  avrdude -c usbasp-clone -p m1284p -U lfuse:w:0xff:m -U hfuse:w:0xd9:m -U efuse:w:0xff:m
-
-#Fuse m1284p internal Osz. Long startuptime
-#  avrdude -c usbasp-clone -p m1284p -U lfuse:w:0xe2:m -U hfuse:w:0xd9:m -U efuse:w:0xff:m
-
-

code/compile_flags.txt

@@ -0,0 +1,7 @@
+-D
+__AVR_ATmega328P__
+-D
+F_CPU=18432000UL
+-I
+/usr/lib/avr/include
+

code/main.c

@@ -1,18 +1,16 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
+#include <stdint.h>
 #include <util/delay.h>
 #include "modbus.h"
 
-#define HIGH_LOW_CYCLE_TIME 1
+#define HIGH_LOW_CYCLE_TIME 10
 
 uint16_t holdingRegisters[4];
 
-void timer0100us_start(void) {
-	TCCR0B|=(1<<CS01); //prescaler 8
-	TIMSK0|=(1<<TOIE0);
-}
+volatile uint32_t led_on_timer[3];
 
-//Return raw ADC data
+// return raw ADC data
 uint32_t HX711_get_data(uint8_t clk_PIN, uint8_t data_PIN, uint8_t gain_for_next_conv){
     uint32_t data = 0;
     for(uint8_t i = 0; i < 24; i++){    //Start 24bit transmission
@@ -67,19 +65,21 @@ void modbusGet(void) {
     {
         switch(rxbuffer[1]) {
             case fcReadHoldingRegisters:
-                PORTC |= 1 << 1;
-//                _delay_ms(10);
-//                PORTC &= ~(1 << 1);
+                PORTC |= 1 << 0;
+                led_on_timer[0]=1000;
+
+                while(PINB & (1<<4)); // wait for data ready
+
                 uint32_t tmp = HX711_get_data(3, 4, 128); 
-                //int32_t tmp = -1000;
                 holdingRegisters[0] = tmp & 0xFFFF;
                 holdingRegisters[1] = (tmp>>16) & 0xFFFF;
+                holdingRegisters[2] = led_on_timer[1];
                 modbusExchangeRegisters(holdingRegisters,0,4);
                 break;
-
-            default: {
+            default:
+                PORTC |= 1 << 1;
+                led_on_timer[1]=1000;
                 modbusSendException(ecIllegalFunction);
-			}
                 break;
         }
     }
@@ -93,16 +93,22 @@ int main(void){
     modbusInit();
     sei();
 
-    timer0100us_start();
+    /* modbus tick timer */
+    TCCR0B|=(1<<CS01);
+    TIMSK0|=(1<<TOIE0);
 
     while(1){
         modbusGet();
-        //PORTC ^= 1 << 0;
-        //_delay_ms(100);
-        //PORTC &= ~(1 << 1);
     }
 }
 
 ISR(TIMER0_OVF_vect) { //this ISR is called 9765.625 times per second
     modbusTickTimer();
+
+    for(uint8_t i=0; i<2; i++){
+        if(led_on_timer[i]>0)
+            led_on_timer[i]--;
+        else
+            PORTC &= ~(1<<i);
+    }
 }