Filamentstr
/
05_wickler
Archived
1
0
Fork 0
Code Issues 3 Pull Requests Releases Wiki Activity

target specific spi funtions

Browse Source
master
Eggert Jung 4 years ago
parent 09e741a3ea
commit 939c3c5e63
2 changed files with 42 additions and 127 deletions
Show Stats Download Patch File Download Diff File

67
22_m1284p_WIZNET_MQTT/spi.c
Unescape Escape View File

@ -1,50 +1,37 @@
#include <avr/io.h>
#include "spi.h"
#include "globals.h"
/*
* Initialize SPI bus.
*/
//~ // From working SPI ENC28J60 driver
//~ #define ENC28J60_CONTROL_PORT PORTB
//~ #define ENC28J60_CONTROL_DDR DDRB
//~
//~ #define ENC28J60_CONTROL_CS PORTB6
//~ #define ENC28J60_CONTROL_SO PORTB3
//~ #define ENC28J60_CONTROL_SI PORTB2
//~ #define ENC28J60_CONTROL_SCK PORTB1
//~ #define ENC28J60_CONTROL_SS PORTB0
//~
//~ // set CS to 0 = active
//~ #define CSACTIVE ENC28J60_CONTROL_PORT&=~(1<<ENC28J60_CONTROL_CS)
//~ // set CS to 1 = passive
//~ #define CSPASSIVE ENC28J60_CONTROL_PORT|=(1<<ENC28J60_CONTROL_CS)
//
//~ #define waitspi() while(!(SPSR&(1<<SPIF)))
void spi_select(void)
{
CS_PORT&=~(1<<CS_BIT);
}
void spi_deselect(void)
{
CS_PORT|=(1<<CS_BIT);
}
void
spi_init(void)
unsigned char spi_xchg(unsigned char val)
{
// CS PIN for FLASH
DDRB |= _BV(WIZNET_CS); // CS to OUT && Disable
SPI_WIZNET_DISABLE();
SPDR = val;
while (!(SPSR & (1 << SPIF))) ;
return SPDR;
}
/* Initalize ports for communication with SPI units. */
/* CSN=SS and must be output when master! */
DDRB |= _BV(MOSI) | _BV(SCK) | _BV(CSN);
PORTB |= _BV(MOSI) | _BV(SCK);
uint8_t spi_read(){
return spi_xchg(0x00);
}
/* Enables SPI, selects "master", clock rate FCK / 4 - 4Mhz, and SPI mode 0 */
SPCR = _BV(SPE) | _BV(MSTR);
#if defined(SPI_8_MHZ)
SPSR = _BV(SPI2X); //FCK / 2 - 8Mhz
#elif defined (SPI_4_MHZ)
SPSR = 0x0; //FCK / 4 - 4Mhz
#else
SPSR = 0x0; //FCK / 4 - 4Mhz
#endif
void spi_write(uint8_t d){
spi_xchg(d);
}
void spi_init(){
CS_PORT |= (1 << CS_BIT); // pull CS pin high
CS_DDR |= (1 << CS_BIT); // now make it an output
SPI_PORT |= (1 << 0); // make sure SS is high
SPI_DDR = (1 << PORTB2) | (1 << PORTB1) | (1 << PORTB0); // set MOSI, SCK and SS as output, others as input
SPCR = (1 << SPE) | (1 << MSTR); // enable SPI, master mode 0
SPCR |= (1 << SPR0) | (0<<SPR1); // div 128
SPSR |= (0 << SPI2X); // set the clock rate fck/2
}

