93 lines
2.3 KiB
C
93 lines
2.3 KiB
C
#include <avr/io.h>
|
|
#include <util/delay.h>
|
|
#include <stdio.h>
|
|
#include <avr/interrupt.h>
|
|
|
|
#include "kraftsensor.h"
|
|
#include "modbus.h"
|
|
#include "common.h"
|
|
|
|
int32_t kraftsensor_value;
|
|
uint8_t kraftsensor_valid;
|
|
|
|
void timer2_init()
|
|
{
|
|
TCCR2A = (1<<WGM21); //TIMER0 SET-UP: CTC MODE
|
|
TCCR2B|=(1<<CS21); //prescaler 8
|
|
OCR2A = 200;
|
|
TIMSK2|=(1<<OCIE2A);
|
|
}
|
|
|
|
void kraftsensor_init(){
|
|
modbusSetAddress(1); //better set this to sth.
|
|
modbusInit();
|
|
timer2_init(); // modbus tick timer
|
|
}
|
|
|
|
void do_kraftsensor(){
|
|
uint16_t m_data[4];
|
|
|
|
readReg(1,0,2);
|
|
if(wait_receive(2, m_data, 10))
|
|
kraftsensor_valid = 0;
|
|
else{
|
|
kraftsensor_valid = 1;
|
|
int32_t tmp = (uint32_t)m_data[0]<<16;
|
|
tmp |= m_data[1];
|
|
kraftsensor_value = ((tmp + 539363)*9.81)/177.380;
|
|
}
|
|
|
|
}
|
|
|
|
uint8_t wait_receive(uint8_t len, uint16_t dest[], uint8_t timeout){
|
|
|
|
uint8_t breaker = timeout;
|
|
while(!receiveOkay && breaker) { //wait for client response, time out after 1s
|
|
breaker--;
|
|
_delay_ms(10);
|
|
}
|
|
|
|
if(receiveOkay) { //if this fails, there was either no response or a crc error
|
|
if(rxbuffer[1]&0x80) { //client responded with an error code
|
|
//handle the error
|
|
printf("error\n\r");
|
|
return -1;
|
|
}
|
|
else {
|
|
for(uint8_t x=0;x<len;x++) { //rxbuffer[2] should be 8 (4 registers => 8 bytes). You might want to check this at this point.
|
|
dest[x]=(rxbuffer[3+x*2]<<8)+rxbuffer[4+x*2]; //do sth with the acquired data.
|
|
}
|
|
}
|
|
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void readReg(uint8_t slaveid, uint16_t address, uint8_t amount) {
|
|
_delay_ms(2);
|
|
rxbuffer[0]=slaveid;
|
|
modbusSetAddress(slaveid);
|
|
rxbuffer[1]=0x03;
|
|
rxbuffer[2]=(address>>8)&0xFF;
|
|
rxbuffer[3]=address&0xFF;
|
|
rxbuffer[4]=0x00;
|
|
rxbuffer[5]=amount;
|
|
modbusSendMessage(5);
|
|
}
|
|
|
|
void writeReg(uint8_t slaveid, uint16_t address, uint16_t value) {
|
|
_delay_ms(2);
|
|
rxbuffer[0]=slaveid;
|
|
modbusSetAddress(slaveid);
|
|
rxbuffer[1]=0x06;
|
|
rxbuffer[2]=(address>>8)&0xFF;
|
|
rxbuffer[3]=address&0xFF;
|
|
rxbuffer[4]=(value>>8)&0xFF;;
|
|
rxbuffer[5]=value&0xFF;
|
|
modbusSendMessage(5);
|
|
}
|
|
|
|
ISR(TIMER2_COMPA_vect) { //this ISR is called 9765.625 times per second
|
|
modbusTickTimer();
|
|
}
|