98
22_m1284p_WIZNET_MQTT/spi.h
Unescape Escape View File

@ -1,92 +1,20 @@
#ifndef SPI_H_
#define SPI_H_
#ifndef _SPI_H_
#define _SPI_H_
/* SPI input/output registers. */
#define SPI_TXBUF SPDR
#define SPI_RXBUF SPDR
#include <avr/io.h>
#define BV(bitno) _BV(bitno)
#define SPI_PORT PORTB /* target-specific port containing the SPI lines */
#define SPI_DDR DDRB /* target-specific DDR for the SPI port lines */
#define SPI_WAITFOREOTx() do { while (!(SPSR & BV(SPIF))); } while (0)
#define SPI_WAITFOREORx() do { while (!(SPSR & BV(SPIF))); } while (0)
//M128
//#define SCK 1 /* - Output: SPI Serial Clock (SCLK) - ATMEGA128 PORTB, PIN1 */
//#define MOSI 2 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA128 PORTB, PIN2 */
//#define MISO 3 /* - Input: SPI Master in - slave out (MISO) - ATMEGA128 PORTB, PIN3 */
//#define CSN 0 /*SPI - SS*/
//#define FLASH_CS 6 /* PB.6 Output as CS*/
//M644p/M1284p
#define SCK 7 /* - Output: SPI Serial Clock (SCLK) - ATMEGA644/1284 PORTB, PIN7 */
#define MOSI 5 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA644/1284 PORTB, PIN5 */
#define MISO 6 /* - Input: SPI Master in - slave out (MISO) - ATMEGA644/1284 PORTB, PIN6 */
#define CSN 4 /*SPI - SS*/
//#define FLASH_CS 3 /* PB.2 Output as CS*/
//#define FLASH_CS 2 /* PB.2 Output as CS*/
//#define CAN_CS 1 /* PB.1 Output as CS for CAN MCP2515*/
//#define SPI_FLASH_ENABLE() ( PORTB &= ~BV(FLASH_CS) )
//#define SPI_FLASH_DISABLE() ( PORTB |= BV(FLASH_CS) )
#define WIZNET_CS 3 /* PB.3 Output as CS for Wiznet ETHERNET*/
#define SPI_WIZNET_ENABLE() ( PORTB &= ~BV(WIZNET_CS) )
#define SPI_WIZNET_DISABLE() ( PORTB |= BV(WIZNET_CS) )
#define SD_CS 0 /* PB.0 Output as CS for SD-reader*/
#define SPI_SD_ENABLE() ( PORTB &= ~BV(SD_CS) )
#define SPI_SD_DISABLE() ( PORTB |= BV(SD_CS) )
/* Define macros to use for checking SPI transmission status depending
on if it is possible to wait for TX buffer ready. This is possible
on for example MSP430 but not on AVR. */
#ifdef SPI_WAITFORTxREADY
#define SPI_WAITFORTx_BEFORE() SPI_WAITFORTxREADY()
#define SPI_WAITFORTx_AFTER()
#define SPI_WAITFORTx_ENDED() SPI_WAITFOREOTx()
#else /* SPI_WAITFORTxREADY */
#define SPI_WAITFORTx_BEFORE()
#define SPI_WAITFORTx_AFTER() SPI_WAITFOREOTx()
#define SPI_WAITFORTx_ENDED()
#endif /* SPI_WAITFORTxREADY */
#define CS_DDR DDRJ /* target-specific DDR for chip-select */
#define CS_PORT PORTJ /* target-specific port used as chip-select */
#define CS_BIT 3 /* target-specific port line used as chip-select */
uint8_t spi_read();
void spi_write(uint8_t d);
void spi_select(void);
void spi_deselect(void);
unsigned char spi_xchg(unsigned char val);
void spi_init(void);
/* Write one character to SPI */
#define SPI_WRITE(data) \
do { \
SPI_WAITFORTx_BEFORE(); \
SPI_TXBUF = data; \
SPI_WAITFOREOTx(); \
} while(0)
/* Write one character to SPI - will not wait for end
useful for multiple writes with wait after final */
#define SPI_WRITE_FAST(data) \
do { \
SPI_WAITFORTx_BEFORE(); \
SPI_TXBUF = data; \
SPI_WAITFORTx_AFTER(); \
} while(0)
/* Read one character from SPI */
#define SPI_READ(data) \
do { \
SPI_TXBUF = 0; \
SPI_WAITFOREORx(); \
data = SPI_RXBUF; \
} while(0)
/* Flush the SPI read register */
#ifndef SPI_FLUSH
#define SPI_FLUSH() \
do { \
SPI_RXBUF; \
} while(0);
#endif
#endif /* SPI_H_ */